Satellite Pro A200 - Wifi not responding after loading of Win XP

Hi there, i`m new here and I apologies if this has been covered,i have searched the forum but came up with nothing.
I have a:
Satellite pro a200
Windows XP.
My laptop had xp professional installed and the onboard wifi was working.
I had issues with the laptop overall but the wifi worked. I formatted it last night, installed a new copy of xp home and now the wifi doesnt appear to be recognised. The light is on ,on the switch but i cant seem to get the laptop to recognise its there.
I havent given you much I know but I hope I can get it sorted.
Any questions you may have i will try and answer with as much info as possible.
Thanks, Kirky.

Hello, thanks for the advice.
I have flashed the bios and also installed the latest driver. Now I can see my home network but the notebook now wants a WEP Key to continue. In the last few weeks i have connected 2 xboxs and 2 mobile phones to this network without any issues. Now I want to connect a notebook it is asking for this key and I don`t know what it is, or where to locate it.
Thanks, Kirky.

Similar Messages

Why does Safari not respond after loading OSX Mavericks on a MacBook air

Why does Safari not respond after loading OSX Mavericks on a MacBook air?

What exactly happens? Does it launch at all? Have you tried rebooting?

Re: Satellite Pro A200 - Screen goes black after BIOS screen

Hi,
I'm new to the forum and have quite a big problem. So any help is welcome and appreciated.
My Satellite Pro A200 goes black after the BIOS screen and a black screen with a blinking cursor. Also just before the screen goes black a bleep can be heard which shows windows is booting.
I can access the toshiba set-up screen but not the safety mode set-up.
Kind Regards

Hello
You wrote that you can access the BIOS but have you checked if the HDD is recognized properly? Maybe the computer cannot boot because HDD isnt recognized so you should check this.
If the HDD is recognized I would try a recovery installation from Toshiba recovery disk. It seems that Windows isnt able to start and if you reinstall the whole system it should help to get rid of this. Just go in boot menu and select CD/DVD drive as boot device.
Check this!!!

Aperture not responding after loading

The program will load- I get to the initial screen- but will not respond after I pick an operation. I tried "time machine" and restored from "backup". Neither one worked. I can access my pictures; I just cannot get the program to operate.
Aperture is showing up top, next to the "apple" but that is all. I then get the "beach ball". I have to force close to get it to stop.
The only thing I remember doing since I used it last was to empty the trash to free up some space.
Any suggestions?

Try temporary rename/move aperature library to check is problem in the particular library or in aperture installation. If AP will start, then you will need to repair/rebuild library; otherwise you will need to re-install AP. Btw, as far as I remember Apple strongly recommend do not use Time Machine with AP.

Satellite Pro A200 PSAE1E: Cannot get hotkeys working on Win XP

Hi,
I have a Satellite Pro A200 PSAE1E which came with Vista on it, I have reinstalled it with Win XP Pro installed the relevant drivers from the Toshiba download page but cannot get the hot keys working.
I have installed the controls and control driver but this does not seem to work. Have seen a posting about 'common module' somewhere but can't seem to find any links to download it on the download page.
Can anybody help?
Many thanks
Iain

The Controls utility and the Controls driver allow you to customize and preset TOSHIBA special button settings. But these are not a FN keys!!!
You need to install the Hotkey Utility if you want to use the FN keys.
Further hint:
Its important that all Toshiba drivers and Utilities are installed in the right order.
On the Toshiba driver page you will find a txt file called installation instruction.
Please install all the drivers and tools in the order mentioned in this instruction!
Greetings

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Satellite Pro L100 does not run after BIOS update

Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
What do I do?
The first thing that came to mind was to reset the BIOS.
One problem, I can't find the RTC battery or a jumper switch.

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

Firefox will not respond after loading it onto my Windows 7 computer

I downloaded Firefox browser to my new Windows 7 computer and installed the program. I used Firefox for a while without any problem for a while and logged off of the internet and shut my computer down. The next morning, I turned on my computer, and clicked on my Firefox icon. I got a blank screen with the little aqua circle working. Then a message appeared in the upper left hand corner of my computer display, which read "Mozilla Firefox Not Responding". I closed the program. ''' By the Way, I installed Google Chrome web browser and am currently using it it without any problem. I would prefer to use Firefox though.'''

Does Firefox starts up when you first open it after rebooting the computer but hangs the next time you try to start it? If so, then there's a [https://bugzilla.mozilla.org/show_bug.cgi?id=1005487 bug] in Firefox 29 where Firefox hangs on exit when the setting "Clear history when Firefox closes" is selected, so that you get an "already running but not responding" error the next time you ttry to start it. In that case, end the firefox.exe process in the Windows Task Manager (or reboot the computer) then reset your Firefox Privacy options and UNCHECK the option "Clear history when Firefox closes". See this article for details:
[[Settings for privacy, browsing history and do-not-track]]
If that's not the problem and Firefox still not open even after rebooting the computer then try starting in Firefox Safe Mode by holding down the shift key while starting Firefox. If Firefox starts then see the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to narrow down the cause.

MacBook Pro Retina Keyboard not responding after Sleep

Hi,
I am having an issue that I have noticed in Mountain Lion. When I put my MBPr to sleep, either via Apple->Sleep or by Closing the lid (maybe sleep for 5-10 min or more); the Keyboard will not respond at all and cannot enter the Password to get back in.
I have tried to remove the lock screen in order to avoid that but the same things happens for any App that I try to use and requires keyboard. The Apple Magic Mouse works fine, and I have no external keyboard connected.
I have taken it to the Store and the ML was re-installed...still same issue
Anyone had this happen and able to determine the cause?

Just some more info regarding this:
Pressing a key on the usb key board will bring up the log in screen and the mouse works (plugged into the keyboard) but text input from the keyboard doesn't work.

Re: Satellite A200-1BQ, not responding after screen saver

Hi, I have a Satellite A200, Windows 7 32 bits OS. When running the screen saver the PC stop responding. Have to switch of because no response.
If you have report the some problem please send.

Hi
Does this mean that Windows 7 hangs and does not response only when the screen saver has been enabled?
Did you notice the same issue using Win XP or Win Vista?
If not then this notebook behavior could be related only to Win 7 and I think it could caused by graphic card driver
Remove the graphic driver which you have installed and test the screen saver using the windows 7 common driver
It would be interesting to know what happens

Satellite Pro A200 does not start up

Hi
I have an A200 with XP PRO installed.
After a routine defrag and restart the laptop when booting back up gets to my screensaver page then makes the noise off shutting back down.
No toolbar appears just goes straight tomy log in page and i have to shut it down?
When I try to restart in any of the three safe modes, again I get to the log in stage press enter the screen flickers twice and I get the login page again?
I have taken out the Ram stick and HDD to see if anything is amiss but they both seem fine..
Xmas eve and no laptop. Yeah I know. Get a life.
Can anybody help?

If you cannot even start your notebook in safe mode it is very bad situation.
What you can try is to obtain Microsoft installations CD and try to boot up with it and use REPAIR option.
If this will not help I really don't know what you can do aside from clean OS installation with recovery media.
Do you have some important data on the HDD?

TS1398 Wifi not responding after the software update. restored the system but still no luck.

After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

WXP WLAN Driver installation on Satellite Pro A200

Hello,
I installed Windows XP SP2 for a customer on Satellite Pro A200 (PSAE7E) and installed after is talked to the German support hotline every driver like in the test-instal.txt but I don't get the Atheros WLAN card work.
It is an ar5bxb72 from Atheros, but no way.
I get every driver in that list working with the hardware but not the WLAN-card although I installed it like in the list.
Anybody got a hint for me?
Greets
Marco

Hi dude
Are you sure the notebook was equipped with the Atheros WLan card? According to some information which I found in the internet, this notebook was delivered with Intel or Atheros WLan card!
I have checked the Toshiba page provides an Intel WLan drivers and Atheros Wireless Lan Client Manager. The Wireless Lan Client Manager is not the driver but only the tool which helps you configure your wireless network card and gives you more configuration options than the windows embedded configuration functions.
I would recommend downloading the WLan driver from this Toshiba WLan portal:
http://aps2.toshiba-tro.de/wlan/
By the way; if you use XP on this Vista preinstalled notebook then you will have to update the BIOS to the XP version too!
Greetings ;)

Satellite Pro A200: Card Reader does not work after XP installation

Hi...
I have removed Windows Vista from my Satellite Pro A200 in favour of XP Home.
I'm much happier with the machine now but am unable to get any response from the Card Reader. There's no mention of it in the User's Manual that came with the machine.
I can't find any reference to it in the Control Panel's Hardware Manager and nothing changes in there when I insert an SD memory card.
I didn't have cause to try the reader prior to removing Vista, so I don't know if it ever worked... although I imagine that it did.
Running a search for a driver in the download section didn't have any success and this forum has no direct answers.
Does anyone have any idea what I need to do to get this to work?
Popa Mintin.

Hi
I dont see any serious reasons why your card reader shouldnt run/function with installed Windows XP.
What you need is the right driver.
The Toshiba driver page provides all Win XP drivers and there is also an XP driver for the multi card reader.
You need a Texas Instruments Flash Media Driver. This is a driver for your Bridge Media Slot.
This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
Cheers

Satellite Pro A200 failing to connect with iphone hotspot via wifi

Apologies if I get some of the technical jargon wrong but I pretty useless when it comes to IT issues.
I have a Satellite Pro A200 and had problems connecting to various wifi connections.
The computer would see the wifi connection and connect to it but i wasn't able to connect to the internet.
The office issue has now been sorted by our IT support guy (security settings on the new router we too complex for my PC or something like that) but he wasn't able to solve the problem of not being able to connect to my iphone to use the 'hotspot' feature via wifi.
Does anyone know a way of solving this or is it a simple fact of the laptop being too old and really needs updating?
Thanks for any assistance anyone is able to give.

> Does anyone know a way of solving this or is it a simple fact of the laptop being too old and really needs updating?
This is not a question of notebook age
As far as I know not all mobile phone providers support this
You should firstly ask your mobile provider if you can use the tethering function.
If this would be supported my mobile provider, then you have to connect the iphone to the notebook firstly
For that youve got two options: you could use the BT connection (in such case check if notebook supports BT too) or via USB cable provided with the iPhone.
(PS: As far as I know tethering is support by iOS3.0 and higher)
After the iphone has been connected to the notebook you need to enable the tethering on iphone.
Under Settings -> Network you should see the option internet tethering this need to be enabled.
Now you should be able to see that in Network & sharing Center of the control panel.

Satellite Pro A200 - Wifi not responding after loading of Win XP

Similar Messages

Maybe you are looking for