Satellite Pro A30: CD/DVD drive not working - How to restore OS?

I want to run the recovery discs to restore my laptop to original condition but the cd/dvd rom is not working.
Does any one have an idea how I can do this either by connecting my laptop to another pc or is there a programme on the web I can access to do this for me.
Bacically even after running CCleaner and other programmes the laptop is still running slow and struggling.

Hi mate
Im not quite sure if the old Sat Pro A30 is able to boot from USB drive. In such case you could try to install the OS from USB flash stick.
Here is a interesting posting about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=63986

Similar Messages

Re: Satellite Pro A120 - CD/DVD drive doesnt work anymore

Hi, I have a Satellite Pro A120, and keep on having problems with my CD/DVD driver. I spoke to few of you on the phone, the fix it solution on http://support.microsoft.com/kb/314060 seems to do the trick for a couple of hours and then I am back to square one.
Today, I think I have reached the end of my possibilities, the solution above no longer works, I have a message that says that it doesn't work for the specifications of my PC.
In the meantime, something must have happened because my webcam, that I have since 2007, no longer works either, and in spite of the fact that I have tried time and time again to install those drivers, the PC just won't allow me.
It's a dead end really...
And... yes, I have done the business of going to Device Manager, disable the CD/DVD driver facility etc....
Thanks for your help
Hotxbun

Is the drive shown properly in device manager?
When you remove CD/DVD drive from the device manager after restart it should be recognized again. Can you use it after doing this?
Have you tried to reinstall OS using Toshiba recovery CD/DVD?

Dvd drive not worked properly

i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.

tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

My touchsmart iq500 series PC dvd drive stopped working. how do i fix it

my touchsmart iq500 series PC dvd drive stopped working. how do i fix it

Hi Kozi:
Welcome to HP forum. You mean replacing this page will show you how to excess it and replace it. You still need to order a new one. Ounce you open it and remove it you will then have the part number to order a new one. I choose Touchsmart IQ503jp closeted number listed here in United States to your computers number. http://h1005.www1.hp.com/ewfrf/wc/document?docname=c01498907&cc=us&dlc=en&dlc=en&product=37718827&tm...

External DVD drive not working with Lombard G3 333

I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
Also, would it be difficult to add a DVD logic board to my Lombard?
Joey

xamdu,
I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
http://patchburn.de/download.html
If the above is unsuccessful, take a look at this workaround:
http://www.macosxhints.com/article.php?story=20040330171655882
You can swap logic boards but it does require a lot of disassembly.
Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

Satellite Pro A210 DVD Drive not working - error code 39

Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?

Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help!

DVD Drive not working Satellite Pro A100 - error Code 37

Hi
Anyone help on this?
I have an A-100 and the DVD drive has stopped working in XP. I've checked device manager and XP see's the drive but returns this error 'Windows cannot initialize the device driver for this hardware. (Code 37)'
I've also noticed that ASAPI.sys is not running in task manager.
I'm guessing this has got something to do with the problem.
I've tried reinstalling device drivers but this has made no difference. Any suggestions?

Hi
The error code 37 means the driver returned failure from its DriverEntry routine.
You could try to remove the driver from the device manager and after new reboot the OS should recognize the device drive and initialize the driver again.
If this does not help try this procedure:
Run REGEDIT and open up the following folders:
HKEY_LOCAL_MACHINE
-> SYSTEM
-> CurrentControlSet
-> Control
->Class
{4D36E965-E325 -11CE-BFC1-08002BE10318}
After clicking on {4D36E965-E325 -11CE-BFC1-08002BE10318} you should see two settings on the right-hand side:
"Upperfilters"
"Lowerfilters"
Click on each of them, press DELETE and click YES.
Then reboot the notebook and check if it was useful.

DVD drive not working on Satellite Pro U400-142

My DVD drive is not working. I insert a disk, can hear the drive working for some time but then nothing happens. I checked 'Device Manager' - under DVD/CD-ROM drives it shows: MAT****A DVD-RAM UJ862AS, but there is a black exclamation mark on a yellow circle next to it. I opened the 'Properties' dialogue box and under device status it says:
'Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
I'd like to try to try to solve the problem by re-installing the driver. I have checked the Toshiba website for the driver, but cannot find it.
I'd be most grateful if someone could give me any ideas on how to sove this problem.
Thanks
P

What you can do is follow:
Remove optical disc drive from device manager and restart your notebook.
The drive should be recognized and installed properly. If the same happen again try please > http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

Satellite Pro A120-10W - Function keys not working since hard drive wipe

Hello,
I have a Satellite Pro A120-10W running Windows XP Pro SP3, and have just had my hard drive wiped, because of viruses. Everything seems to work fine, but I cant use the function keys to change the brightness etc. I have looked at various help forums however most seem to give answers for Windows 7 or vista. 7
Can someone help please?
Thanks in advance.

Hello
As you can see in other threads, you need special drivers/tools for FN keys to get them working because there is no Windows standard driver for these keys.
Anyway, you have to download Common Modules as Akuma wrote. After installation the keys should start working again.
You can download the tools on official Toshiba website.
If you have problems with installation or it was successful, just post some feedback. ;)

Satellite Pro A200 (PSAE4): DVD drive permanently blinking

Hello,
I have been using a Satellite Pro A200 (PSAE4) laptop for some time now without any major issues.
My dvd drive (tsst crop TS-L632H) is no longer working for a few days now... More precisely, its LED is permanently orange blinking. Drivers are up to date. The eject button doesn't work either. No disc is inserted. The drive seems fine in the Windows device manager...
If opened manually and if a disc is inserted in the drive, I can't see any data. Can't boot on the disc either.
I'm running under Vista 32bit SP1 with the latest bios available on the toshiba website (2.40).
Since I need to fix the frequently reported "black screen" issue before login prompt, using the windows installation disc
Any help would be really appreciated.
Thanks !

Hi
According to you page you are not able to boot from any CD or DVD, not even from the Toshiba Recovery CD.
Am I right?
To be honest, Ive no idea why such issue happened but in my opinion its related to the hardware malfunction and only the replacement could helps
I dont know how old you notebook is but maybe the warranty is valid and you could replace it for free
What do you think?

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Error code 39 - CD/DVD drive not working properly

Satellite C55D-5170 came with Win 8 and the first automatic software update upgraded it to Win 8.1.
I believe this is the first time I have tried to access the DVD drive but I had successfully used the flash drive. The DVD drive is not recognized. The Device Manager, under DVD/CD-ROM drives shows the yellow triangle in front of TSSTcorp CDDVDW SU-208FB. Clicking on that shows the following:
Location: Bus Number 2, Target Id 0, LUN 0
Device status
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
{Unable to Load Device Driver}
%hs device driver could not be loaded
Error Status was 0x%s
I looked through these forums and found that this Code 39 is frightfully common and does not seem to have an answer. I went to Microsoft's site and using their fix it, but nothing changed. I tried to update the driver but got the message saying I already had the current driver. I uninstalled the driver and rebooted the laptop and the driver was reinstalled but nothing changed, still not recognizing the DVD drive.
I need a solution so that I can install a WiFi router. It would be nice to play some CDs as well. Thanks in advance to anyone who can provide a solution.

Satellite C55D-A5170
Downloads here.
One should follow these instructions when upgrading to Windows 8.1.
   How to Update from Windows 8 to Windows 8.1
Code 39   ...   I went to Microsoft's site and using their fix it, but nothing changed.
You don't say which site and which fix. If it's the usual registry problem, this article should apply. Work your way through the suggestions.
   Your CD or DVD drive is not recognized by Windows or other programs
-Jerry

External DVD Drive not working with osx 10.8.5

Hi, I'm having issues with my MacBook Pro 15" 9,1 working with an external DVD drive. I am running OSX 10.8.5 and have been troubleshooting this issue for a few weeks. The optical drive itself is the original drive that came with the computer, but I have put it in an external enclosure to free up space inside the body of the MacBook Pro. The drive seems to function fine with CDs (playing and ripping - haven't tried burning yet) but is extremely inconsistent/barely functional with DVD playback. Only one DVD in my collection properly works - others bring up error messages in multiple programs (VLC, Wondershare, the native DVD application, etc.) and another continuously loops back to the main menu each time "Play Feature" is selected. These are a variety of DVDs that range from obscure to commercial and old to new (the oldest and most obscure is the only one that works). After deciding that it is not the programs, I replaced the enclosure. I still had the same exact issues. I reset PRAM - no solution there. I created a new user on my computer, installed the same media players and had the same luck. I then used the same external drive on my old MacBook Pro 15" (5,4 running OSX 10.6.8) to see if it would work there. It worked perfectly (with the native DVD application). What is going on here and how can I get my new computer to recognize the external DVDs reliably and consistently?

older superdrives were Hitachi mfg, new ones are Panasonic. Since yours is new and panasonic, indications are it wont work thru the enclosure on your NEW macbook, rather as you state on your older Mac.
until you said it worked fine on the old machine, the logical conclusion is a dirty lens on the laser since it reads CDs fine but most DVD not, since the track is much smaller.
Considering a new superdrive is only $48 on ebay ,or $78 for a new superdrive, your frustration might be too much, and just grab a new superdrive.
Your detailed information indicates a firmware incompatibility of the panasonic superdrive thru an enclosure
This is the new superdrive, made by panasonic as you have in your enclosure:
http://www.ebay.com/itm/like/221280580133?lpid=82
of course thats a lot of trouble buying that AND an enclosure, easier still is just getting a Mac superdrive inside its working enclosure designed for use as such:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

A 205 CD/DVD drive not working, and slow start-up

My A 205 Satellite laptop no longer recognises its CD/DVD drive. Drive does not work, though it can be heard spinning when a disc is in it, and it does not show in My Computer. I have been into the registry and removed the upper and lower filters, but the drive is still not reconised. Can anyone help? The same laptop also takes much longer to start-up than it used to - the start-up progress bar seems to stick at about 75% for a couple of minutes before proceeding and letting themachine start. Machine is two years old and is running Windows Vista. Suggestions appreciated.

> So far, all I can think is that the drive has had it and needs replacing, but it's not even a year old!
There is no time limit where you can say: ok now it is acceptable if the drive is defective.
If you are sure that ODD is defective contact nearest Toshiba service provider as soon as possible and ask for help.
Addresses and phone numbers you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
Good luck

Satellite Pro A30: CD/DVD drive not working - How to restore OS?

Similar Messages

Maybe you are looking for