Satellite Pro A200: Recovery using a network ghost boot disk

Hi all,
Need to ghost several sat pro a200 machines using a network ghost boot disk. when i use the ghost disk provided by ghost boot wizard and booting into PC dos i get the message "No Fast Ethernet PCI Adapter Found!" Serious Internal Error! (hardware works OK in XP/Vista)
i have tried booting from CD, Mem Stick and USB floppy with drivers from toshiba and realtek without any success, searches on google seem to point toward there needing to be a driver to interface with the cardbus / PCMCIA adapter - if this IS the case can anyone shed any light on the whereabouts of such a driver and how i could go about doing this?
Many thanks,
Gav Shakespeare.

Sorry folks answered my own question - the network card is reported as being an RTL8134 in windows XP but is in fact an RTL8100E/RTL8101E so i was using the wrong NDIS2 Driver!. doh!
emergency over.

Similar Messages

Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
The Vista licence specifically also licences XP.
Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
I would also like, as a third boot, Red Hat Linux 9.
Any comments ?

Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
Best regards

Product recovery problems on Satellite Pro A200

Hi
I have a Satellite Pro A200. It is running very slowly and sometimes it freezes up when I log on.
Also the homepage has been hijacked and I have tried several anti spyware programs and they have not worked.
I have the product recovery disc but the problem the DVD rom drive has stopped working.
The light is on but it will not open unless I use the manual release.
I have removed it and checked the connections but it seems o.k.
The DVD/CD rom has disappeared from the device manager and does not show up under hardware.
I have tried system restore but this also will not work.
Is there anyway you can use the product recovery software if you boot from a USB key?
I have tried restarting the computer and choosing boot from CD but it will not give me that option.
I have looked in the bios and the only boot options that it gives are harddrive, CD rom, land and FDD

> Is there anyway you can use the product recovery software if you boot from a USB key?
No, this Toshiba Recovery disk cannot be copied to USB flash memory stick and used for OS installation. Im afraid this would not work.
But if youve got an Microsoft Windows CD you should be able to create an bootable USB flash memory stick. In internet you will find many useful step by step instructions how to create such bootable USB stick.
But booting from USB flash memory stick should be definitely possible since the BIOS supports following bootable devices:
USB FDD, HDD, ODD, Network(LAN), USB Memory

Satellite Pro A200 with Vista doesn't see other XP notebook in the network

I have Satellite Pro A200 Toshiba and I have some problems with the network.
The Inernet is upp and going but I cant find the other computers in my network.
Im having 3 other computer in a network. The A200 is having Vista and the other one is having just XP-pro and XP-home.
The network by the tree standalone is working fine but the laptop is not present in the network.
I've have checked the workgroup so it the same.
Is there anyhone thats having any idea how or whats the problem?

Hi again. Ive discovered how to solve the problem! Its the Norton Internet security thats causes the problem.
Just open the program, right click at the icon down at right, click at "Norton Protection Center"
Click on the "Norton Internet Cecurity", Wirewall settings, Commin Settings, Common Rules, Configurate,
Scroll down to "Standard-Block filesharing in Windows" Mark and "Modify", Mark the option "Allow" Save and go!
If You have understand what Ive written it should be working, the thing is that I have Swedish versions of all the software
so it might be a littel hard to understand the translation that Ive done. Try to use it and look for the most likness of my poor English.
regards
/bejjo
Message was edited by: ADMIN

What internal HD can I use on my Satellite Pro A200 PSAE1E-01700EN5

I need to replace my laptop's broken internal HD. I was wondering, what internal HD can I get for Satellite Pro A200 PSAE1E-01700EN5?
The only one available for me to order for cheap is 250Gb large, but will my laptop support it? I had 80Gb previously.

I don't understand why you think your notebook is old generation. Between your A200 and my A300 is not much difference.
Both use the same HDD. My Satellite A300 has maybe other hardware platform and thats all.
I am 100% sure you can use 250 GB HDD in your Satellite A200.

Satellite Pro A200-1NB - Can I use Windows 7 64bit?

This is my laptop: Satellite Pro A200-1NB Part Number : PSAE7E-00V00CG3
http://eu.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=EU&ACTION=PROCESS_DETECTION& TYPE=FORWARD&SOURCE=SMP&COUNTRY=&QSA=TRUE&MODEL=Sa tellite+Pro+A200&SERIAL=97348001K&service=EU&LOCAL E=&OSBUILD=7600&SUB_TYPE=SMP&OSBITSIZE=32&PANUMBER =PSAE7E-00V00CG3&ERROR=0
Can I use it on Windows 7 x64? I see that there are not all drivers present in 64bit version so I want to know if everything will work property with 64 bit Windows?
Thanks for reply
Mario

Hi buddy,
Youre right. According the Toshiba European driver download for Windows 7 64bit are not all drivers available. I have checked the downloads for Vista 64bit and therefore all drivers you need are available.
Vista and Windows 7 drivers are similar so you can try to use the Vista 64bit drivers. The most Vista drivers also work on Windows 7.
Furthermore if something will not work you can use other drivers from Satellite A300 for example. This notebook supports Windows 7 64bit and the drivers should be similar I think.
Good luck! :)

XP via RIS installation on 32 Satellite Pro A200 laptops

Hi,
Can anyone help? I'm trying to install 32 laptops (Satellite Pro A200) via Windows 2003 Server Remote Installation Services. I've got past the problems with network cards and now have these working by adding the drivers into a $OEM$, $1, Drivers, Nic folder and thought that it might be simple to use the same solution to install the drivers for the SATA controller. How wrong could I be! I'm now pulling my hair out. The machines have the drivers installed in the same way ($OEM$ etc) in a directory marked sata. I have used the drivers from Intel's site - extracted to floppy disk and copied from there. Every time I try to re-image I get the same error "Windows did not detect any hard disk drives" and it's driving me crazy! I have edited risstnrd.sif, textsetup.oem etc etc to no avail.
I found a link on Toshiba's German site for downloading drivers in this situation but the link is pretty slow I've tried to download those drivers now from three separate locations (3 different ADSL accounts) and each one starts off at about 36k per sec then dwindles down to bytes per second and then fails. (It's only a 21Mb file!)
Has anyone managed to deploy these laptops via RIS? If so can you please let me know how you did it and what drivers you used?
Many thanks,

Hello Mark
In my opinion RIS installation is pretty complicated theme and I am really skeptic someone will be able to help you. If you have some time try to use advanced search and check the results for RIS as searched term.
Other way you can create your own recovery DVD and use it for OS installation. For recovery procedure you need about 20 minutes.

Cannot ping localhost - error code 2 on Satellite Pro A200

Dear IT gurus,
I have a Satellite Pro A200 laptop.
When i ping the localhost, it says unable to contact ip driver, error code 2.
I tried to repair the winsock using microsoft's articles with no luck.
Now I want to reapair the operating system using the recovery DVD.
Does the recovery DVD have a repair option?
If not does any one know how to fix this problem?
Help please!!!!!
This is the result i got using the pc diagnostic tool.
Date 2008/08/30 01:47:12
[PC Information]
Model Name Satellite Pro A200
Part Number PSAF4U-00D004
Serial Number Y7312740Q
OS Version Microsoft Windows XP Professional 5.1.2600 Service Pack 2
BIOS Version 1.70
CPU Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
Physical Memory 1024MB RAM
Hard Disk Capacity 120,031,511,040 [Byte] 111.788 [GB]
Hard Disk Free Space Capacity 92,245,069,824 [Byte] 85.910 [GB]
Video Mobile Intel(R) 965 Express Chipset Family version=6.14.10.4833
Screen Resolution 1280 x 768 Pixels
Color Quality True Color (32 Bit)
Sound Realtek High Definition Audio version=5.10.0.5440
Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller version=10.14.6.3 MAC Address=
Intel(R) PRO/Wireless 3945ABG Network Connection version=11.1.0.100 MAC Address=
Modem TOSHIBA Software Modem version=2.1.77.0
IDE Device 1 TSSTcorp CDDVDW TS-L632H FW version=TO01
IDE Device 2 None
IDE Device 3 None
IDE Device 4 None
IDE Device 5 Hitachi HTS542512K9SA00
IDE Device 6 None
Internet Explorer 7.0.5730.11

Hi
>I tried to repair the Winsock using Microsofts articles with no luck
I assume you are meaning this MS knowledge base article:
[How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista|http://support.microsoft.com/kb/811259]
Well, I searched a little bit around and found out that the solution described on 811259 article doesnt help in all cases
So searched on 3rd party website and someone has suggested to try this advice.
Its also from Microsoft:
*[How to reset Internet Protocol (TCP/IP) in Windows XP|http://support.microsoft.com/kb/299357 ]*
So check it out maybe it helps
If not, then you might be forced to reinstall your OS because the repair option is not included in the Toshiba recovery CD ;(
Regards

Need help restoring Satellite Pro A200-1OJ to factory settings

HI, my mum is selling her laptop and asked me to wipe it clean for her so im trying to restore to factory settings with a fresh OS install etc. Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
Satellite Pro A200-1OJ
Part Number : PSAE1E-01H008EN
Key Features
- Intel Celeron M processor 520 (1.60 GHz / 533 MHz Front Side Bus / 1MB 2nd level cache)
- Genuine Windows XP Professional
- 9 cell battery with over 5 hours battery life
- DVD Super Multi (Double Layer) drive
- 15.4" TruBrite WXGA TFT display 1,280 x 800

> Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
You can use either the HDD recover or the Recovery disk.
If HDD recover does not work and if you dont have the disk then you could order this here:
http://backupmedia.toshiba.eu/landing.aspx

Satellite Pro A200: Windows cannot find WLan

Something's wrong with my laptop, I have Toshiba Satellite Pro A200 with XP Pro SP3...
When I try to search for wireless networks using Microsofts program, it can't find anything, but TOSHIBA's ConfigFree can.
You probably say, that well use Toshiba's software then - that's not possible, cause ConfigFree supports only WEP keys, but most of Wireless keys used here are WEP-TSK or something - not supported by ConfigFree.
How can I make my Microsoft Windows to detect Wireless routers?

I knew it, but I just had to make sure.
I shall never install SP3 again.
To all people, DO NOT INSTALL SP3!!
Unless you don't have it allready preinstalled, in that case, it won't do any harm.
Case closed.

Satellite Pro A200 (PSAE4): DVD drive permanently blinking

Hello,
I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
Any help would be really appreciated.
Thanks !

Hi
According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
Am I right?
To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
What do you think?

Satellite Pro A200-1F9 - FN buttons dont work

Hi
My laptop is Satellite Pro A200-1F9 (PSAE7E-007003EN) with Windows Vista Business x64 recently I have swapped my WLAN Wi-Fi card , from standard Intel pro ABG to Realtek 8191SE "N".
Card is recognized and visible in device manager, all drivers are installed, but no network available. System doesnt see any network. In addition I can't find and install proper TVAP which will allow me use FN+F8 combination.
Can somebody help me please solve that problem?

This notebook model is not supported for Win7 64bit. Try to use Toshiba value added package for Satellite Pro P300.
You can find it here .
Post some feedback.

Satellite Pro A200 - Hard Drive has lost half it's memory

I have a toshiba Satellite Pro A200 running Vista. Vista came preloaded and I don't have any discs for it. I have had it since new (Sept 2007). The hard drive is split into drives. Recently my C drive has competely filled up and I now have no space left (55gigs gone) I store no data in this drive. All my media (music, photos, other files) is in my E drive. I have to run C Cleaner each time I boot up in order to have enough space to operate the computer. I also have to delete all but the most recent restore point in order to function.
I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to 'new'? I have all my files backed up on an external hard drive so I don't mind starting from scratch. Bearing in mind I have no install discs as Vista came pre-loaded.
Can anyone help????? please!

If you don't have any disc and if you didn't get any disc with your notebook that means your notebook was delivered with HDD recovery image and this image is saved on second HDD partition in folder called HDDRecovery.
Recovery disc can be created using preinstalled Toshiba recovery disc creator. I don't know if you still have all this.
The whole story with HDD is somehow strange to me. If your notebook has two partitions and partition C is full I am asking myself what is with second partition. It must be pretty empty.
What is capacity of second HDD partition?
What is free space on this second partition?
You wrote about E drive. What is E drive?
You must understand that nobody of us know what are you doing exactly, what programs are installed on your notebook. You wrote about no saving data on partition C. Maybe you are wrong about it. Maybe you download many torrents and they are saved somewhere on HDD. who knows?
Do you have some friends with good PC knowledge? Try to find someone who can take a look onto preinstalled system and check what is going wrong there.

Satellite Pro A200 PSAFCA: Need Lan and display driver for XP

Hey
please help me!
I have just installed XP on my new satalite pro, but i have had trouble with the drivers.
At the moment I have installed most but from this site i can't seem to find a driver that will help my network card, nor my video NIVIDIA drive...
any suggestions would be very valuable

The Satellite Pro A200 PSAFCA is not known to me. I know only the Satellite Pro A200 PSAE1, PSAE4 and PSAE7. So could you please confirm your Pro A200 series?!
If you cannot find the single XP drivers on the Toshiba page I would recommend checking the LAN and the graphic chip which is installed on the motherboard and use the XP drivers from the chip manufacture.
If you need an graphic driver I would recommend using the drivers from the www.omegadrivers.net or www.laptopvideo2go.com site
Regards

Satellite Pro A200: Recovery using a network ghost boot disk

Similar Messages

Maybe you are looking for