Satellite Pro A210 DVD Drive not working - error code 39

Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?

Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help!

Similar Messages

DVD burner not working Error code 0x80020022 & 0x8002006E

When I try to burn a DVD I get the following errors . (Error code 0x80020022) & (0x8002006E)
When I put a dvd movie in it will show on the desktop and play in dvd Player.
It will show a CD in the finder and will play it in the finder and in iTunes. iTunes is can also burn CD.
I have brunt some dvds in the past month but it was hit and miss. Now I can not burn any dvds.
I booted up my iMac from my MacBook when I go to burn the dvd I get the same error. So now I'm not to sure if it is a software issue. I have also done a restart while holding P & R "option & Apple" to reset the Pram.
I'm going to erase the HD tonight and reinstall OS 10.5 to see if that fixes the problem.
If there is anything more I can do please let me know. I dont mind replacing the Supper Drive but I dont want to spend the money if that is not going to fix the problem.

I keep getting this code come up when i try to burn 0x80020022. My imac is 8 months old, and after looking on mac forums the only thing that seems to work is to go in and play around with the international system prefs. It will then burn a CD, although very slowly. A week later I go to burn a cd and this happens again! This surely can't be right with an 8 month old machine, and does this mean my DVD drive is going to die soon? I can't keep having to adjust the prefs every week.
Does anybody have any answers?
Cheers

Disk Drive not working - Error Code 19

I have a recently purchased HP Pavilion Notebook, with Windows 8.1, and today my Disk Drive stopped working.
First up, I tried another disk to see if this was the issue; it also wouldn't work. Then I went into Device Manager and CDDVDW SU-208CB has a yellow exclaimation mark icon next to it. In the properties it says it has error 19, what do I do?
Another forum said to delete something in the registry, however, I'm not sure where I can find it, and what exactly to delete. Nor do I know how to reinstall the device.

Hi,
Please use the following methods/tips to fix:
http://support.microsoft.com/kb/314060/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite L30 - DVD player not working - error code 19

Mat****a dvd-ram UJ-850S ATA device
It has a problem and doesn't work, it shows this message in device manager:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I click check for solutions, it searches for a while and gives me nothing, just disappears.
How do I get it to work again?
Thanks

Hi,
Have you tried to remove Upper/lower filters? How to do it I took from Toshiba support:
*Follow these instructions for clearing the Upper/Lower Filters:*
Click on Start --> Run --> and type in 'regedit' followed by the enter key
Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
Expand the "SYSTEM" Key
Expand the "CurrentControlSet" Key
Expand the "Control" Key
Expand the "Class" Key
Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
High light this key by left clicking once on it
On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
Please exit the registry by clicking on the "X" in the top right hand corner of the screen
Reboot your computer

Dvd drive not worked properly

i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.

tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

DVD Drives not working after Snow Leopard install

Hello all. I'm having problems after installing Snow Leopard. Om my MacBook Pro, my DVD drive doesn't even read discs anymore. It keeps it spinning for a while and then ejects it.
Coincidentally, the drive on my iMac 3+ GHZ is not accepting my discs into the DVD drive. It's not sucking in the discs anymore.
Both of these things started happening right after the Snow Leopard installation.
Can anyone help?

Have been running without trouble and had total ability to burn disc images to DVD until SL installation. after installation, every burn attempt fails to complete, give me an unrecoverabl, unable to restart error. I does burn data to the disc, but fails at some point near the end of the burn wich renders the disc a "coaster". I put my spare HDD back in wich was running 10.5, the problem exists with that drive also. My next step was to load a fresh drive with 10.5, even then the problem exists. I find it hard to believe that the drive failed exactly when SL was installed, more likely that the installation changed a hardware setting, or installed a firmware update which cause the problem. As I am a repair tech, I have done a ton of reaserch on the subject, and I find that litterally 10's of thousands of people have had the same issue after the SL upgrade. Come on Apple, I always heard you were better than Microsoft, but as everyone can see there is a problem. Get working on the fix and patch it just like Microsoft.

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

My ITunes will not work error code 2503

window XP cannot uninstall ITunes. ITunes will not operate. error code 2503

Hello, bearbassman.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

DVD Drive not working Satellite Pro A100 - error Code 37

Hi
Anyone help on this?
I have an A-100 and the DVD drive has stopped working in XP. I've checked device manager and XP see's the drive but returns this error 'Windows cannot initialize the device driver for this hardware. (Code 37)'
I've also noticed that ASAPI.sys is not running in task manager.
I'm guessing this has got something to do with the problem.
I've tried reinstalling device drivers but this has made no difference. Any suggestions?

Hi
The error code 37 means the driver returned failure from its DriverEntry routine.
You could try to remove the driver from the device manager and after new reboot the OS should recognize the device drive and initialize the driver again.
If this does not help try this procedure:
Run REGEDIT and open up the following folders:
HKEY_LOCAL_MACHINE
-> SYSTEM
-> CurrentControlSet
-> Control
->Class
{4D36E965-E325 -11CE-BFC1-08002BE10318}
After clicking on {4D36E965-E325 -11CE-BFC1-08002BE10318} you should see two settings on the right-hand side:
"Upperfilters"
"Lowerfilters"
Click on each of them, press DELETE and click YES.
Then reboot the notebook and check if it was useful.

Satellite Pro A30: CD/DVD drive not working - How to restore OS?

I want to run the recovery discs to restore my laptop to original condition but the cd/dvd rom is not working.
Does any one have an idea how I can do this either by connecting my laptop to another pc or is there a programme on the web I can access to do this for me.
Bacically even after running CCleaner and other programmes the laptop is still running slow and struggling.

Hi mate
Im not quite sure if the old Sat Pro A30 is able to boot from USB drive. In such case you could try to install the OS from USB flash stick.
Here is a interesting posting about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=63986

DVD drive not working on Satellite Pro U400-142

My DVD drive is not working. I insert a disk, can hear the drive working for some time but then nothing happens. I checked 'Device Manager' - under DVD/CD-ROM drives it shows: MAT****A DVD-RAM UJ862AS, but there is a black exclamation mark on a yellow circle next to it. I opened the 'Properties' dialogue box and under device status it says:
'Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
I'd like to try to try to solve the problem by re-installing the driver. I have checked the Toshiba website for the driver, but cannot find it.
I'd be most grateful if someone could give me any ideas on how to sove this problem.
Thanks
P

What you can do is follow:
Remove optical disc drive from device manager and restart your notebook.
The drive should be recognized and installed properly. If the same happen again try please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

CD/DVD drive does not work - error code 39 on Satellite A300

Good evening.
I've encountered a problem with my Satellite A300.
I can't get the disk drive to function.
Device manager says the driver is current. But also says it is corrupt "code 39".
I have tried downloading new drivers from Toshibas website but they all come up as code 39 unable to install. The first I noticed it was last night when I was installing Norton 360. I had the cd it worked once then nothing.
Has anyone ran across this before?
Any help would be greatly appreciated.

Hi
I had the same issue and I found a solution here in the forum.
The problem is that your Windows registry is muddled up.
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Secondly you have to start the registry and have to remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally reboot the notebook and test the CD/DVD drive again!
Bye

Error code 39 - CD/DVD drive not working properly

Satellite C55D-5170 came with Win 8 and the first automatic software update upgraded it to Win 8.1.
I believe this is the first time I have tried to access the DVD drive but I had successfully used the flash drive. The DVD drive is not recognized. The Device Manager, under DVD/CD-ROM drives shows the yellow triangle in front of TSSTcorp CDDVDW SU-208FB. Clicking on that shows the following:
Location: Bus Number 2, Target Id 0, LUN 0
Device status
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
{Unable to Load Device Driver}
%hs device driver could not be loaded
Error Status was 0x%s
I looked through these forums and found that this Code 39 is frightfully common and does not seem to have an answer. I went to Microsoft's site and using their fix it, but nothing changed. I tried to update the driver but got the message saying I already had the current driver. I uninstalled the driver and rebooted the laptop and the driver was reinstalled but nothing changed, still not recognizing the DVD drive.
I need a solution so that I can install a WiFi router. It would be nice to play some CDs as well. Thanks in advance to anyone who can provide a solution.

Satellite C55D-A5170
Downloads here.
One should follow these instructions when upgrading to Windows 8.1.
   How to Update from Windows 8 to Windows 8.1
Code 39   ...   I went to Microsoft's site and using their fix it, but nothing changed.
You don't say which site and which fix. If it's the usual registry problem, this article should apply. Work your way through the suggestions.
   Your CD or DVD drive is not recognized by Windows or other programs
-Jerry

Satellite Pro M30 graphics card not working when driver is installed

Hi all,
Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
Anyone can help me?
[email protected]

It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

Satellite Pro A210 DVD Drive not working - error code 39

Similar Messages

Maybe you are looking for