Satellite Pro A300-1H2 - Windows does not recognise HDD

Hi,
i'm a newbie, this has probably bin asked before so if it has you'l have to excuse me, i have a satellite pro A300-1h2.
I got the blue screen unmountable boot volume, so have tried to fit a new samsung drive. I put in my windows disc it loads all the drivers then says there is no hard disc?
In bios it recognises it ???
Thanks if anyone can help

Hi
The problem is that your notebook supports the HDD SATA controller but the OS system does not contain the SATA drivers
You could set in BIOS the SATA mode to compatible.
This will allows you to install the OS without the installation of SATA drivers.
Greets

Similar Messages

Re: Satellite Pro A300 - DVD drawer does not open most of the time

I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?

Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button?

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

Windows does not recognise my phone

I get this message when I connect my phone to all computerr,
the last USB device connected has malfuntioned and windows does not recognise it??

Hello,
Check out these steps from Apple: http://support.apple.com/kb/TS1538
This should help!
Regards,
Jake

Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!

Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Satellite Pro A300-28R - Windows starts up with wrong display resolution

OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon 3470 HD graphics card.
I recently connected my laptop to a TV via the S-video connection. This worked fine. The problem is that ever since then every time I start my laptop Windows starts with the S-video display resolution of 600x800.
I have tried changing the settings in both Control Panel and using the ATI CCC, having both selected and applied these settings but each time Windows starts now it boots with the above display resolution.
Following this I have also uninstalled and reinstalled both my display driver and the Toshiba Value Added package but the same problem persists. I have searched with Google about this problem and haven't been able to find anything useful.
Any help would be greatly appreciated.

Hi thanks for your responses! Originally I used the method of closing the laptop screen while connected to the s-video and then opening the screen and logging into Windows. This then automatically detects the display and changes to that output. To get out of this you can do either do the reverse or pres Fn+ F5 to undo. This has worked perfectly for me before with VGA connections. Its only since connecting to s-video that now no matter what, every time the laptop starts up even when it is not connected to any external display, it loads with the resolution 800x600. This is not the first time I have used s-video, but it is the first time I have had this result after doing it.
Interestingly if I change to the appropriate resolution and do a restart. The system restarts and loads to the logon screen and then into Windows in the resolution I specified before the restart but then after fully loading Windows it then changes to 800x600. It is as if the laptop is detecting that there is something connected to the s-video when there is not. I have read a fix for this whereby you can go into the system registry and turn off the feature for automatically detecting displays but I use external displays frequently and this is not a satisfactory solution. This worked perfectly before.

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Satellite Pro L10: sound card does not support Windows 7

Hi
i have a Satellite Pro L10 so i installed a Windows 7 on my system but my laptop can not support Windows 7.
I need update of sound card for Windows 7.
The model of sound car is Conexant CX20468-31 AC97 Audio Sound Card.
Please help me

Hi buddy
What to say first of all you will not get official drivers for this notebook for Win 7 or Vista.
This notebook is oldie and I doubt the drivers will be released.
Reading through this forum threads Ive noticed that most of the user use the Vista driver on Win 7 OS.
Maybe you should google for the Conexant AC97 Vista driver and should try a Vista driver on Win 7
Good luck

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

Satellite Pro A200: Card Reader does not work after XP installation

Hi...
I have removed Windows Vista from my Satellite Pro A200 in favour of XP Home.
I'm much happier with the machine now but am unable to get any response from the Card Reader. There's no mention of it in the User's Manual that came with the machine.
I can't find any reference to it in the Control Panel's Hardware Manager and nothing changes in there when I insert an SD memory card.
I didn't have cause to try the reader prior to removing Vista, so I don't know if it ever worked... although I imagine that it did.
Running a search for a driver in the download section didn't have any success and this forum has no direct answers.
Does anyone have any idea what I need to do to get this to work?
Popa Mintin.

Hi
I dont see any serious reasons why your card reader shouldnt run/function with installed Windows XP.
What you need is the right driver.
The Toshiba driver page provides all Win XP drivers and there is also an XP driver for the multi card reader.
You need a Texas Instruments Flash Media Driver. This is a driver for your Bridge Media Slot.
This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
Cheers

Itunes on windows does not recognise ipad

iTunes on my windows xp pc does not always recognise my iPad. Also, the icon in the task bar which indicates when a usb device is attached, does not appear.
Neither of these problems appear when I attach my iPod.
Any suggestions will be welcome
Robin

The iPad, iPod Touch and iPhone do not appear as external drives which is why they do not show up in your Task Bar as externals the way an iPod will do if the option "Manually manage music…" has been checked. With that option selected the option "Enable disk use…" automatically becomes available which means that you can drag files to the unused portion of the drive. This is not the case with the devices mentioned above. As to the recognition of your iPad by iTunes you might want to check to see that the connection is firmly in place each time that you mount it onto the computer-- both the computer USB connection and the Apple Dock connector.

Windows does not recognise my iphone after updating the software to 4.3

Drivers for my iphone does not have Software since i downloaded the 4.3 update, it is telling me to insert a disk and I do not have one.. Please help, I'm desperate. Phone does not restart or turn off, it continuously shows the the message where to connect the usb lead to itunes, but it is not recognised.

Can anyone tell me how to reset the phone, i press the home key and the off switch together, the apple logo comes up, but it still tells me to connect to itunes but there the software is not recognised.

'Windows does not recognise USB'

Need serious help guys, brought a new ipod today and I put my iPod in and it puts some some songs onto my iPod and a couple pictures. Then 1 hour later I find some more songs and plug my iPod back in and now it's not recognising it. This USB slot is the only one being used. Please help me

ok now

Satellite Pro L300 - CD/DVD does not show on my computer

Hello ! This is probably a silly / easy question but I am very new in this and..... my CD/DVD unit does not work.
It does not show on "my computer" and when I insert a disk, nothing happens (except for a buzzing noise but then nothing)....
Can someone kindly help me?
As the helpline does not answer on Saturdays...
Many thanks !

Hi
Try this;
Access the device manager and remove the CD/DVD drive from the device manager list.
Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and check it again.

Windows does not recognise an iPod

My 5G Nano suddenly stopped being recognised by my PC when I installed iTunes 10.5 yesterday.
I reset the iPod and completely removed/reinstalled all Apple software, but Windows 7 can't find a suitable driver. Any suggestions?

I have the same problem. Ill plug my ipod in and itunes will be like "theres an iPod plugged in but theres nothing you can do with it. I have the 6th gen though. I cant find it on my PC either. I've done the same thing, reset and reinstalled everything. Its making me so angry. I have so much new music on my itunes I wanna listen to. I also have windows xp.

Satellite Pro A300-1H2 - Windows does not recognise HDD

Similar Messages

Maybe you are looking for