Satellite Pro A200-1NB - Can I use Windows 7 64bit?

This is my laptop: Satellite Pro A200-1NB Part Number : PSAE7E-00V00CG3
http://eu.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=EU&ACTION=PROCESS_DETECTION& TYPE=FORWARD&SOURCE=SMP&COUNTRY=&QSA=TRUE&MODEL=Sa tellite+Pro+A200&SERIAL=97348001K&service=EU&LOCAL E=&OSBUILD=7600&SUB_TYPE=SMP&OSBITSIZE=32&PANUMBER =PSAE7E-00V00CG3&ERROR=0
Can I use it on Windows 7 x64? I see that there are not all drivers present in 64bit version so I want to know if everything will work property with 64 bit Windows?
Thanks for reply
Mario

Hi buddy,
Youre right. According the Toshiba European driver download for Windows 7 64bit are not all drivers available. I have checked the downloads for Vista 64bit and therefore all drivers you need are available.
Vista and Windows 7 drivers are similar so you can try to use the Vista 64bit drivers. The most Vista drivers also work on Windows 7.
Furthermore if something will not work you can use other drivers from Satellite A300 for example. This notebook supports Windows 7 64bit and the drivers should be similar I think.
Good luck! :)

Similar Messages

  • Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

    Hii!
    Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
    The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
    Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
    Also...
    Whats the deal with BIOS?:S
    I dont understand!
    If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
    As i have to download the new drivers before upgrading yes?
    Thanks!

    Of course the Recovery CD will work.
    The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
    > Whats the deal with BIOS? I dont understand!
    > If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
    In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
    Some A200 Satellite series needs a BIOS update if you want to use the XP.
    In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
    Best regards

  • Satellite Pro P300-26U - Can I use a second HDD?

    Satellite P300 family support raid0 and double HDD. All model? User manual of 26U don't say any word about this. Model like P300-1BP has double HDD.
    Can someone help me? I want to buy a P300-26U in Italy.
    Thanks.
    Guido

    Hi
    The Satellite P300 series doesnt support RAID!
    There is NO RAID controller on the motherboard.
    But you are right; the Satellite Pro P300-BP supports 2 HDDs but this does not meant that it would support RAID!
    Furthermore you should know that P300 series supports different hardware specifications.
    This means that not all P300 would be able to use 2 HDDs!!!
    It could be possible that Satellite Pro P300-26U is not able to use 2 HDDs even though the Satellite Pro P300-BP support 2 HDDs.

  • Satellite Pro A100-830 - Can I install Windows 7?

    Should i just be able to do a clean install of WIndows 7 of this laptop?
    Will i need to do anything funny with the bios or drivers?
    Thanks

    Hi
    You would be able to install the Win 7definitely
    But you could get some tiny problems with driver installation.
    Whybecause Win7 drivers have not been released for this notebook series.
    But this should not be a reason not to install the Win 7 OS.
    In most cases the Win 7 would find the drivers automatically but you will need to search some drivers
    Here is a nice instruction how to identify an unknown device and to find an right driver for any OS:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Satellite Pro A200-1F9 - FN buttons dont work

    Hi
    My laptop is Satellite Pro A200-1F9 (PSAE7E-007003EN) with Windows Vista Business x64 recently I have swapped my WLAN Wi-Fi card , from standard Intel pro ABG to Realtek 8191SE "N".
    Card is recognized and visible in device manager, all drivers are installed, but no network available. System doesnt see any network. In addition I can't find and install proper TVAP which will allow me use FN+F8 combination.
    Can somebody help me please solve that problem?

    This notebook model is not supported for Win7 64bit. Try to use Toshiba value added package for Satellite Pro P300.
    You can find it here .
    Post some feedback.

  • Re: Satellite Pro A200 - Won't boot with 4GB RAM

    Hi,
    I've installed 2 x 2GB, but it seems it doesn't work. The funny thing is that when running just one memory strip (so 2GB) it works, when running both it doesn't work and it freezes. These are the Samsung 2GB 2Rx8 PC2 - 6400s - 666 - 12 - E3
    Ive' installed the latest BIOS update (64bit v2.60) for the Satellite Pro A200 and I am running Windows 7 64bit

    Hi caribman
    What Satellite Pro A200 you have exactly?
    I ask this because some A200 models were equipped with Intel 943GML chipset and these models support 2GB only!!!

  • Satellite Pro A200 - external screen resolution

    Hi,
    Does integrated graphic card Intel GMA X3100 in my satellite pro A200 notebook can support 1920x1200 resolution?
    I want to buy an external 24" monitor. Will it work in the native resolution?
    Thanks!

    Thank you Eldorado :)
    > {quote:title=Eldorado wrote:}{quote}
    > What does the Satellite Pro A200 manual said?
    > Did you check it???
    Yes, I checked it but there's no supported resolution listed :| and I'll check the manual again... Nope! nothing about graphic card at all! No resolutions... nothing.
    Maybe I'm missing something?!?
    > {quote:title=Eldorado wrote:}{quote}
    > The notebook supports these CRT resolutions on external TV:
    I have s-video and RGB connector (D-sub) on my notebook and I suppose there's no difference if I'm plugging external CRT or LCD monitor?
    Thank you.

  • What internal HD can I use on my Satellite Pro A200 PSAE1E-01700EN5

    I need to replace my laptop's broken internal HD. I was wondering, what internal HD can I get for Satellite Pro A200 PSAE1E-01700EN5?
    The only one available for me to order for cheap is 250Gb large, but will my laptop support it? I had 80Gb previously.

    I don't understand why you think your notebook is old generation. Between your A200 and my A300 is not much difference.
    Both use the same HDD. My Satellite A300 has maybe other hardware platform and thats all.
    I am 100% sure you can use 250 GB HDD in your Satellite A200.

  • Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

    Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
    A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
    -What to do?
    CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
    Best regards
    /peter

    Hi Peter,
    Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
    Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
    In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

  • Satellite Pro A200: Windows cannot find WLan

    Something's wrong with my laptop, I have Toshiba Satellite Pro A200 with XP Pro SP3...
    When I try to search for wireless networks using Microsofts program, it can't find anything, but TOSHIBA's ConfigFree can.
    You probably say, that well use Toshiba's software then - that's not possible, cause ConfigFree supports only WEP keys, but most of Wireless keys used here are WEP-TSK or something - not supported by ConfigFree.
    How can I make my Microsoft Windows to detect Wireless routers?

    I knew it, but I just had to make sure.
    I shall never install SP3 again.
    To all people, DO NOT INSTALL SP3!!
    Unless you don't have it allready preinstalled, in that case, it won't do any harm.
    Case closed.

  • Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

    Hi everybody
    I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
    Any suggestion?

    Hi
    Never had any problems with the touchpad using Win 7 32bit.
    I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
    Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
    Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
    <img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

  • Satellite Pro A200 - Fn keys does not work with Windows Vista

    Hello,
    I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
    Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
    BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
    After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
    This doesn't seem to be true or not completely true.
    Here is what happens.
    - Before the installation of the "Value Added Package" all the Fn keys didn't work.
    - After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
    - If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
    There is no way (or I didn't find a way) to make all the Fn keys working.
    Does anybody know how to solve this problem?
    Thanx in advance,
    mme000

    I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
    Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

  • Satellite Pro A200 Windows XP, 4Gb SDHC Card does not work.

    Hi,
    I have had a Satellite Pro A200 installed with Windows XP, SP2 for some time - No problems there, a great piece of kit. However I recently have bought a new camera and splashed out on a Kingston 4Gb SDHC card. The manual for my A200 seemes to indicate that it my laptop is compatible with SDHC cards to 4Gb however when I push the card in the LED flashes blue briefly and then nothing happens. My SDHC card does not appear to be recognised by the system.
    I see no errors in my OS event log and I have checked the slots operation by trying an older 512Mb SD card and that works fine.
    Can anybody offer any help please?
    For reference this laptop is a Model PSAE4E A200.
    Many Thanks in advance
    Simon

    If the above fix does not work (which it didn't for me on a Satellite Pro A100 running XP), try
    [http://support.microsoft.com/kb/923293] .
    That one did the trick

  • Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

    I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
    The Vista licence specifically also licences XP.
    Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
    I would also like, as a third boot, Red Hat Linux 9.
    Any comments ?

    Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
    Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
    So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
    If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
    Best regards

  • HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

    uhm hey guys,
    idk where else to get help so ima try here,
    i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
    do you know what i should install ?
    but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
    Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Maybe you are looking for