Satellite Pro A200: Wake-up over keyboard using an USB keyboard

is there a way to turn on the laptop while keeping its lid closed using a USB keyboard. if yes what is the key combination

Hmmm I dont know if you can wake up the notebook if the lid is closed but as far as I know it should be possible to wake the notebook using a keyboard itself.
The Toshiba HWSetup was preinstalled on the Vista OS. In this tool you should find an option called: wake-up on keyboard.
This can be found in the keyboard tab and you need to set it to Enable.
Furthermore please enable the Legacy USB support. This option can be found also in the HWSetup under USB tab.
Best regards

Similar Messages

What internal HD can I use on my Satellite Pro A200 PSAE1E-01700EN5

I need to replace my laptop's broken internal HD. I was wondering, what internal HD can I get for Satellite Pro A200 PSAE1E-01700EN5?
The only one available for me to order for cheap is 250Gb large, but will my laptop support it? I had 80Gb previously.

I don't understand why you think your notebook is old generation. Between your A200 and my A300 is not much difference.
Both use the same HDD. My Satellite A300 has maybe other hardware platform and thats all.
I am 100% sure you can use 250 GB HDD in your Satellite A200.

Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

Satellite Pro A200: How to create Dual boot; Vista & XP using Recovery CD

I have just purchased a Satellite Pro A200 lap-top, which was supplied with Product Recovery disks for both Vista and XP.
The Vista licence specifically also licences XP.
Can I set up a dual boot so that I can boot to either Vista or XP ? If so, how?
I would also like, as a third boot, Red Hat Linux 9.
Any comments ?

Hmmm. Usually its possible to use two or more operating systems on the computer but as far as I know the Toshiba Vista Recovery CD formats the whole HDD during the Vista installation and this will lead to losing of the installed OS's.
Im not 100% sure about the XP Recovery CD The newest CD called RECO doesnt include expert mode which allows choosing between different partitions.
So I presume every usage of the Recovery CD will format the HDD and will erase the installed data. But of course you could try to install both OS and to check if the XP recovery CD allows choosing second portion for the OS installation.
If it will not function it seems that you will need either an original Microsoft XP CD or the original Vista CD to use both OS.
Best regards

Satellite Pro A200-1NB - Can I use Windows 7 64bit?

This is my laptop: Satellite Pro A200-1NB Part Number : PSAE7E-00V00CG3
http://eu.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=EU&ACTION=PROCESS_DETECTION& TYPE=FORWARD&SOURCE=SMP&COUNTRY=&QSA=TRUE&MODEL=Sa tellite+Pro+A200&SERIAL=97348001K&service=EU&LOCAL E=&OSBUILD=7600&SUB_TYPE=SMP&OSBITSIZE=32&PANUMBER =PSAE7E-00V00CG3&ERROR=0
Can I use it on Windows 7 x64? I see that there are not all drivers present in 64bit version so I want to know if everything will work property with 64 bit Windows?
Thanks for reply
Mario

Hi buddy,
Youre right. According the Toshiba European driver download for Windows 7 64bit are not all drivers available. I have checked the downloads for Vista 64bit and therefore all drivers you need are available.
Vista and Windows 7 drivers are similar so you can try to use the Vista 64bit drivers. The most Vista drivers also work on Windows 7.
Furthermore if something will not work you can use other drivers from Satellite A300 for example. This notebook supports Windows 7 64bit and the drivers should be similar I think.
Good luck! :)

Need help restoring Satellite Pro A200-1OJ to factory settings

HI, my mum is selling her laptop and asked me to wipe it clean for her so im trying to restore to factory settings with a fresh OS install etc. Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
Satellite Pro A200-1OJ
Part Number : PSAE1E-01H008EN
Key Features
- Intel Celeron M processor 520 (1.60 GHz / 533 MHz Front Side Bus / 1MB 2nd level cache)
- Genuine Windows XP Professional
- 9 cell battery with over 5 hours battery life
- DVD Super Multi (Double Layer) drive
- 15.4" TruBrite WXGA TFT display 1,280 x 800

> Dont have a recovery disc with it and i've tried going through the advanced boot menu holding F8 when switching it on. Nothing works heres the details any help would be appreciated.
You can use either the HDD recover or the Recovery disk.
If HDD recover does not work and if you dont have the disk then you could order this here:
http://backupmedia.toshiba.eu/landing.aspx

"Common module" missing for XP on Satellite Pro A200

Hello everyone,
I received my Satellite Pro A200 (PSAE7) laptop with a Vista OS.
I have made a fresh & clean XP installation on it using the Toshiba's installation instructions document.
Everything is working fine except my Fn+F6 Fn+F7 Fn+F8 hotkeys for Wireless and screen brightness.
I have made a few search over the internet and I found that page :
- http://support.toshiba-tro.de/kb0/TSB7401VB0003R01.htm
Looks like that I need to setup "common module" installer in order to make work those hotkeys.
But the problem is that the "common module" is not available on the driver page for XP ....
If I change the OS type to Vista there is "Value Added Package" available but it's not compatible on XP ...
I tried to download and setup a "common module" for Sat Pro A120 model but i got an "TVALZ" error during the installation ....
Did Toshiba support forget to put online a "common module" installer for XP for Sat Pro A200 ??
How can I make work my Fn+F6 Fn+F7 Fn+F8 hotkeys ?
Any help will be really appreciated !
Thanks,
Can

Hello darkmatterman,
First of all thanks for you reply and for your tips about the Bios version (Vista vs XP).
The first day I received my laptop on Vista OS, I already made a Bios update "the Vista compatible one". So my Bios is v1.70 actually.
I will try monday morning to update the latest XP compatible Bios version which is v5.20...
Do you know if it's possible to apply the latest XP bios upgrade on a bios which was already been upgraded with a Vista compatible version ?
And if the XP comptabile Bios upgrade works, do you think that I will need to setup my fresh XP again (with all Toshiba drivers & utils setup order...) ?
Regards,
Can

Satellite Pro A200 - Is 26 minutes of battery life normal?

Hi All,
My Satellite Pro A200 laptop is just over 1.5 years old (or young :P) and I have a huge problem with the battery - it only lasts for a total of _26 minutes_ under "high performace" mode in Vista - other power modes increase the time by only 5-7 minutes.
I have tweated the system setup to:
- run as few programs at startup;
- to use as little memory in relation to graphics (as in diabled vista themes, and "fancy" operations such as show contents of window whilst dragging).
- remain on the lowest brightness level.
The programs that do run on startup are my anti virus (F-Secure), and ATI catalyst control.
I have also cleaned the registry of any conflicts and regularly virus scan.
I have used Ubuntu on this laptop as well and the battery life is not that much better, which brings me to the conclusion that the battery is nearing its end.
I was wondering if this battery life time (26 minutes max on high performace) is normal for a laptop after only 1.5 years?* (I don't remember how long it lasted when I first bought it).
Also, I have a laptop from other manufacturer of 2 years and the charge of its battery lasts a minimum of 4 hours (on Windows XP).
Both notebooks batteries are 6 cell.
Any suggestions of how to improve my battery life?
Thanks in advance.

>Satellite Pro A200 laptop is just over 1.5 years old and I have a huge problem with the battery - it only lasts for a total of 26 minutes under "high performace" mode in Vista
The battery working time depends on different factors:
If different hardware parts like CPU, GPU, HDD, ODD, display are running with highest performance then your battery working time will decrease dramatically
Additionally if you would lose an stronger battery (9 cell or 12 cell) then you should be abele run the notebook much longer using battery power.
Furthermore the battery loses the own performance systematically and after a long time of usage you will have to replace the battery.
However, if you want you could check the Vista Power Options in order to increase the battery working time:
Here is a nice article:
How to handle the power management features of Windows Vista
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
But in worst case you will need a new, stronger battery

Satellite Pro A200: XP + Vista installed/dual boot possible?

Hi,
I am not sure if I am right here at XP OS but I post it as it is OS related.
My Satellite Pro A200 (PSAE7) runs smoothly with XP but I want to create a sandbox (partition) for/with Vista.
Basically I know that it is possible to run XP and Vista on one system. *But*, Satellite Pro A200 notebooks are shipped with a BIOS for XP and one for Vista and with information that you have to install the correct one. For me this means that you have to install BIOS for XP when running XP and BIOS for Vista when running Vista.
Question:
Is it possible to install Vista on a Satellite Pro A200 with XP as main OS and having so XP BIOS installed?
Boot loader would be Acronis OSS as this loader already manage my two XP partitions.
Many thanks for any information!
Best regards,
Andreas

Hi
In my opinion there are no serious reasons why you shouldnt be able to use Xp and Vista on your Satellite Pro A200.
Ok there are different BIOS for Vista 64bit, 32bit and Win XP but your Vista should run also using the BIOS for Win XP.
Ive got other Satellite notebook series and Im able to use XP and Vista at the same time. I mean Ive got a choice to boot either the XP or Vista ;) and Im still using the old BIOS version.
Ok some functions are not available like FN keys but this is not very important for me.
Well, to cut this story I think you can use Vista and XP without changing the BIOS ;)

Memory upgrade on Satellite Pro A200

Have two Satellite Pro A200 #PSAE1E-00T002EN laptops and wanted to know if I can upgrade the 2 x 1GB memory to 2 x 2GB?

As I understand you request, you want to upgrade the notebooks memory to 4GB.
Well, I think its not possible.
The Satellite Pro A200 supports max 2GB RAM (2 x 1GB) so you will be not able to use 2 x 2GB modules.
Best regards dude

Satellite Pro A200-PSAE7: Blue Screen error - ati2dvag infitive loop

I've got Satellite Pro A200-PSAE7 with ATI HD2600 Mobility Radeon. I've downgraded to XP SP2. I get blue screen saying that ati2dvag went infitive loop quite constantly. Any solution to this?
Offtopic: Why standart display drivers from ati.com does not work? (while on my friends laptop with also hd2600 mobilty radeon works fine).

Hi
> I've got Satellite Pro A200-PSAE7 with ATI HD2600 Mobility Radeon. I've downgraded to XP SP2. I get blue screen saying that ati2dvag went infitive loop quite constantly. Any solution to this?
Usually the BSOD appears due to the serious software issue or hardware malfunction.
In my opinion its a software (driver) issue.
I presume the BSOD appears why playing some games in most cases the graphic driver must be updated.
If the XP driver from the Toshiba page will not help you could try the graphic drivers from the www.omegadrivers.net site. The 3rd party drivers should run on your notebook. But note; 3rd party drivers can be used only at your own risk!
> Why standard display drivers from ati.com do not work? (While on my friends laptop with also hd2600 mobility radeon works fine).
The original ATI drivers cannot be installed on a easy way because such drivers dont support an overheating protection. The Toshiba GPU drivers are a little bit modified and support an overheating protection. Such protection is necessary and important because the notebook graphic cards are not equipped with huge cooling module like the GPUs on for the desktop PCs.
The temperature increases on the notebooks much faster and therefore the graphic driver have to control the GPU performance to decrease the internal temperature.
Therefore its always advisable and recommended to use the Toshiba drivers ;)

XP via RIS installation on 32 Satellite Pro A200 laptops

Hi,
Can anyone help? I'm trying to install 32 laptops (Satellite Pro A200) via Windows 2003 Server Remote Installation Services. I've got past the problems with network cards and now have these working by adding the drivers into a $OEM$, $1, Drivers, Nic folder and thought that it might be simple to use the same solution to install the drivers for the SATA controller. How wrong could I be! I'm now pulling my hair out. The machines have the drivers installed in the same way ($OEM$ etc) in a directory marked sata. I have used the drivers from Intel's site - extracted to floppy disk and copied from there. Every time I try to re-image I get the same error "Windows did not detect any hard disk drives" and it's driving me crazy! I have edited risstnrd.sif, textsetup.oem etc etc to no avail.
I found a link on Toshiba's German site for downloading drivers in this situation but the link is pretty slow I've tried to download those drivers now from three separate locations (3 different ADSL accounts) and each one starts off at about 36k per sec then dwindles down to bytes per second and then fails. (It's only a 21Mb file!)
Has anyone managed to deploy these laptops via RIS? If so can you please let me know how you did it and what drivers you used?
Many thanks,

Hello Mark
In my opinion RIS installation is pretty complicated theme and I am really skeptic someone will be able to help you. If you have some time try to use advanced search and check the results for RIS as searched term.
Other way you can create your own recovery DVD and use it for OS installation. For recovery procedure you need about 20 minutes.

Satellite Pro A200: Windows cannot find WLan

Something's wrong with my laptop, I have Toshiba Satellite Pro A200 with XP Pro SP3...
When I try to search for wireless networks using Microsofts program, it can't find anything, but TOSHIBA's ConfigFree can.
You probably say, that well use Toshiba's software then - that's not possible, cause ConfigFree supports only WEP keys, but most of Wireless keys used here are WEP-TSK or something - not supported by ConfigFree.
How can I make my Microsoft Windows to detect Wireless routers?

I knew it, but I just had to make sure.
I shall never install SP3 again.
To all people, DO NOT INSTALL SP3!!
Unless you don't have it allready preinstalled, in that case, it won't do any harm.
Case closed.

Satellite Pro A200 (PSAE4): DVD drive permanently blinking

Hello,
I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
Any help would be really appreciated.
Thanks !

Hi
According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
Am I right?
To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
What do you think?

Satellite Pro A200-1F9 - FN buttons dont work

Hi
My laptop is Satellite Pro A200-1F9 (PSAE7E-007003EN) with Windows Vista Business x64 recently I have swapped my WLAN Wi-Fi card , from standard Intel pro ABG to Realtek 8191SE "N".
Card is recognized and visible in device manager, all drivers are installed, but no network available. System doesnt see any network. In addition I can't find and install proper TVAP which will allow me use FN+F8 combination.
Can somebody help me please solve that problem?

This notebook model is not supported for Win7 64bit. Try to use Toshiba value added package for Satellite Pro P300.
You can find it here .
Post some feedback.

Satellite Pro A200: Wake-up over keyboard using an USB keyboard

Similar Messages

Maybe you are looking for