Satellite Pro A300 PSAJ5E: Bad OpenGL performance using CAD-CAE software

Hi,
I've a new A300 Pro type PSAJ5E with ATI HD3650 graphic card.
I successfully downgraded to Win XP using recory DVD with no poblems.
I use different types of professional CAD-CAE software that uses OpenGL.
The performances of one of these are strongly degraded comparing to my previous laptop which had an older ATI non professional graphic card.
The software uses hardware acceleration for overlay planes.
I tried to update graphic drivers but nothing changed.
Could you suggest me something?
Thanks in advance,
Gabriele Fichera

Hello Gabriele
Unfortunately I can not offer any solution for you but according http://ati.amd.com/products/mobilityradeonhd3600/specs.html page OpenGL 2.0 is one of the listed features.
Only thing I can suggest you is to contact software manufacturer and talk with their support. Toshiba as notebook manufacturer offers hardware and preinstalled OS but can not also offer support for thousands of different applications available on the market. Usually software development must test own product on different hardware platforms and find solution to make own product attractive for customers.
What you think about it?

Similar Messages

Satellite Pro A300 PSAGDA-02000R CPU and video card chipset mismatch

can anyone help me with the specs on this laptop.
When I look at the official toshiba brochure for this product it mentions that the CPU Chipset is
"Mobile Intel 965PM Express Chipset"
but the second video card says
"Intel Graphics Media Accelerator GM45"
Which is correct because what I've read on the intel website, the GMA X3100 is used on the mobile 965PM Express Chipset.
Any help will be much appreciated.

To be honest this unit is not known to me but I know that some other Satellite Pro A300 supports other chipsets;
For example:
SATELLITE PRO A300 PSAJ1E-005008BT supports Intel GM965 chipset and Intel GM965 graphic chip
SATELLITE PRO A300 PSAJ5E-001001GR supports Intel PM965 chipset and ATI Mobility Radeon HD 3470
SATELLITE PRO A300-1E7 PSAGDE-003003EN supports Intel Mobile PM45 Express Chipset and ATI Mobility Radeon HD 3470
SATELLITE PRO A300-1HF PSAG1E-00K00SIT supports Intel GM965 and Intel GM965 graphic chip as well.
SATELLITE PRO A300-21B PSAGDE-01S007A3 supports Mobile Intel GM45 Express Chipset and ATI Mobility Radeon HD 3470.
As you see there are many different notebook models with completely different hardware components
I googled too and it seems that the Satellite Pro A300 PSAGDA-02000R supports Mobile Intel 965PM Express chipset and graphic card ATI Mobility Radion, HD 3650 with 512MB + Intel Graphics Media Accelerator GM45.

Satellite Pro A300 - Overheating

Hello,
It has been a year and a half since I got my Satellite Pro A300. Just a week ago it started overheating very badly. At low CPU usage it maintains its regular temperature of 55 - 60C (given the hot summer weather).
However if I try to do anything CPU heavy, the temperature gets to 100C in a matter of minutes and the laptop shuts down. The fan is working, except that it does not seem to generate as powerful air stream as usual, which made me think that it was clogged. I disassembled the laptop, but I could not get to the cooling unit because of the three cables connecting the motherboard to the plastic shell, which have white T shaped connectors that for the live of me I could not pull out even a little bit. Nevertheless, I cleaned what I could with compressed air, and a little dust was cleared, but the fan/radiator did not look clogged at all.
After putting it back together there is no noticeable difference.
I am certain that this is a new phenomenon as I've been running the machine in much hotter weather in worse conditions with CPU loads close to 100% with no trouble. I checked all settings, just in case something had toned down the fan, but the power saver utility is set to "Maximum Performance".
I would appreciate any ideas and help, even just tips on how to disconnect the motherboard cables.
Thanks in advance.

Hi buddy,
I agree with the user above: Cleaning procedure from time to time is really important and if compressed air spray doesnt help it must be done by professional people from an authorized service provider. They can disassemble the whole notebook and clean every part well. You can find a list of service providers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Notebook disassembling is not easy so it should be done from professional people. Just ask the guys for help ;)

Cooling behavior after BIOS Flash - Satellite Pro A300

Hello everybody,
I have two laptops, Satellite Pro A300 and Satellite A300. Both have the same configuration, C2D E8300,2GB,ATI 3650 512MB and so on.....
Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. On the version 3.90 cooling was OK, fan worked only when it was necessary. But now after flashing the BIOS fan works permanently, it does not stop.
What I did make, in Vista's Power Options under Toshiba Power Saver I changed the Cooling Method from Maximum Performance to Battery Optimized, the cooling reversed to the normal operation, but the cover (keyboard area) became hot a little bit.
My question is, what is the problem with cooling in the new version (v4.20)? And how to solve this problem?
Again, problem didn't exist before BIOS flashing and the problem is on both computers.
Thank you for your help!
Best regards,
Osman

Hi mate
Thanks for the feedback
> So what do you recommend me, to stay on Battery Optimized mode? Generally speaking, what's the difference between Maximum Performance and Battery Optimized modes in Power Saver?
Usually its advisable to use the Battery Optimized mode only when the AC adaptor is not connected to the notebook and the notebook uses only the battery power.
In such case the notebook does not waste the power using Battery Optimized mode and you could use the notebook much longer using battery only.
Using Battery Optimized mode the CPU and cooling modules run with lowest performance and the CPU does not create high heat dissipation.
This leads to a lower internal temperature and lower usage of cooling modules.
Bye

Satellite Pro A300 cant start it WLan - Fn-F8 button problem

Hello,
I have wireless problem with satellite pro a300-1nt model... i instaled win7 ultimate (32bit) and and all work nice except wireless... in device menager is all ok, windows recognize card, it say all work perfectly... but when i try to start it, nothing happens. When i try troubleshoot it say "wireless capability is turned off" and something like "Use the switch on front side of computer, or function keys if available, to enable wireless capability" , but when i use Fn-f8 nothing happens...
Now i dont know what is problem... dont know what to do... windows recognize card, but i cant start it with buttons :(... I try all drivers that i can find but nothing, if someone have similar problem or know something useful, plz share... :(
Thanks
Aleksandar
Ps. sorry for bad english

Hi
I installed Value Added Package and the Flash Card support Utility for L500 model... now when i hit Fn button on top of the monitor there is all combination i can use... Fn + F1, F2, F3, F4, F5.... but no F8 only :( i cant believe :( is there possibility that my card is dead? with this drivers i again cant start that bloody card :( but this (drivers) are correct... :( in Device manager in properties on card i cant find anything enable disable on advance tab... i mean that, there is several options there, few enable disable but no option for Card enable :(... but in device menager it say that card work perfectly... i am so confused :( By the way thank you for try (help) :) i dont know what to do next...
Thank you
Aleksandar

Satellite Pro A300 PSAG9C-01500Y - FSB question

Hello, I was wondering if anyone could give me some advice on possibly upgrading my new [Satellite Pro A300 PSAG9C-01500Y|http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=8270&p art=8813#spectop] to a different model.
I do not use this system for gaming or anything like that, mostly Office 2007, web browsing, media and programs like Photoshop and Dreamweaver. Nothing too high end.
My model has 800MHz, but after looking at a few different models I see that for $100 or so I can get a higher FSB speed (1066MHz) Like the model [PSAG9C-01J00Y|http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=8270&p art=9131#spectop] which has a little faster CPU as well.
One of the things I have noticed as well is the max Ram for my system is 8GB and most others are only 4GB. I will not be using 64 bit windows, so it doesn't matter anyway.
I would mainly like to know if it is worth worrying about the FSB. I understand how FSB works and what it does, I am just not sure if i need to worry about it.
Any advice or suggestions are most welcome.
Thanks in advance,

Hi
In your case the FSB speed is not really important if you want to use your notebook only for Office 2007, web browsing or webdesign.
The higher FSB is useful if you want to use high performance memory modules with higher speed.
For example; youve got FSB of 533Mhz and memory modules of 800Mhz the inserted memory modules would NOT run at 800Mhz because the lower FSB would slow down the memory speed.
But as I said a higher FSB is not really important if you dont use the notebook for high-end gaming.

Satellite Pro A300-28R: slow boot and freezing on Explorer/Internet

I have recently bought a Satellite Pro A300-28R and I am quite disappointed about the performance.
1) From the specs it looks like a decent laptop but with booting time of about 3 minutes, "please wait" it is surely not impressing me given the fact that i have not installed anything yet...
2) I will try to uninstall applications like tempro but still I am puzzled by the slow reaction on internet pages.
For example when i go on google and start typing something most of the times the cursor freezes and i have to wait a few seconds before I am able to see what i am typing.
I have only bought it last Friday and I have not used much but surely a bit of a disappointment so far.
Any ideas why the cursor freezes on google or on the internet explorer toolbar?
for info i am using Vista Business OS and Internet explorer
any help welcome

Hello
About slow boot you can read very interesting and useful thread under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
I hope this will help you to understand why this can happen.
After first start you can be faced with this behaviour. Few days updates will be downloaded and installed in the background and you will notice high HDD activity. These activities can slow down notebook performance and what you can notice is this slow typing reaction or freezing video play.
So my advice is to disable automatic updates and set it when updates are available you should get notification but you can start it manually. These all possible vista updates installation is for me big mistake because if you check available updates many of them are optional and some of them are driver updates (3 of them) these updates must not be installed.
Maybe you should install recovery image again. don't connect it to internet and do what is described in posted thread. After optimizing preinstalled OS change settings for Windows update and connect it to internet. Check list of available updates and install important and recommended stuff only.
I do always so and I am happy with my Satellite P200 and new A300. Both of them runs well and I am satisfied with performance.

Satellite Pro A300-1GT - Error message when starting webcam

I have a Toshiba Satellite Pro A300-1GT. The problem is that the camera does not work. When I start software it writes that I should restart camera or computer. I'm having Windows 7 and I serched the internet for solutions but I find just a discusions with the same problem without solutions.
Sory for may bad English.

Hi
The cam is not listed in device manager; neither as unknown device nor as USB device?
Well, I read here in the forum that internal webcam is connected to the USB controller on the motherboard and sometimes the connection is loose and therefore the cam cannot be recognized by system.
I think in such case the notebook needs to be disassembled and the connection should be checked. But this seems to be a job for technicians

Why does Satellite Pro A300 not start when the power button is pressed?

Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?

When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300.

Satellite Pro A300 crashes with blank screen

I have a Satellite Pro A300, AMD CPU, ATI graphics, Vista.
The system worked fine for a year but a few months ago it started crashing, the screen went blank, not blue, anything running, like music, stopped. This can happen after several hours or minutes, or even whilst it is re-booting. All my software is up-to-date, both from Microsoft and Toshiba. I have rebuilt my system from scratch and the symptoms came back.
At first I thought this might be a heat problem but I have monitored this but I don't think this is it. It has crashed seconds after leaving sleep mode when it has not had a chance to warm up.
Anybody got any ideas?
Simon

Hi buddy,
Theoretically it could be an overheating problem so the screen went blank due built in overheat protection...
You should try to clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators and therefore its not necessary to disassemble the notebook.
In your case I would recommend reading this article:

Re: Satellite Pro A300 - DVD drawer does not open most of the time

I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?

Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button?

Satellite Pro A300 PSAGDE re-booting when plugged in

I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
The laptop is a Satellite Pro A300 PSAGDE.
The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
I would like to try and flash a replacement BIOS to see if that will solve the problem.
Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
Is there any way around this problem?
Can I fool the software into thinking it is plugged in?
Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
Thanks
Message was edited by: miainphillips
Message was edited by: miainphillips

So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
Right???
>> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
Therefore in my opinion its definitely not a BIOS problem.
I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
Disable this by following way:
1)Control Panel -> System & Security -> System -> click the Advanced system settings
2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
4)Now click OK and restart the unit
In my opinion the system crashed and therefore the notebook reboots

Satellite Pro A300 - I get the "Windows search" if I left click any folder

I have just purchased a Satellite Pro A300 and downgraded it to Windows XP SP3.
When I left-click any folder icon on my hard drive I get the 'Windows Search' window displayed instead of opening the folder. When I right-click any folder icon, the first item in the menu (bolded) is 'Search'.
How can I change the order of these menu items so as 'Open' is the first item?
Can I remove (Control Panel-Add or Remove Programs) the Windows Search facility without affecting any software I have loaded?
Is having the Windows Search facility installed the likely cause of my problem?
Thanks,
Murray

Have just solved my own problem:
1. The order of items in the shortcut menu for Folders can be changed by updating the actions for specified file types in the Folder Options Menu. Select +Folder Options+ from the +Tools+ menu of any folder, select +File Types+ and scroll down to *Folder*. Click *Advanced* then click *New* and add *Open* with *Explorer* as the program to use. Click *OK* and *Close* and bingo! Appears the order of the short-cut menu in XP is Open before search, but in XP Pro is Search followed by Open/Explore.
2. The Windows Search utility can be safely removed despite the warning issued - the Microsoft website indicates the warning is simply a generic warning and it is highly unlikely that removal will affect any software installed since the Search utility was loaded.
3. The Windows Search utility was NOT the cause of this problem.
Trust this might save others the hours of research I had to do to find this solution ...

Satellite Pro A300: cam picture appears which has been taken 6 months ago

Hello everybody,
I have a problem with my Camera Assistant Software. I'm using a Toshiba Satellite Pro A300.
I used once my camera for taking pictures and now after 6 moths I wanted to take a picture again, but it appears the last picture taken 6 months ago. I uninstalled and than reinstalled the software and the same problem occurs. I tried to change some of the settings and this didn't help too.
I would be very thankful, if someone could help me!!!
Message was edited by: TinkerBell

Hey Dr. Lamp,
I think this could be the same problem, but I can't find this "screen cover" in the settings and effects of my camera.
All the other suggestions I have tried (removing the picture, reinstall and so on).
Maybe you can help me to find this function for my Camera Assistant Software version 1.7.
Thank you!

Satellite Pro A300 - shutdown issue

I have a brand new Satellite Pro A300-15V, which I have downgraded from Vista Business to XP Professional, using the original recovery disc.
Now I have problem shutting down the computer. When I click "Turn Off" it just shuts down and then restarts after a minute or two. Also, I can't bring it back from hibernation unless I shut it down on the button first.
Can anyone help, pls?

Hi guys
Im not 100% sure if my advice could help you but what you should do is firstly BIOS update to the latest version. Ive noticed that new BIOS were released last week for some A300 notebooks series.
After the BIOS update disable the WakeUp on LAN settings in the BIOS.
You could also disable the options like: "Wakeup on keyboard" and "Critical battery WakeUp"
*@cfrigerio:*
It seems youve already disabled this function but please check also the LAN card setting in the device manager -> LAn card properties -> Advanced tab.
There should be an option likes Wakeup on link, Wakeup using APM mode, etc
Disable these options!
Furthermore please check if any 3rd party applications dont wakeup the notebook.
Sometimes the scheduled tasks could be responsible for the irregular waking ups.
Good luck

Satellite Pro A300 PSAJ5E: Bad OpenGL performance using CAD-CAE software

Similar Messages

Maybe you are looking for