Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
The Vista licence specifically also licences XP.
Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
I would also like, as a third boot, Red Hat Linux 9.
Any comments ?

Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
Best regards

Similar Messages

Satellite Pro A200: How to reboot from hibernation

I must be an idiot.
I set on/off button of new Satellite Pro A200 to activate hibernation.
Then set BIOS password. Despite password correctly entered, it will not start windows.
Nor can I shut down laptop by holding down the on/off button to force reboot.
So
1) how do I reboot short of waiting till the batterys run flat...... And
2) when and if I do manage a reboot, which key (s) should I hold down to enter BIOS.
Many thanks for help.

> Despite password correctly entered, it will not start windows.
>Nor can I shut down laptop by holding down the on/off button to force reboot
Do you have a Phoenix BIOS? If yes then you have to press the F2 button immediately after notebook starting to access the BIOS. But you will be not able to access the BIOS if the password is not right and cannot be verified!
The unknown BIOS password can be deleted only by an ASP in you country. There is a special procedure which is only known to the Toshiba authorized service technicians.
Therefore follow the recommendation and contact the guys!
PS: The notebook should shut down when you press the power button for about 4-5sec.
Otherwise disconnect the AC and remove the battery to disable the computer!

Satellite L500/013 - How to make dual boot of Windows 7 and XP?

Hi
I just bougth my first Toshiba laptop, it comes with Windows 7 Professional pre-installed. Before I start spending hours on this, I am just wondering if this can be done:
1) I would like to use the Windows 7 Professional in 64 bit mode and then
2) Create second partition on HD to install Windows XP 32 bit on it.
Just wondering about if this is possible and what is the recommended sequence for the install is. First thing I need to do is to create recovery disk for Windows 7, so I assume I need to configure Windows 7 first?
Thanks for any help
Thomas

> First thing I need to do is to create recovery disk for Windows 7, so I assume I need to configure Windows 7 first?
Well, this is strongly recommended!!! Before you would do anything with your HDD you should create the recovery disk!!!
Im not quite sure how you could set up an dual boot using Win 7 because I didnt try this but I did it using Vista.
First of all you have to create an second partition in Vista. This could be done in Disk Management.
Then I installed Win XP on the second partition. But after the XP installation I could not start Vista because Vista boot manager was damage by Win XP.
To fix this I have used a original Vista disk (not recovery disk). I booted the Vista DVD and this has repaired the Vista boot manager. In Vista I have installed EasyBCD.
EsayBCD is a small tool which helped to add the Win XP to the Vistas boot manager.
After new reboot Vista and Win XP appeared in the boot manager and I could choose between both OS.
I think you will need the same procedure using Win 7

How do I dual boot my 2012 baseline 13" MacBook Pro?, How do I dual boot my 2012 baseline 13" MacBook Pro?

I have the baseline 2012 13" MacBook Pro (2.5GHz Intel Core i5, 4GB Ram, OSx 10.8.2) and I have a copy of Windows 7 Professional 64 bit that I got from my school (burned iso to a disk) and I can get the registration code from them too. So will I be able to use this to dual boot with my mac? Thanks!

YES.
Follow this:
http://www.youtube.com/watch?v=OM2495dmO0I
Also you can move liscense keys between computers.

Satellite pro A200 won't start up / boot

Hi,
my laptop is refusing to startup beyond the windows loading page, I disabled automatic restart and the message on the blue screen says:
STOP: c0000221 {Bad Image Checksum} The image oleaut32.dll is possibly corrupt. The header checksum does not match the computed checksum.
Does anyone know what I need to do?
Thanks in advance for any help.
Donal

Satellite Pro A200-16Y
Bug Check 0xC0000221: STATUS_IMAGE_CHECKSUM_MISMATCH
This indicates that a driver or a system DLL has been corrupted.
This bug check will display a descriptive text message. The name of the damaged file is displayed as part of the message.
Please give us the name of the file from the blue screen. If a path is available, be sure to include that.
If you have located an installation CD, learn to access the Recovery Console.
Description of the Windows XP Recovery Console for advanced users
-Jerry

Cannot install WinXP on Satellite Pro A200 - No HDD

Hi,
Please can someone help me. I've just brought 52 Satellite Pro A200 laptops. They come with Vista pre-installed, but I want to wipe them and install Windows XP. However I have a big problem - when I put my XP CD in and boot from it and click Enter to continue, it tells me that the Installation cannot continue as Windows found no hard drives (although I can boot in Vista so I know the HDD are ok).
Thanks for looking,
Matt Courtman
Cromwell Community College, UK

I too had the HDD problem. Its because there are no drivers on the XP CD for SATA hard drives. What you have to do is use some free software called NLite and merge the SATA drivers with the files off the XP CD. (It really is ace). Available at
http://www.softpedia.com/get/System/OS-Enhancements/nLite.shtml
Read this page it tells you exactly how to do it.(
http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml). If I can manage it then anyone can. Using the NLite software you copy the contents of your XP CD to your hard drive. Then you download the SATA drivers (available from the tosh site), then you integrate the drivers with your XP CD files. Finally you create an ISO image and burn it to CD. When you then boot off your new CD and install XP, it detects the SATA drive. Hey Presto!!!

Satellite Pro A200-1F9 - FN buttons dont work

Hi
My laptop is Satellite Pro A200-1F9 (PSAE7E-007003EN) with Windows Vista Business x64 recently I have swapped my WLAN Wi-Fi card , from standard Intel pro ABG to Realtek 8191SE "N".
Card is recognized and visible in device manager, all drivers are installed, but no network available. System doesnt see any network. In addition I can't find and install proper TVAP which will allow me use FN+F8 combination.
Can somebody help me please solve that problem?

This notebook model is not supported for Win7 64bit. Try to use Toshiba value added package for Satellite Pro P300.
You can find it here .
Post some feedback.

Satellite Pro A200 PSAE7: Where to get the ATI driver for Win XP

Hi,
I have bought Toshiba Satellite Pro A200 PSAE7 and it was with Vista on from the beginning. I decided to upgrade (/downgrade) it to XP but there's problem with driver to graphic card (Radeon HD 2600 Series).
I can't find anywhere ati drivers (actually I found it on ati.amd.com site, but on this forum I read that Toshiba drivers are modified so that Radeon won't be overheating) and I'm wonderig if Vista ones will run on XP (I've downloaded all drivers but ati one)?
...and is it possible to downgrade my Vista to XP Pro through Miscrosoft site (or something like that) or do I have to reinstall it using my old copy (provided with old Toshiba)?
Ps.
Sory for my English
Ps2.
Is it so important to install drivers in proper order?

> When trying to download driver from Toshiba web I get message:
>"This software has not been officially tested and therefore must be at the users own risk."
>I agree, but still can't download it.
You have to switch the option to Accept!!! Then the button Download will be activated!!!
>I found driver on ati site, but read somewhere that for Toshiba notebooks drivers are modified so that >graphic card won't overheat. Is that true? Or original drivers (of ati group) are as good as Toshiba ones?
As mentioned in this forum, the original ATI or nVidia drivers are designed not for the notebook usage!!! The GPU drivers are designed for the graphic cards which are used in the desktop PCs!!! Such graphic cards are equipped with an own, big cooling module in order to prevent the hardware from overheating!!! The notebook GPUs dont support such huge cooling modules and therefore the drivers must control the performance and the temperature growth.
regards

Satellite Pro A200: XP + Vista installed/dual boot possible?

Hi,
I am not sure if I am right here at XP OS but I post it as it is OS related.
My Satellite Pro A200 (PSAE7) runs smoothly with XP but I want to create a sandbox (partition) for/with Vista.
Basically I know that it is possible to run XP and Vista on one system. *But*, Satellite Pro A200 notebooks are shipped with a BIOS for XP and one for Vista and with information that you have to install the correct one. For me this means that you have to install BIOS for XP when running XP and BIOS for Vista when running Vista.
Question:
Is it possible to install Vista on a Satellite Pro A200 with XP as main OS and having so XP BIOS installed?
Boot loader would be Acronis OSS as this loader already manage my two XP partitions.
Many thanks for any information!
Best regards,
Andreas

Hi
In my opinion there are no serious reasons why you shouldnt be able to use Xp and Vista on your Satellite Pro A200.
Ok there are different BIOS for Vista 64bit, 32bit and Win XP but your Vista should run also using the BIOS for Win XP.
Ive got other Satellite notebook series and Im able to use XP and Vista at the same time. I mean Ive got a choice to boot either the XP or Vista ;) and Im still using the old BIOS version.
Ok some functions are not available like FN keys but this is not very important for me.
Well, to cut this story I think you can use Vista and XP without changing the BIOS ;)

How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?

Hi guys,
I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ?
I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ?
thanks.

Read this about creating a lion recovery on an external drive or USB stick.
http://support.apple.com/kb/HT4848
/Dennis

Re: Satellite Pro A200 - Won't boot with 4GB RAM

Hi,
I've installed 2 x 2GB, but it seems it doesn't work. The funny thing is that when running just one memory strip (so 2GB) it works, when running both it doesn't work and it freezes. These are the Samsung 2GB 2Rx8 PC2 - 6400s - 666 - 12 - E3
Ive' installed the latest BIOS update (64bit v2.60) for the Satellite Pro A200 and I am running Windows 7 64bit

Hi caribman
What Satellite Pro A200 you have exactly?
I ask this because some A200 models were equipped with Intel 943GML chipset and these models support 2GB only!!!

Product recovery problems on Satellite Pro A200

Hi
I have a Satellite Pro A200. It is running very slowly and sometimes it freezes up when I log on.
Also the homepage has been hijacked and I have tried several anti spyware programs and they have not worked.
I have the product recovery disc but the problem the DVD rom drive has stopped working.
The light is on but it will not open unless I use the manual release.
I have removed it and checked the connections but it seems o.k.
The DVD/CD rom has disappeared from the device manager and does not show up under hardware.
I have tried system restore but this also will not work.
Is there anyway you can use the product recovery software if you boot from a USB key?
I have tried restarting the computer and choosing boot from CD but it will not give me that option.
I have looked in the bios and the only boot options that it gives are harddrive, CD rom, land and FDD

> Is there anyway you can use the product recovery software if you boot from a USB key?
No, this Toshiba Recovery disk cannot be copied to USB flash memory stick and used for OS installation. Im afraid this would not work.
But if youve got an Microsoft Windows CD you should be able to create an bootable USB flash memory stick. In internet you will find many useful step by step instructions how to create such bootable USB stick.
But booting from USB flash memory stick should be definitely possible since the BIOS supports following bootable devices:
USB FDD, HDD, ODD, Network(LAN), USB Memory

XP via RIS installation on 32 Satellite Pro A200 laptops

Hi,
Can anyone help? I'm trying to install 32 laptops (Satellite Pro A200) via Windows 2003 Server Remote Installation Services. I've got past the problems with network cards and now have these working by adding the drivers into a $OEM$, $1, Drivers, Nic folder and thought that it might be simple to use the same solution to install the drivers for the SATA controller. How wrong could I be! I'm now pulling my hair out. The machines have the drivers installed in the same way ($OEM$ etc) in a directory marked sata. I have used the drivers from Intel's site - extracted to floppy disk and copied from there. Every time I try to re-image I get the same error "Windows did not detect any hard disk drives" and it's driving me crazy! I have edited risstnrd.sif, textsetup.oem etc etc to no avail.
I found a link on Toshiba's German site for downloading drivers in this situation but the link is pretty slow I've tried to download those drivers now from three separate locations (3 different ADSL accounts) and each one starts off at about 36k per sec then dwindles down to bytes per second and then fails. (It's only a 21Mb file!)
Has anyone managed to deploy these laptops via RIS? If so can you please let me know how you did it and what drivers you used?
Many thanks,

Hello Mark
In my opinion RIS installation is pretty complicated theme and I am really skeptic someone will be able to help you. If you have some time try to use advanced search and check the results for RIS as searched term.
Other way you can create your own recovery DVD and use it for OS installation. For recovery procedure you need about 20 minutes.

Satellite Pro A200 (PSAE4): DVD drive permanently blinking

Hello,
I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
Any help would be really appreciated.
Thanks !

Hi
According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
Am I right?
To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
What do you think?

Satellite Pro A200 - Hard Drive has lost half it's memory

I have a toshiba Satellite Pro A200 running Vista. Vista came preloaded and I don't have any discs for it. I have had it since new (Sept 2007). The hard drive is split into drives. Recently my C drive has competely filled up and I now have no space left (55gigs gone) I store no data in this drive. All my media (music, photos, other files) is in my E drive. I have to run C Cleaner each time I boot up in order to have enough space to operate the computer. I also have to delete all but the most recent restore point in order to function.
I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to 'new'? I have all my files backed up on an external hard drive so I don't mind starting from scratch. Bearing in mind I have no install discs as Vista came pre-loaded.
Can anyone help????? please!

If you don't have any disc and if you didn't get any disc with your notebook that means your notebook was delivered with HDD recovery image and this image is saved on second HDD partition in folder called HDDRecovery.
Recovery disc can be created using preinstalled Toshiba recovery disc creator. I don't know if you still have all this.
The whole story with HDD is somehow strange to me. If your notebook has two partitions and partition C is full I am asking myself what is with second partition. It must be pretty empty.
What is capacity of second HDD partition?
What is free space on this second partition?
You wrote about E drive. What is E drive?
You must understand that nobody of us know what are you doing exactly, what programs are installed on your notebook. You wrote about no saving data on partition C. Maybe you are wrong about it. Maybe you download many torrents and they are saved somewhere on HDD. who knows?
Do you have some friends with good PC knowledge? Try to find someone who can take a look onto preinstalled system and check what is going wrong there.

Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

Similar Messages

Maybe you are looking for