Satellite Pro A200 doesn't charge if running

Hello
I have a new Toshiba Satellite Pro A200 running Vista. I have a problem with the mains adapter and charging.
It will boot up and operate fine, and when switched off will charge the battery on mains fine. But when switched on, the machine automatically runs off battery, not mains, and does not charge.
This means that the battery runs down and eventually has to be charged again whilst off.
When the mains adapter is removed and reinserted, it initially will charge for maybe 30 seconds, then stops charging again and continues to run off battery.
At the same time, the blue indication light on the front of the machine lights up to indicate that the AC is connected and detected, and on the battery indicater on windows in states 'ac connected, battery not charging' - in other words it the ac works and is detected but the machine isnt using it to run power or charge unless switched off..
Can anyone offer a solution?
thanks

Thats very strange and I presume this issue could be related to the hardware problem.
Either its a faulty battery or there is something wrong with the power supply electronic on the motherboard.
In my opinion there is only one way to find out whats wrong some diagnostic test are necessary.
Such test can be performed only by an ASP technician.
Therefore its really advisable to contact an ASP in your country for some checks.
This is a new notebook and the warranty should cover everything!

Similar Messages

Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

Hi everybody
I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
Any suggestion?

Hi
Never had any problems with the touchpad using Win 7 32bit.
I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
<img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

Why doesn't any of the Function/Hotkeys work on Satellite Pro A200?

I have been researching for almost two hours now and found no solution.
What I would like to do is to be able to use the Fn Key for the hotkeys on the F0-F12 buttons, such as Fn+Esc to mute sound, or Fn+F6/F7 to adjust brightness on my screen. I am running Windows XP, that information is needed. The things I have tried so far was installing some of Toshiba Utilities, such as the Fn-Accessibility and Fn-esse, but they are still not working.
I have no idea why they haven't been working since I first got my laptop. Please help! Thank you!!!

I'm sorry about that, i thought this thread was undet the A-200 thread. Anywho I have the Toshiba Satellite Pro A200, i'm not quite sure of the model number...when i use SIW it says
Version: PSAF4U-00D004 but that does not match any other models on this website...
Also, i read in the forums that if you convert your laptop to XP when it was originally Visa you had to download many drivers to have access to all the hotkeys. All i want to do is to have the screen brightness adjustment hotkey, how can I do that?
Somewhere in the forums said that I had to download the Power Saver Toshiba Utility driver and i have already done so but still does not work...None of my hotkeys work
Message was edited by: sammykim

Satellite Pro A200 with Vista doesn't see other XP notebook in the network

I have Satellite Pro A200 Toshiba and I have some problems with the network.
The Inernet is upp and going but I cant find the other computers in my network.
Im having 3 other computer in a network. The A200 is having Vista and the other one is having just XP-pro and XP-home.
The network by the tree standalone is working fine but the laptop is not present in the network.
I've have checked the workgroup so it the same.
Is there anyhone thats having any idea how or whats the problem?

Hi again. Ive discovered how to solve the problem! Its the Norton Internet security thats causes the problem.
Just open the program, right click at the icon down at right, click at "Norton Protection Center"
Click on the "Norton Internet Cecurity", Wirewall settings, Commin Settings, Common Rules, Configurate,
Scroll down to "Standard-Block filesharing in Windows" Mark and "Modify", Mark the option "Allow" Save and go!
If You have understand what Ive written it should be working, the thing is that I have Swedish versions of all the software
so it might be a littel hard to understand the translation that Ive done. Try to use it and look for the most likness of my poor English.
regards
/bejjo
Message was edited by: ADMIN

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Re: Satellite Pro A200 - Won't boot with 4GB RAM

Hi,
I've installed 2 x 2GB, but it seems it doesn't work. The funny thing is that when running just one memory strip (so 2GB) it works, when running both it doesn't work and it freezes. These are the Samsung 2GB 2Rx8 PC2 - 6400s - 666 - 12 - E3
Ive' installed the latest BIOS update (64bit v2.60) for the Satellite Pro A200 and I am running Windows 7 64bit

Hi caribman
What Satellite Pro A200 you have exactly?
I ask this because some A200 models were equipped with Intel 943GML chipset and these models support 2GB only!!!

Satellite Pro A200 (PSAE4): DVD drive permanently blinking

Hello,
I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
Any help would be really appreciated.
Thanks !

Hi
According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
Am I right?
To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
What do you think?

Satellite Pro A200 - Is 26 minutes of battery life normal?

Hi All,
My Satellite Pro A200 laptop is just over 1.5 years old (or young :P) and I have a huge problem with the battery - it only lasts for a total of _26 minutes_ under "high performace" mode in Vista - other power modes increase the time by only 5-7 minutes.
I have tweated the system setup to:
- run as few programs at startup;
- to use as little memory in relation to graphics (as in diabled vista themes, and "fancy" operations such as show contents of window whilst dragging).
- remain on the lowest brightness level.
The programs that do run on startup are my anti virus (F-Secure), and ATI catalyst control.
I have also cleaned the registry of any conflicts and regularly virus scan.
I have used Ubuntu on this laptop as well and the battery life is not that much better, which brings me to the conclusion that the battery is nearing its end.
I was wondering if this battery life time (26 minutes max on high performace) is normal for a laptop after only 1.5 years?* (I don't remember how long it lasted when I first bought it).
Also, I have a laptop from other manufacturer of 2 years and the charge of its battery lasts a minimum of 4 hours (on Windows XP).
Both notebooks batteries are 6 cell.
Any suggestions of how to improve my battery life?
Thanks in advance.

>Satellite Pro A200 laptop is just over 1.5 years old and I have a huge problem with the battery - it only lasts for a total of 26 minutes under "high performace" mode in Vista
The battery working time depends on different factors:
If different hardware parts like CPU, GPU, HDD, ODD, display are running with highest performance then your battery working time will decrease dramatically
Additionally if you would lose an stronger battery (9 cell or 12 cell) then you should be abele run the notebook much longer using battery power.
Furthermore the battery loses the own performance systematically and after a long time of usage you will have to replace the battery.
However, if you want you could check the Vista Power Options in order to increase the battery working time:
Here is a nice article:
How to handle the power management features of Windows Vista
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
But in worst case you will need a new, stronger battery

Satellite Pro A200: XP + Vista installed/dual boot possible?

Hi,
I am not sure if I am right here at XP OS but I post it as it is OS related.
My Satellite Pro A200 (PSAE7) runs smoothly with XP but I want to create a sandbox (partition) for/with Vista.
Basically I know that it is possible to run XP and Vista on one system. *But*, Satellite Pro A200 notebooks are shipped with a BIOS for XP and one for Vista and with information that you have to install the correct one. For me this means that you have to install BIOS for XP when running XP and BIOS for Vista when running Vista.
Question:
Is it possible to install Vista on a Satellite Pro A200 with XP as main OS and having so XP BIOS installed?
Boot loader would be Acronis OSS as this loader already manage my two XP partitions.
Many thanks for any information!
Best regards,
Andreas

Hi
In my opinion there are no serious reasons why you shouldnt be able to use Xp and Vista on your Satellite Pro A200.
Ok there are different BIOS for Vista 64bit, 32bit and Win XP but your Vista should run also using the BIOS for Win XP.
Ive got other Satellite notebook series and Im able to use XP and Vista at the same time. I mean Ive got a choice to boot either the XP or Vista ;) and Im still using the old BIOS version.
Ok some functions are not available like FN keys but this is not very important for me.
Well, to cut this story I think you can use Vista and XP without changing the BIOS ;)

Satellite Pro A200-PSAE7: Blue Screen error - ati2dvag infitive loop

I've got Satellite Pro A200-PSAE7 with ATI HD2600 Mobility Radeon. I've downgraded to XP SP2. I get blue screen saying that ati2dvag went infitive loop quite constantly. Any solution to this?
Offtopic: Why standart display drivers from ati.com does not work? (while on my friends laptop with also hd2600 mobilty radeon works fine).

Hi
> I've got Satellite Pro A200-PSAE7 with ATI HD2600 Mobility Radeon. I've downgraded to XP SP2. I get blue screen saying that ati2dvag went infitive loop quite constantly. Any solution to this?
Usually the BSOD appears due to the serious software issue or hardware malfunction.
In my opinion its a software (driver) issue.
I presume the BSOD appears why playing some games in most cases the graphic driver must be updated.
If the XP driver from the Toshiba page will not help you could try the graphic drivers from the www.omegadrivers.net site. The 3rd party drivers should run on your notebook. But note; 3rd party drivers can be used only at your own risk!
> Why standard display drivers from ati.com do not work? (While on my friends laptop with also hd2600 mobility radeon works fine).
The original ATI drivers cannot be installed on a easy way because such drivers dont support an overheating protection. The Toshiba GPU drivers are a little bit modified and support an overheating protection. Such protection is necessary and important because the notebook graphic cards are not equipped with huge cooling module like the GPUs on for the desktop PCs.
The temperature increases on the notebooks much faster and therefore the graphic driver have to control the GPU performance to decrease the internal temperature.
Therefore its always advisable and recommended to use the Toshiba drivers ;)

Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
-What to do?
CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
Best regards
/peter

Hi Peter,
Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

Satellite Pro A200 PSAE4E - WLan speed regularly drops out

Hi
Does anyone know what causes my laptop to lose wifi on a regular basis? It is a Satellite Pro A200 PSAE4E running on XP. I purchased the laptop new back in February and it came with Vista loaded but the wifi kept dropping out and was advise to swap to XP as it was more stable.
When the wifi drops, the Wirless Connection Icon disappears completely from the sys tray as though it never existed although the wifi light just under the front edge remains on. Looking in the network connection in the control panel the wifi is not listed.
I have to shut down the laptop and reboot so that I can carry on working online.
I've downloaded the latest driver for the Atheros AR5007EG and I rang Toshiba support.
Anyone got any ideas - I'm disappointed with the performance of the WLan.

Ive got the same model, and had the same issue with the Wireless Card today (otherwise its been fine for 4 months). I was confused by the card not appearing in the device manager - like it was totally wiped from the system. I rebooted a few times and it did still not appear.
Left the laptop and did something else for a while, and on rebooting the card reappeared and the Wireless connection was remade.
I also have the same question: What causes all trace of a device to disappear - rather than the card to be shown but with an exclaimation mark showing there was some sort of conflict which might help us to sort the cause of the problem.
Have you had any help from anywhere else?

Satellite Pro A200 - Shows only 3GB instead 4GB RAM

Hi,
2 years ago I got a Satellite Pro A200 as a business notebook and it runs with XP SP2, later with SP3. With 2 GB it shows 2 GB of memory in Windows - and I know it has a Radeon 7500 with 256MB of individual graphic memory, and it has no shared memory.
I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
So where is the memory? It looks like a bug - the memory chips have both 2 GB I have verified this. Because it is a company notebook I can't just upgrade to XP 64 bit :-(
In the BIOS are no options - first I thought it's the graphic card, but mine has independant graphics with own memory so the computer comes up with 2048 MB or 4096 after the upgrade.
Shared memory would show about 1900 MB of RAM to the OS like my private EEEpc.

> I upgraded it to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and the ATI system monitor shows 4 GB. I know that 4 GB is not possible in XP 32 bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems I have seen values between 3.3 and 3.7 GB.
First of all 32bit OS (no matter if its XP, Win 2003 R2, Vista or Win 7) will not recognize 4GB RAM but only 3.2GB (and not 3.7GB)
I have no idea where you looked for available RAM but you should run DXDIAG in RUN.
Then you should get some details and also the available RAM.
Secondly the graphic card supports Local cache (256MB) and HyperMemory.
HyperMemory of the graphic card depends on the available main RAM memory.
For example the unit supports 1024MB RAM (1GB) then the hyper memory would be 256MB this part of RAM would be shared with graphic card!
This is the reason why the only 3GB are shown...
PS: regarding such comments and a tip:
> hey man please think before you answer.
This is a community and all people here try to help each other so be always thankful for all kind of answers

Satellite Pro A200 - question about BIOS update

I have a Satellite Pro A200 (PSAE7E) with Windows Vista and XP that were installed recently.
In Toshiba's driver page (BIOS update) says:
"This Bios is only compatible for Notebooks with Windows Vista!!!!"
1) Should I update my BIOS(1.4) or is it going to be a problem for my XP windows?
2) Has anyone try it?
3) Is there documentation about the BIOS updates (bug fixes, etc)?

Hi madmak
I think the description should be clear if the BIOS description says that the BIOS is only compatible for notebooks with Windows Vista then you cannot use it with Windows XP.
I think nobody should check if an Vista BIOS would be run on the XP notebook because mostly a wrong BIOS can damage the motherboards ROM on in your case some notebook features will not run correctly.
I didnt find also any reports about any fixed BIOS bugs it seems something like that was not published on Toshiba European site.
best regads and happy new year ;)

Satellite Pro A200 - Hard Drive has lost half it's memory

I have a toshiba Satellite Pro A200 running Vista. Vista came preloaded and I don't have any discs for it. I have had it since new (Sept 2007). The hard drive is split into drives. Recently my C drive has competely filled up and I now have no space left (55gigs gone) I store no data in this drive. All my media (music, photos, other files) is in my E drive. I have to run C Cleaner each time I boot up in order to have enough space to operate the computer. I also have to delete all but the most recent restore point in order to function.
I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to 'new'? I have all my files backed up on an external hard drive so I don't mind starting from scratch. Bearing in mind I have no install discs as Vista came pre-loaded.
Can anyone help????? please!

If you don't have any disc and if you didn't get any disc with your notebook that means your notebook was delivered with HDD recovery image and this image is saved on second HDD partition in folder called HDDRecovery.
Recovery disc can be created using preinstalled Toshiba recovery disc creator. I don't know if you still have all this.
The whole story with HDD is somehow strange to me. If your notebook has two partitions and partition C is full I am asking myself what is with second partition. It must be pretty empty.
What is capacity of second HDD partition?
What is free space on this second partition?
You wrote about E drive. What is E drive?
You must understand that nobody of us know what are you doing exactly, what programs are installed on your notebook. You wrote about no saving data on partition C. Maybe you are wrong about it. Maybe you download many torrents and they are saved somewhere on HDD. who knows?
Do you have some friends with good PC knowledge? Try to find someone who can take a look onto preinstalled system and check what is going wrong there.

Satellite Pro A200 doesn't charge if running

Similar Messages

Maybe you are looking for