SATELLITE PRO A300-1NT

I was looking at this laptop and noticed it has 4GIG Memory but it shows it as 2GB+2GB. Does anyone know why it is speced as 2+2?

ETECH wrote:
I was looking at this laptop and noticed it has 4GIG Memory but it shows it as 2GB+2GB. Does anyone know why it is speced as 2+2?
Because it comes "stock" from the factory with a 2GB stick of RAM in each of the two available slots, maybe?
Or am I misunderstanding the question?

Similar Messages

Need newest driver for ATI Radeon 3650 - Satellite Pro A300-1NT

Hello everyone,
I am looking for the newest drivers for ATI Radeon HD 3650 onboard Satelite Pro A300-1NT.
During playing Transformers: Revenge of the Fallen (2009) game by Beenox Inc ..... I get pixelized squares on tthe screen (instead of dust) and eventually blue screen.
I am using Windows XP Pro
I looked for drivers on *Toshiba website* and the only I found are:
12/01/09 Display Driver ATI Windows XP 8.477
*Game support* suggests upgrading driver for a newer one.
*Ati manufacturer support* have driver for ATI Radeon 8650 but not compatibile with Mobile Solution - and when asked for Mobile Ati support I got the ansfer:
+AMD Customer Care for ATI products does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.+
+ [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx|http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +
I ask then are there newest drivers for Windows XP

Hi
I think you have already answered this question by yourself...
As you wrote you can get all drivers on the Toshiba website and if there isnt a newer driver available you can nothing more I think. Satellite A300 isnt a high performance gaming notebook so I think display drivers are not so important.
The only way to get a newer version is that you search on external websites. Maybe you can get the desktop driver working due some modifications I dont know but be really careful!!! Other drivers dont have an overheat protection and you could destroy the graphic chip. Be really careful what you do.
Alternative you can search on the Toshiba website for other notebook models with ATI card too. Maybe there you can get a newer version

Satellite Pro A300-1NT - need Vista 64-Bit drivers

Hello,
I bought the notebook Toshiba Satellite A300-1NT which came with Windows Vista 32-Bit pre installed and an XP Recovery Disc.
I bought the Vista 64-Bit Edition but I didn't find any drivers for Vista 64-bit on your website though it is 64-bit compatible.
How can I get them ?

Hi
It looks like the Vista 64bit drivers for A300 series are not available on the Toshiba European driver page at this time.
Therefore youve got two possibilities;
Either you will wait till such drivers will be released on the driver website or you will try to collect such drivers at your own hand.
You could search and try for example such single drivers released for another notebook series and could search also on website from chip manufacturers like Intel, Realtek, etc
Bye

Satellite Pro A300 - WiFi is 50% slower on XP than on Vista

I noticed that WiFi transfer is slower on Windows XP Pro than with original Vista installed on the same machine.
I tested the issue on Toshiba Satellite Pro A300-1NT - is it possible or my Toshiba is not working propely?

I dont feel I have already checked - btw I have got 2 same models of A300-1NT
the one with XP recovered and second one with Vista onboard - the speed I have checked on different speedtesting websites (like speedtest.pl or dsl.cz) and I can feel the difference downloading te same things as well.
After recovering XP from original CD with SP3 installed or without SP3 the result was clear - 50%.
The system is clean with no additional band - consuming activities.
I have checked RJ Ethernet connection and there was no such issue.
i upgraded Wlan directly from intel website with noo results.
I use 802.11g standard with more aggresive settings than default.

Satellite Pro A300 cant start it WLan - Fn-F8 button problem

Hello,
I have wireless problem with satellite pro a300-1nt model... i instaled win7 ultimate (32bit) and and all work nice except wireless... in device menager is all ok, windows recognize card, it say all work perfectly... but when i try to start it, nothing happens. When i try troubleshoot it say "wireless capability is turned off" and something like "Use the switch on front side of computer, or function keys if available, to enable wireless capability" , but when i use Fn-f8 nothing happens...
Now i dont know what is problem... dont know what to do... windows recognize card, but i cant start it with buttons :(... I try all drivers that i can find but nothing, if someone have similar problem or know something useful, plz share... :(
Thanks
Aleksandar
Ps. sorry for bad english

Hi
I installed Value Added Package and the Flash Card support Utility for L500 model... now when i hit Fn button on top of the monitor there is all combination i can use... Fn + F1, F2, F3, F4, F5.... but no F8 only :( i cant believe :( is there possibility that my card is dead? with this drivers i again cant start that bloody card :( but this (drivers) are correct... :( in Device manager in properties on card i cant find anything enable disable on advance tab... i mean that, there is several options there, few enable disable but no option for Card enable :(... but in device menager it say that card work perfectly... i am so confused :( By the way thank you for try (help) :) i dont know what to do next...
Thank you
Aleksandar

Satellite Pro A300-1GT - Error message when starting webcam

I have a Toshiba Satellite Pro A300-1GT. The problem is that the camera does not work. When I start software it writes that I should restart camera or computer. I'm having Windows 7 and I serched the internet for solutions but I find just a discusions with the same problem without solutions.
Sory for may bad English.

Hi
The cam is not listed in device manager; neither as unknown device nor as USB device?
Well, I read here in the forum that internal webcam is connected to the USB controller on the motherboard and sometimes the connection is loose and therefore the cam cannot be recognized by system.
I think in such case the notebook needs to be disassembled and the connection should be checked. But this seems to be a job for technicians

What is the model number of 9 cell battery - Satellite Pro A300

What is the model number of the 9 cell battery for the Satellite Pro A300? I am ready to make the jump, but I can't find the battery.
thanks
jb

Hi!
The part number should be PA3537U-1BRS
But on the Toshiba website you can for options and accessories and there you can also find the part number:
http://eu.computers.toshiba-europe.com => Peripherals & Services => PC Options & Accessories => Homepage
Bye

Why does Satellite Pro A300 not start when the power button is pressed?

Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?

When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300.

Satellite Pro A300 crashes with blank screen

I have a Satellite Pro A300, AMD CPU, ATI graphics, Vista.
The system worked fine for a year but a few months ago it started crashing, the screen went blank, not blue, anything running, like music, stopped. This can happen after several hours or minutes, or even whilst it is re-booting. All my software is up-to-date, both from Microsoft and Toshiba. I have rebuilt my system from scratch and the symptoms came back.
At first I thought this might be a heat problem but I have monitored this but I don't think this is it. It has crashed seconds after leaving sleep mode when it has not had a chance to warm up.
Anybody got any ideas?
Simon

Hi buddy,
Theoretically it could be an overheating problem so the screen went blank due built in overheat protection...
You should try to clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators and therefore its not necessary to disassemble the notebook.
In your case I would recommend reading this article:

Re: Satellite Pro A300 - DVD drawer does not open most of the time

I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?

Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button?

Satellite Pro A300 PSAGDE re-booting when plugged in

I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
The laptop is a Satellite Pro A300 PSAGDE.
The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
I would like to try and flash a replacement BIOS to see if that will solve the problem.
Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
Is there any way around this problem?
Can I fool the software into thinking it is plugged in?
Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
Thanks
Message was edited by: miainphillips
Message was edited by: miainphillips

So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
Right???
>> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
Therefore in my opinion its definitely not a BIOS problem.
I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
Disable this by following way:
1)Control Panel -> System & Security -> System -> click the Advanced system settings
2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
4)Now click OK and restart the unit
In my opinion the system crashed and therefore the notebook reboots

Satellite Pro A300 - I get the "Windows search" if I left click any folder

I have just purchased a Satellite Pro A300 and downgraded it to Windows XP SP3.
When I left-click any folder icon on my hard drive I get the 'Windows Search' window displayed instead of opening the folder. When I right-click any folder icon, the first item in the menu (bolded) is 'Search'.
How can I change the order of these menu items so as 'Open' is the first item?
Can I remove (Control Panel-Add or Remove Programs) the Windows Search facility without affecting any software I have loaded?
Is having the Windows Search facility installed the likely cause of my problem?
Thanks,
Murray

Have just solved my own problem:
1. The order of items in the shortcut menu for Folders can be changed by updating the actions for specified file types in the Folder Options Menu. Select +Folder Options+ from the +Tools+ menu of any folder, select +File Types+ and scroll down to *Folder*. Click *Advanced* then click *New* and add *Open* with *Explorer* as the program to use. Click *OK* and *Close* and bingo! Appears the order of the short-cut menu in XP is Open before search, but in XP Pro is Search followed by Open/Explore.
2. The Windows Search utility can be safely removed despite the warning issued - the Microsoft website indicates the warning is simply a generic warning and it is highly unlikely that removal will affect any software installed since the Search utility was loaded.
3. The Windows Search utility was NOT the cause of this problem.
Trust this might save others the hours of research I had to do to find this solution ...

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Re: Cannot find drivers for Satellite Pro A300-1HE (PSAGDE)

Hello,
I have a Toshiba Satellite Pro A300-1HE (PSAGDE-00800QFR) with the serial number 78621314Q, but i find it anywhere on the toshiba site.
I'am looking for drivers for the graphic card ATI, it has an ATI Mobility Radeon HD3650.
Where can-i find drivers for this machine ?
Thanks by advance

Hi
Go to Toshiba EU driver page
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
_Choose:_
Notebook
Satellite Pro
Satellite Pro A
Satellite Pro A300
PSAGDE
Thats all.

Satellite Pro A300: cam picture appears which has been taken 6 months ago

Hello everybody,
I have a problem with my Camera Assistant Software. I'm using a Toshiba Satellite Pro A300.
I used once my camera for taking pictures and now after 6 moths I wanted to take a picture again, but it appears the last picture taken 6 months ago. I uninstalled and than reinstalled the software and the same problem occurs. I tried to change some of the settings and this didn't help too.
I would be very thankful, if someone could help me!!!
Message was edited by: TinkerBell

Hey Dr. Lamp,
I think this could be the same problem, but I can't find this "screen cover" in the settings and effects of my camera.
All the other suggestions I have tried (removing the picture, reinstall and so on).
Maybe you can help me to find this function for my Camera Assistant Software version 1.7.
Thank you!

SATELLITE PRO A300-1NT

Similar Messages

Maybe you are looking for