Satellite Pro A300 PSAG9C-01500Y - FSB question

Hello, I was wondering if anyone could give me some advice on possibly upgrading my new [Satellite Pro A300 PSAG9C-01500Y|http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=8270&p art=8813#spectop] to a different model.
I do not use this system for gaming or anything like that, mostly Office 2007, web browsing, media and programs like Photoshop and Dreamweaver. Nothing too high end.
My model has 800MHz, but after looking at a few different models I see that for $100 or so I can get a higher FSB speed (1066MHz) Like the model [PSAG9C-01J00Y|http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=8270&p art=9131#spectop] which has a little faster CPU as well.
One of the things I have noticed as well is the max Ram for my system is 8GB and most others are only 4GB. I will not be using 64 bit windows, so it doesn't matter anyway.
I would mainly like to know if it is worth worrying about the FSB. I understand how FSB works and what it does, I am just not sure if i need to worry about it.
Any advice or suggestions are most welcome.
Thanks in advance,

Hi
In your case the FSB speed is not really important if you want to use your notebook only for Office 2007, web browsing or webdesign.
The higher FSB is useful if you want to use high performance memory modules with higher speed.
For example; youve got FSB of 533Mhz and memory modules of 800Mhz the inserted memory modules would NOT run at 800Mhz because the lower FSB would slow down the memory speed.
But as I said a higher FSB is not really important if you dont use the notebook for high-end gaming.

Similar Messages

Satellite Pro A300-13X: Question regarding the Product Recovery disks

I recently purchased a Satellite Pro A300-13X notebook with Vista Business installed.
It came with two product recovery discs to install XP professional.
Since I decided just to use XP, I followed the procedure for product recovery and I am now running XP from the first disc. It seems to run properly.
I'm unable to install the second disc and wonder where it is for. It contains 7 application files 001-002-003-004 crc and tpa.
Does anyone know what to do with this disk?

Don't know what this disc contains or how to install it, but check if everything works and if all utilities and programs are installed, which you had under Windows Vista.

Satellite Pro A300-1A8 Vista system restore not working

I wanted to use system restore due to attempting to reconfigure administrator rights, its somehow deleted all my shortcuts on my menu and messed about with a few things.
However when i try to use system restore (i have attempted to use it in safe mode, via cmd promp, both together and normal boot), yet all seem to stay hanging in the same green page where it reads something along the lines of 'system is initialising restore etc' (spending 45 mins on this page before i get fed up and shut down the computer). I have tried using different restore points but the same occurs. It like its not working at all.
Can anyone help with this please?
My laptop is a Satellite Pro A300-1A8.

Hi
You mean the Vista tool which can be found in (Start button -> All Programs -> Accessories -> System Tools -> System Restore) does not work and you cannot set back the Vista to the early time point?
Well, usually there is no much to do to restore the OS to the early time point you have to star the system restore tool and have to choose the restore point. Then everything should run automatically.
If this doesnt work then something is messed up as you said in your posting above somehow deleted all your shortcuts on my menu and messed about with a few things possibly the OS has been messed to.
Try to clean the OS using the free software for example CCLeaner. I use it too. Its great. Repair and clean the OS and check if its possible to use the system restore tool again.
I found also this MS page:
[System Restore: frequently asked questions|http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

Re: Satellite Pro A300-1EA - Difficulties in BIOS update

Hi there,
I attempted to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN) as prompted by Tempro, from version 1.50 to 1.90. The system froze completely during BIOS flash, after waiting for 1 hr, I decided to turn off the power and pray for the best. Thank heavens, everything still works, but the BIOS is still v1.50, not been updated. I have now read so many posts on the forum regarding blotched BIOS update and am now very cautious regarding undergoing any BIOS updates at all.
My questions are: Are there any issues regarding this particular update and/or with the InsydeFlash facility? Are BIOS updates all generally so tricky that they best be avoided? What are the alternative ways to update BIOS, hopefully less dangerous? Also, could there be any potential damage to my laptop related to this miscarried BIOS flash that I should be aware of?
Many thanks indeed!
Monsteress

You can feel you lucky, buddy! :)
Im surprised that your ROM module is not damaged or something else. In most cases this happens if the computer freezes during the update.
Let me give you a word of advice. You should only update the BIOS if its necessary or you have problems/issues with the notebook. You can ignore the messages from TEMPRO if your system runs properly. For example I never update the BIOS if my notebook runs perfect Never touch a running system ;)
Otherwise follow the tips posted by Akuma Before you update the BIOS close all running programs, disable AntiVirus and Firewall and connect the AC/DC adaptor.
On my Satellite U400 I have updated the BIOS without problems.

Cooling behavior after BIOS Flash - Satellite Pro A300

Hello everybody,
I have two laptops, Satellite Pro A300 and Satellite A300. Both have the same configuration, C2D E8300,2GB,ATI 3650 512MB and so on.....
Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. On the version 3.90 cooling was OK, fan worked only when it was necessary. But now after flashing the BIOS fan works permanently, it does not stop.
What I did make, in Vista's Power Options under Toshiba Power Saver I changed the Cooling Method from Maximum Performance to Battery Optimized, the cooling reversed to the normal operation, but the cover (keyboard area) became hot a little bit.
My question is, what is the problem with cooling in the new version (v4.20)? And how to solve this problem?
Again, problem didn't exist before BIOS flashing and the problem is on both computers.
Thank you for your help!
Best regards,
Osman

Hi mate
Thanks for the feedback
> So what do you recommend me, to stay on Battery Optimized mode? Generally speaking, what's the difference between Maximum Performance and Battery Optimized modes in Power Saver?
Usually its advisable to use the Battery Optimized mode only when the AC adaptor is not connected to the notebook and the notebook uses only the battery power.
In such case the notebook does not waste the power using Battery Optimized mode and you could use the notebook much longer using battery only.
Using Battery Optimized mode the CPU and cooling modules run with lowest performance and the CPU does not create high heat dissipation.
This leads to a lower internal temperature and lower usage of cooling modules.
Bye

Satellite Pro A300-1GT - Error message when starting webcam

I have a Toshiba Satellite Pro A300-1GT. The problem is that the camera does not work. When I start software it writes that I should restart camera or computer. I'm having Windows 7 and I serched the internet for solutions but I find just a discusions with the same problem without solutions.
Sory for may bad English.

Hi
The cam is not listed in device manager; neither as unknown device nor as USB device?
Well, I read here in the forum that internal webcam is connected to the USB controller on the motherboard and sometimes the connection is loose and therefore the cam cannot be recognized by system.
I think in such case the notebook needs to be disassembled and the connection should be checked. But this seems to be a job for technicians

What is the model number of 9 cell battery - Satellite Pro A300

What is the model number of the 9 cell battery for the Satellite Pro A300? I am ready to make the jump, but I can't find the battery.
thanks
jb

Hi!
The part number should be PA3537U-1BRS
But on the Toshiba website you can for options and accessories and there you can also find the part number:
http://eu.computers.toshiba-europe.com => Peripherals & Services => PC Options & Accessories => Homepage
Bye

Why does Satellite Pro A300 not start when the power button is pressed?

Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?

When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300.

Satellite Pro A300 crashes with blank screen

I have a Satellite Pro A300, AMD CPU, ATI graphics, Vista.
The system worked fine for a year but a few months ago it started crashing, the screen went blank, not blue, anything running, like music, stopped. This can happen after several hours or minutes, or even whilst it is re-booting. All my software is up-to-date, both from Microsoft and Toshiba. I have rebuilt my system from scratch and the symptoms came back.
At first I thought this might be a heat problem but I have monitored this but I don't think this is it. It has crashed seconds after leaving sleep mode when it has not had a chance to warm up.
Anybody got any ideas?
Simon

Hi buddy,
Theoretically it could be an overheating problem so the screen went blank due built in overheat protection...
You should try to clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators and therefore its not necessary to disassemble the notebook.
In your case I would recommend reading this article:

Re: Satellite Pro A300 - DVD drawer does not open most of the time

I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?

Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button?

Satellite Pro A300 PSAGDE re-booting when plugged in

I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
The laptop is a Satellite Pro A300 PSAGDE.
The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
I would like to try and flash a replacement BIOS to see if that will solve the problem.
Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
Is there any way around this problem?
Can I fool the software into thinking it is plugged in?
Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
Thanks
Message was edited by: miainphillips
Message was edited by: miainphillips

So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
Right???
>> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
Therefore in my opinion its definitely not a BIOS problem.
I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
Disable this by following way:
1)Control Panel -> System & Security -> System -> click the Advanced system settings
2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
4)Now click OK and restart the unit
In my opinion the system crashed and therefore the notebook reboots

Satellite Pro A300 - I get the "Windows search" if I left click any folder

I have just purchased a Satellite Pro A300 and downgraded it to Windows XP SP3.
When I left-click any folder icon on my hard drive I get the 'Windows Search' window displayed instead of opening the folder. When I right-click any folder icon, the first item in the menu (bolded) is 'Search'.
How can I change the order of these menu items so as 'Open' is the first item?
Can I remove (Control Panel-Add or Remove Programs) the Windows Search facility without affecting any software I have loaded?
Is having the Windows Search facility installed the likely cause of my problem?
Thanks,
Murray

Have just solved my own problem:
1. The order of items in the shortcut menu for Folders can be changed by updating the actions for specified file types in the Folder Options Menu. Select +Folder Options+ from the +Tools+ menu of any folder, select +File Types+ and scroll down to *Folder*. Click *Advanced* then click *New* and add *Open* with *Explorer* as the program to use. Click *OK* and *Close* and bingo! Appears the order of the short-cut menu in XP is Open before search, but in XP Pro is Search followed by Open/Explore.
2. The Windows Search utility can be safely removed despite the warning issued - the Microsoft website indicates the warning is simply a generic warning and it is highly unlikely that removal will affect any software installed since the Search utility was loaded.
3. The Windows Search utility was NOT the cause of this problem.
Trust this might save others the hours of research I had to do to find this solution ...

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Re: Cannot find drivers for Satellite Pro A300-1HE (PSAGDE)

Hello,
I have a Toshiba Satellite Pro A300-1HE (PSAGDE-00800QFR) with the serial number 78621314Q, but i find it anywhere on the toshiba site.
I'am looking for drivers for the graphic card ATI, it has an ATI Mobility Radeon HD3650.
Where can-i find drivers for this machine ?
Thanks by advance

Hi
Go to Toshiba EU driver page
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
_Choose:_
Notebook
Satellite Pro
Satellite Pro A
Satellite Pro A300
PSAGDE
Thats all.

Satellite Pro A300: cam picture appears which has been taken 6 months ago

Hello everybody,
I have a problem with my Camera Assistant Software. I'm using a Toshiba Satellite Pro A300.
I used once my camera for taking pictures and now after 6 moths I wanted to take a picture again, but it appears the last picture taken 6 months ago. I uninstalled and than reinstalled the software and the same problem occurs. I tried to change some of the settings and this didn't help too.
I would be very thankful, if someone could help me!!!
Message was edited by: TinkerBell

Hey Dr. Lamp,
I think this could be the same problem, but I can't find this "screen cover" in the settings and effects of my camera.
All the other suggestions I have tried (removing the picture, reinstall and so on).
Maybe you can help me to find this function for my Camera Assistant Software version 1.7.
Thank you!

Satellite Pro A300 PSAG9C-01500Y - FSB question

Similar Messages

Maybe you are looking for