Satellite Pro A300: cam picture appears which has been taken 6 months ago

Hello everybody,
I have a problem with my Camera Assistant Software. I'm using a Toshiba Satellite Pro A300.
I used once my camera for taking pictures and now after 6 moths I wanted to take a picture again, but it appears the last picture taken 6 months ago. I uninstalled and than reinstalled the software and the same problem occurs. I tried to change some of the settings and this didn't help too.
I would be very thankful, if someone could help me!!!
Message was edited by: TinkerBell

Hey Dr. Lamp,
I think this could be the same problem, but I can't find this "screen cover" in the settings and effects of my camera.
All the other suggestions I have tried (removing the picture, reinstall and so on).
Maybe you can help me to find this function for my Camera Assistant Software version 1.7.
Thank you!

Similar Messages

  • Not able to save photos on iPhone 5, which has been taken by iPhone 5 camera.

    Not able to save photos on iPhone 5, which has been taken by iPhone 5 camera.

    Hi, I have a 32 gb I phone 5 which has 25GB space remaining and I tried doing a reset but the photos still keep disappearing. Advise another solution...............

  • I bought a Macbook Pro in August 2011, so it has been only 16 months up to now. However, its logic board is broken now. Can I ask 1) where can I buy this mainboard?, and 2) how much does it cost?. Thank you

    I bought a Macbook Pro in August 2011, so it has been only 16 months up to now. However, its logic board is broken now. I want to ask 1) where can I buy this mainboard?, and 2) how much does it cost?. Thank you

    This is one instance where you'll curse yourself for not having bought the AppleCare Warranty extension and gotten the board for free.
    Anyway, get your model number handy and go look up the parts in www.powerbookmedic.com or www.ifixit.com amongst other places. They've also have videos or photo pictorials on how to do the replacement. Not altogether trivial, be sure to spread the adequate amount of thermal paste on the CPU and GPU, else you'll fry the new board in short order again.

  • M from india, i purchase iphone 4s around 18 mnths ago. I was having 1 year warranty of 1 year that has been expired 6 months ago. Now how can i extend my iphone warranty. Please let me know about this. Thanks in advance..

    M from india, i purchase iphone 4s around 18 mnths ago. I was having 1 year warranty of 1 year that has been expired 6 months ago. Now how can i extend my iphone warranty. Please let me know about this. Thanks in advance..

    If you don't know the sender, then it is most likely a scam or spam email. I get them every day - I just delete them. I also get daily notices from Facebook or someone called Adriana at Facebook even though i do not have an account there. Can't do anything about it - just delete it.

  • Got my images online which has been taken and deleted offline

    I was performing some online-offline experiment.
    While experimenting I put my mobile on Airplane mode and took a new picture with default camera application[BB- Z10]. Then I deleted the picture. Then I switched off the Airplane mode.
    Then I checked my Box account, this deleted image was there online, where as I couldn't find the same deleted image anywhere on my mobile device. This is a serious privacy violation and I was not expecting this from blackberry. 
    Downloaded Box from BlackBerry World

    I expect the answer is that you have a setting enabled to sync pictures to Box, and that you deleted the local picture file but not the duplicate in the sync folder. When you turned the radio on the files in the sync folder were uploaded to Box. If that is what happened, I can make a case that it is a useful feature and user error for not understanding how it works...or rather your experiment revealed how it works and now you know.
    So, am I right?
    - Ira

  • I cannot open a file *.pages which has been created few days ago

    Hi All,
    2 weeks ago I created a document with extension *.pages. I sent it to my private email box and today I downloaded it.
    When I am trying to open it, it gives me an error that this file cannot be opened.
    What happened?
    How I can open this file?
    Thanks in advance
    Alex

    what error do you get?

  • Satellite Pro A300-1E7 - cannot start cam software

    I have purchased the Satellite Pro A300-1E7.
    Webcam is not functioning properly in MSN messenger video call.
    Am having similar problems to the previous posting except I am using Zonealarm.
    I think Zonealarm challenged cec_main.exe in a similar way.
    I have tried to follow the instructions on here but without much success.
    I removed Camera Assistant SOftware and re-installed the driver but doesnt appear to have improved things.
    Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the the camera assistant panel no longer appears on the side of the desktop.
    Any ideas please?

    Hi
    I used the Zonealarm is the past and I was not really satisfied because this software locked everything and most applications didnt work properly even after new configuration! Finally I removed this software and I noticed further advantage; my notebook boots much faster!!
    I think this software would lock the cam software too.
    > Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the camera assistant panel no longer appears on the side of the desktop.
    This would mean that the software was removed and was not installed properly.
    But to be sure, check in control panel -> Software (add & remove programs) if the webcam software is installed.
    Ive got the internal Chicony cam too and its working fine in connection with Skype software. I didnt test MSN but I dont see any serious reasons why it shouldnt work.
    In my opinion you should firstly remove the zonealarm. Then clean the OS using CCleaner. Finally download the webcam software again and reinstall it!
    The webcam toolbar is not always visible on desktop.
    It would appear only if you move the mouse cursor to the place where the webcam toolbar was hidden.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Satellite Pro A300 PSAG9E. Should I keep it or not?

    Hello
    I have just bought a Toshiba Satellite Pro A300 PSAG9E. It came pre-installed with Vista, and also an upgrade DVD to windows 7 professional (which I have installed).
    I tried starting up the machine this morning, however for some reason it wouldn 't boot. All that happened was that the initial toshiba screen would appear, followed by a frozen black screen (showing an underscore in the top left corner).
    The thing is that I seem to have been able to solve this issue, but I just don't understand how/why this happened!
    The issue seemed to be related to the battery. At first I was trying to boot the laptop (with only the battery connected) however it would not start. I dont think this has anything to do with the amount of charge in the battery, as it did have more than enough in it. I then tried booting it with just the power cable (and no battery). For some reason this seemed to do the trick, and the laptop was able to boot. The laptop now also boots when both battery and cable attached.
    Why is this happening?
    The reason I am interested in finding out, is because this laptop has given me a few problems already. The laptop has also been bought very recently, so I can still return it for a refund (which I am seriously considering!).
    What should I do guys? Any help/advice you could give about this would be very much appreciated.
    Thank you
    Jay

    >All that happened was that the initial toshiba screen would appear, followed by a frozen black screen (showing an underscore in the top left corner).
    The blinking underscore in the left corner means that the BIOS battery was empty or something wrong with the HDD (possibly BIOS didnt find the right booting source)
    I recommend accessing the BIOS and to set it to the default. Save the changes and try to boot the unit again.
    You should also keep the notebook connected to the mains for about 24 hours and the notebook should be ON as well.
    This will help to charge the CMOS battery.
    Check this

  • Why does Satellite Pro A300 not start when the power button is pressed?

    Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
    In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
    Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
    What shall I do to get a normal start procedure?

    When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
    When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
    The same happen on my Satellite A300.

  • Satellite Pro A300 crashes with blank screen

    I have a Satellite Pro A300, AMD CPU, ATI graphics, Vista.
    The system worked fine for a year but a few months ago it started crashing, the screen went blank, not blue, anything running, like music, stopped. This can happen after several hours or minutes, or even whilst it is re-booting. All my software is up-to-date, both from Microsoft and Toshiba. I have rebuilt my system from scratch and the symptoms came back.
    At first I thought this might be a heat problem but I have monitored this but I don't think this is it. It has crashed seconds after leaving sleep mode when it has not had a chance to warm up.
    Anybody got any ideas?
    Simon

    Hi buddy,
    Theoretically it could be an overheating problem so the screen went blank due built in overheat protection...
    You should try to clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators and therefore its not necessary to disassemble the notebook.
    In your case I would recommend reading this article:

  • Cooling fan is not working on Satellite Pro A300

    Hi Everyone
    I was asked by a friend to repair their Satellite Pro A300, as their CPU Cooling Fan had stopped working even during POST bootup and the laptop would overheat and shutdown. So I thought it could one of three things:
    # Fan is clogged with dust or dirt
    # Fan bearing has failed
    # Fan power cable was loose
    So I disassembled the laptop and cleaned the fan/heatsink using compressed air and checked the power connection which was solid, but this did not solve the problem, so I replaced the fan and heatsink with another one that I knew worked from the same model laptop that had a fault motherboard because of the random bios boot-up password bug (out of warranty) but still no joy.
    I am beginning to believe that the fan was perfectly fine rather the motherboards cpu temperature sensor(s) that control the fan activation has failed.
    Am I correct, in thinking that this is basically, irreparable without specialised tools and my friend will have content themselves with turning the system off every hourish or is there something else I am overlooking?
    Thank you, for any help.

    Hello
    Im not a technician but for me it sounds like that fan connector is malfunctioning if you have already replaced the fan and therefore it would be necessary to replace the mainboard
    Thats everything what I can say about this Have a look for second mainboard or notebook where you can get a cheap mainboard. Maybe it works. :)

  • Satellite Pro A300-1A8 Vista system restore not working

    I wanted to use system restore due to attempting to reconfigure administrator rights, its somehow deleted all my shortcuts on my menu and messed about with a few things.
    However when i try to use system restore (i have attempted to use it in safe mode, via cmd promp, both together and normal boot), yet all seem to stay hanging in the same green page where it reads something along the lines of 'system is initialising restore etc' (spending 45 mins on this page before i get fed up and shut down the computer). I have tried using different restore points but the same occurs. It like its not working at all.
    Can anyone help with this please?
    My laptop is a Satellite Pro A300-1A8.

    Hi
    You mean the Vista tool which can be found in (Start button -> All Programs -> Accessories -> System Tools -> System Restore) does not work and you cannot set back the Vista to the early time point?
    Well, usually there is no much to do to restore the OS to the early time point you have to star the system restore tool and have to choose the restore point. Then everything should run automatically.
    If this doesnt work then something is messed up as you said in your posting above somehow deleted all your shortcuts on my menu and messed about with a few things possibly the OS has been messed to.
    Try to clean the OS using the free software for example CCLeaner. I use it too. Its great. Repair and clean the OS and check if its possible to use the system restore tool again.
    I found also this MS page:
    [System Restore: frequently asked questions|http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

  • Satellite Pro A300-2CW - Need Recovery disks with Windows XP

    I have a Toshiba Satellite Pro A300 2CW. I bought it with Software Windows XP (included in a CD), which worked perfectly for years. I have reinstalled it several times during this years, but now the CD has deteriorated and it doesn't work anymore.
    Originally the machine had WIndows Vista installed with DVD recovery creation option and a HDD recovery option, but I think this is not possible for Windows XP.
    Do I have any options?Where could I buy the original Windows XP CD?
    Thank you

    Hi
    You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
    Other way you can install own WXP version. All WXP drivers, tools ad utilities can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  • Re: Satellite Pro A300 - shutdown commands mixup

    *Satellite Pro A300-15T Model Serial No. 58256558W, Part No. PSAJ1E-00F00YAR*
    1.It has been observed that when shutdown command is given, sometimes the laptop goes to restart mode and logon screen appears after restart.
    2. When the sleep mode command is given, sometimes it does not go to sleep mode but rather goes to logoff mode and logon screen appears.
    Why the laptop is not properly executing the commands related to sleep, shutdown and restart.
    I have not changed any settings of the power buttons.

    Hello
    Has your notebook factory settings or you have installed own operating system?
    How you give these commands especially command for sleep mode?
    In front of me I have Satellite Pro A300 with original preinstalled Vista. Everything works well.
    Using FN+F3 notebook switch in sleep mode.
    Using FN+F4 notebook switch into hibernation mode.
    I have tested options for power button and closing lid too. No problems at all.

Maybe you are looking for