Satellite Pro A200 - New ODD ignors the Recovery disk

Hi,
_Satellite Pro A200 PSAE4E Windows XP_
I started getting bad “Not-Ready” system errors on the original ODD. Toshiba Disc Creator report: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.
I replaced the ODD with a new one from Amazon. Toshiba Disc Creator report: TSSTcorp CDDVDW TS-L632H SC04. The new ODD is listed as suitable in the User Manual - it’s the same model as the original. The new ODD works perfectly for normal use within XP. But when I attempt to use the Recovery Disk, it is ignored and XP always boots from the HDD. And when I press F12 during boot, the new ODD is not listed.
Can you assist me to get the ODD recognised at boot time please?
Thanks.
Mike

Thank you for your replies.
To be exact, I see the following at boot time:
F12 shows only HD and LAN boot options.
F2 shows the usual 4 options, HD, ODD, Floppy and LAN.
But since I have no floppy either, I suspect the F12 list is the correct one - and it fails to show an ODD option.
@C3PO
Yes, Ive tried all those ideas, and I have the latest A200 BIOS.
@Akuma
So it is insufficient to have the correct model number? It should be explained somewhere that even if you have the correct ODD model, it may still not work.
Please can you give me a link to Toshiba, so that I can obtain a suitable ODD. I'm in England.
Thanks for your swift assistance.
Mike

Similar Messages

Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

Satellite A60-218 - Where to download the recovery disk?

I have a Toshiba Satellite S60. It is a job computer and it is actually not mine but as I work with and I want it to be faster.
Someone on the past formated it with a F@kE Windows XP installation disk and all the drivers got lost. Not just the wireless card but also sound and graphics card.
I found after a lot of searching the sound driver. The main problem is that it is not genuine cpoy of windows and it is very slow because of trojan, etc.
I beleive the fastest way to fix it is to recover the factory settings (all CDs are lost). Only I could not find in the website the S60 satellite. Is there a recovery iso image to download?
Can anyone help me? I am really desperate...

Hi
Im not sure if you would be able to order the Recovery disk for this Sat A60 notebook.
Its a older series and I believe that the Recovery disk are not more available for this model. But of course you should get in contact with the local ASP to get more details
Maybe they have some disk on stock.
However, the WIN XP drivers can be found on the Toshiba European driver page.
Because the A60 is an older notebook, the drivers have been moved to the Archive area!
Check archive and you would find all XP drivers.
PS: You should use a original Win XP disk ;) the copy are not legal and you could not run any necessary updates which are really important to get rid of the Win XP bugs.
Cheers

Satellite L500-19X - Can't use the recovery disk

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
I thank anyone in advance.
Happy new year :)

Hi
Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
Bye

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

Satellite A300 - I can't find the recovery disk creator

Hi everybody!
Need some help with my Satellite A300. I lost the optical recovery disc I burned when the laptop was new. Now when I'm trying to burn a new recovery disc I can't find the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the recovery files left - a folder named HDDRecovery with size 4.5 GB. The problem is to find out how to burn the disc.
Can anyone help?
//iMate, Sweden

Hello
F8 will works just if you didnt change anything with first partition and if you still use factory settings.
"Toshiba Recovery Disc Creator" cannot be gone for no reason. Either you have removed it from the system or you have installed own Vista OS.
I don't want to speculate why you cannot use F8 anymore but fact is that for new Vista installation you need recovery DVD.
You can order one under https://backupmedia.toshiba.eu/landing.aspx

Re: Satellite Pro A200 - Screen goes black after BIOS screen

Hi,
I'm new to the forum and have quite a big problem. So any help is welcome and appreciated.
My Satellite Pro A200 goes black after the BIOS screen and a black screen with a blinking cursor. Also just before the screen goes black a bleep can be heard which shows windows is booting.
I can access the toshiba set-up screen but not the safety mode set-up.
Kind Regards

Hello
You wrote that you can access the BIOS but have you checked if the HDD is recognized properly? Maybe the computer cannot boot because HDD isnt recognized so you should check this.
If the HDD is recognized I would try a recovery installation from Toshiba recovery disk. It seems that Windows isnt able to start and if you reinstall the whole system it should help to get rid of this. Just go in boot menu and select CD/DVD drive as boot device.
Check this!!!

What internal HD can I use on my Satellite Pro A200 PSAE1E-01700EN5

I need to replace my laptop's broken internal HD. I was wondering, what internal HD can I get for Satellite Pro A200 PSAE1E-01700EN5?
The only one available for me to order for cheap is 250Gb large, but will my laptop support it? I had 80Gb previously.

I don't understand why you think your notebook is old generation. Between your A200 and my A300 is not much difference.
Both use the same HDD. My Satellite A300 has maybe other hardware platform and thats all.
I am 100% sure you can use 250 GB HDD in your Satellite A200.

Satellite PRO A200-1S1 with Windows 7 x32. Touchpad doesn't work

Hi everybody
I Installed Windows 7 on my Satellite Pro A200-1S1, retrieved all the drivers on Toshiba site, everything works fine (less than the web camera that didn't work even with previous s.o. XP or Vista...). But my Touchpad doesn't work at all.... No Fn+F9, no driver, nothing works. And in my control panel-device manager seems to be everything ok.
Any suggestion?

Hi
Never had any problems with the touchpad using Win 7 32bit.
I recommend installing VAP (value added package) and Flash Card Support Utility to get the FN button functionality. Then you could try FN + F9
Both tools can be downloaded from Toshiba European driver page there you should choose Sat L500 series because I didnt find mentioned Win 7 software for A200 series.
Check also the touchpad drivers which I found in L500 download area (Alps a Synaptics)
<img src='http://img510.imageshack.us/img510/5830/capturelxz.jpg' border='0' width='550px'/>

Has Satellite Pro A200(GE)-1F9 DDR2 or DDR3?

Hi
I have phoned every retailer and manufacture contact there is, but no body seems to know;
What type is the GPU in the A200-1F9, is it GDDR2 or GDDR3?
I believe the hardware configuration is the same al over Europe, isnt it? With C2D T7300, 2 Gb Ram, 250 Gb HD AND ATI Radeon HD 2600 w/ 256 mb of VRAM.
But the thing that no Forum and "professional" personnel is capable of answering is if it is DDR2 or DDR3.
So please, make my day and help me. Cause Im getting quite aggravated?.
And do send a copy to ATI, Toshiba Sweden, and Every retailer that have this model.
Cincearly
Johan Oeberg

Hi
The Satellite Pro A200-1F9 belongs to the PSAE7E series and its a part number: PSAE7E-007004N5. Am I right???
The notebook was delivered with the ATI Mobility Radeon X2600 graphic card (sometimes called Radeon HD 2600).
The code name is M76.
So I searched for +ATI Radeon X2600 code name M76+ and found these GPU specifications:
Video Memory -> External with TurboCache
_Video Memory Capacity_
Local cache 256MB/512MB
_HyperMemory Capacity_
0MB@Sys RAM 512MB
256MB@Sys RAM 1024MB
Please note that the *total* Video Memory is *sum* of _local cache_ and _Hyper Memory_ !!!
_Bus Width_
128bit@256MB(GDDR2) Local Cache
128bit@512MB(GDDR2) Local Cache
128bit@256MB(GDDR3) Local Cache
256bit@256MB(GDDR3) Local Cache
http://ati.amd.com/products/MobilityRadeonhd2600/index.html
It looks like thsi card supports both; GDDR2 & GDDR3
This is everything what I found.

Satellite Pro P300 - How to obtain the factory image without media?

Hello
I have been given a Satellite Pro P300 and it has the recovery disc for win xp, I would like to go back to the pre installed Vista intallation if possible.
The recover partition on the hard drive isnt available so i assume it cant be recovered. Is it possible to purchase a factory image?

Liam is right Win 7 is better than Vista OS.
So if you have a possibility to install Win 7 I recommend doing this instead of Vista.
However, the Toshiba recovery disk contain just Vista OS.

Satellite P500 - Restart loop after using Toshiba recovery disk

Hi,
I have got a problem recovering SATELLITE P500. I had made the recovery disks. It boots ok from the recovery disk and formats the hard drive and copies the disks to the hard drive. It then starts windows setup and reboots.
Then it goes to a loop
1) Start up and says "Setup is preparing your computer for first use"
2) Toshiba banner saying please wait... Finnishing installation may take several minutes. Pleae do not interupt or shutdown the computer!
3) Windows logo
4) Shutting down...
5) restarts and goes to 1)
It would be great if some one could help me with this.
Many thanks,
Softari

Hello
I have noticed the same on my Satellite P500 but I must say its not an issue, its absolutely normal. The notebook will restart several times (10 times or more) to finish the installation.
You must know that a lot of drivers/tools will be installed and certain restart must be done to configure everything properly.
So dont interrupt the recovery installation, just wait a little bit longer and drink a coffee. Everything happens automatically and your notebook will be reinstalled with factory settings. :)

Product recovery problems on Satellite Pro A200

Hi
I have a Satellite Pro A200. It is running very slowly and sometimes it freezes up when I log on.
Also the homepage has been hijacked and I have tried several anti spyware programs and they have not worked.
I have the product recovery disc but the problem the DVD rom drive has stopped working.
The light is on but it will not open unless I use the manual release.
I have removed it and checked the connections but it seems o.k.
The DVD/CD rom has disappeared from the device manager and does not show up under hardware.
I have tried system restore but this also will not work.
Is there anyway you can use the product recovery software if you boot from a USB key?
I have tried restarting the computer and choosing boot from CD but it will not give me that option.
I have looked in the bios and the only boot options that it gives are harddrive, CD rom, land and FDD

> Is there anyway you can use the product recovery software if you boot from a USB key?
No, this Toshiba Recovery disk cannot be copied to USB flash memory stick and used for OS installation. Im afraid this would not work.
But if youve got an Microsoft Windows CD you should be able to create an bootable USB flash memory stick. In internet you will find many useful step by step instructions how to create such bootable USB stick.
But booting from USB flash memory stick should be definitely possible since the BIOS supports following bootable devices:
USB FDD, HDD, ODD, Network(LAN), USB Memory

Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
The Vista licence specifically also licences XP.
Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
I would also like, as a third boot, Red Hat Linux 9.
Any comments ?

Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
Best regards

Cannot install the XP Modem driver for Satellite Pro A200

I'm a local network admin for Newbold College. We have new A200 laptops and we need XP Pro on some of them. I have tried to install the modem driver as one of the last drivers downloaded from the european support site. I also tried to Canadian site as well.
The driver install program doesn't seem to do anything. I tried to manually install the driver from one of Windows modem Agse/Toshiba software modem, but I have com port issues and I can't quire the modem.
Can anyone help me please!!!!!!!

Hi
What to say; I have checked the Toshiba Europe driver page and found all necessary and important XP drivers for the Satellite Pro A200.
Please note that the Toshiba European driver page provides XP drivers for 3 different Sat Pro A200 series!!! There is PSAE1, PSAE4 and PSAE7 series.
Please choose the right one!!!!
Furthermore you will find an installation instruction txt file on the Tosh page.
In this file you will find a right and important installation driver order!!! Please follow these steps!!!
I dont know exactly why you get the modem com port problems but I assume that a new XP and driver installation should solve this strange issue.
Good luck

Satellite Pro A200 - New ODD ignors the Recovery disk

Similar Messages

Maybe you are looking for