Satellite Pro A300 standby and hibernate functions not working properly

I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I'm finding this problem:
Sometimes, (not always: may be it depends on which program is running) when trying to put the computer in stand-by or in hibernate mode, it doesn't stop, but only shuts down the monitor (panel), while the fan goes on running and the power light is green. Obviously, lots of battery energy consumption!
Then there is no other way of resuming than shutting down the computer by holding down the power button long time... but this is not correct!
NB: my computer is always connected to a lan, and generally there are some browser windows open when I put it in stand-by mode.
How can I fix this?
jomurray

Generally you are right but the point is that you have said that this issue doesnt happen always but sometimes.
> Sometimes, (not always: may be it depends on which program is running) when trying to put the computer in stand-by or in hibernate mode, it doesn't stop
Fact is that some single applications which are running can prevent the execution of standby mode or hibernation mode.
Therefore if you are running such programs you will have to close it firstly.
I dont say that this must be done with all applications. ;)

Similar Messages

Satellite Pro A300-1A8 Vista system restore not working

I wanted to use system restore due to attempting to reconfigure administrator rights, its somehow deleted all my shortcuts on my menu and messed about with a few things.
However when i try to use system restore (i have attempted to use it in safe mode, via cmd promp, both together and normal boot), yet all seem to stay hanging in the same green page where it reads something along the lines of 'system is initialising restore etc' (spending 45 mins on this page before i get fed up and shut down the computer). I have tried using different restore points but the same occurs. It like its not working at all.
Can anyone help with this please?
My laptop is a Satellite Pro A300-1A8.

Hi
You mean the Vista tool which can be found in (Start button -> All Programs -> Accessories -> System Tools -> System Restore) does not work and you cannot set back the Vista to the early time point?
Well, usually there is no much to do to restore the OS to the early time point you have to star the system restore tool and have to choose the restore point. Then everything should run automatically.
If this doesnt work then something is messed up as you said in your posting above somehow deleted all your shortcuts on my menu and messed about with a few things possibly the OS has been messed to.
Try to clean the OS using the free software for example CCLeaner. I use it too. Its great. Repair and clean the OS and check if its possible to use the system restore tool again.
I found also this MS page:
[System Restore: frequently asked questions|http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro

Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing it again on my new computer?

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

HT4061 actually i bought iphone 4s in nov 2012 and now its not working properly as the screen goes black ....i lost the bill..is it possible to get another copy of the bill......

actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....

You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Re: Satellite Pro L500-1PU - internal microphone does not work

I have an L500 -1PU Toshiba, running on 32 bit Windows 7,
The webcam is working wonderfully but the internal microphone is not working properly.
I had an external microphone so i hadn't noticed this problem when i got on skype, but i've recently discovered that when using the webcam the person on the other end can hear faint noises from my computer when i'm playing music or watching a video clip.
How can i solve this and get my microphone working properly such that i can control the volume and actually get full service from my otherwise decent notebook?
Thanks

Hi
Possibly this Toshiba FAQ could help you:
+Whistling sound on the Satellite L500+
http://aps2.toshiba-tro.de/kb0/TSB0402UB0001R01.htm
Its a matter of the settings.
This issue occurs if the microphone volume in the speakers properties is enabled.
After disabling this point the issue with acoustic feedback does not appear anymore.
Hope this helps!

Adobe Reader XI and Adobe Reader X Pro (Editable PDF Combobox Search is not working properly.)

I have created Editable PDF using itext(5.3.0) in java. I have used Adobe Reader XI and Adobe Reader X Pro. But in editable PDF combobox search is not working properly.
It's only search first character.

My (admittedly old and slow) system did this too the first time I opened Reader 11, but it "unfroze" after about fifteen seconds, (an eternity in computing time, I know, but it did eventually open all the way) What you're seeing on the right is the "Tools" panel initializing. That's exactly where mine would freeze up on starting. Once it did finally open fully, I clicked the "Tools" link at the top to close the panel, and I opened and viewed a document that way, then closed reader. Now when I open Reader, the Tools panel doesn't initialize and it opens immediately.
Reboot and before you open anything else, open Reader. When you open it, DO NOT try to do anything with it until it fully opens, don't click anything, don't try to switch to another app. Give it time to open fully, and then click the Tools link to close it. Then, open and view a document, and close it. Close Reader and reopen it. the Tools panel should remain closed and Reader should open fully immediately.

Palm Desktop 6.2.2. and Lookup function not working in Windows 7

Palm Desktop's lookup function not working in Windows 7 64bit. Please help.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

I was able to solve this by unchecking compatibility mode and setting the application to run as administrative.

Portege M750 tablet, buttons and fingerprint functions not working in win7

I have installed win7 64 bit ("fresh install" on my M750-129) and i have also downloaded and installed all the newest drivers from toshiba website.
the device manager shows no problem / drivers needed, and trhings like HDD protection work well.
However, i have four groups of problems i would love and appreciate to find answer:
1) when i change the screen position to tablet, it does not change the orientation nor the resolution.
There is no utility to set the desired orientations of screen as it was in vista (horribly unstable and slow OS, though).
This, naturally, is diminishing the usefullness of the tablet finction
2) the buttons do not work properly; the screen rotation button starts excel (!!) , the centre of mobility button starts word (!!), and the toshiba assistance button does not work at all
3) fingerprints: the fingerprint utility lets me to screen my fingerprint, asks if it should save it, and than says "saving impossible; another duplicate pattern exists" which i completely do not understand what it means...
4) some applications are not available at all after fresh install: face recognition, DVD player, bussines card screener - but i can love without those; 1-3 worries me much much more and i would appreciate any functional help. thanx on advance for any try!

hi,
helpful indeed - the installation of the tablet extension pack for vista , it helps to rotate when i switch for tablet even in win7 64 bit - thanxalot!
as for buttons, the first left ones still launch ms word and ms excel....
fingerprints: strangely enough, even if tghat was a clean installation, there were my old fingerprints (user "???") registered and it did not allow me to delete untill i found one little finger i did not register with viste BEFORE the CLEAN isnatallation with formatting the HD - is not that strange?
however, the buttons i hope will be ok once the drivers will be updated by toshibq for win7 64 bit, the main issues were solved for me - thank you once again!

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

CC 2014.2 Illustrator and Photoshop will not work properly on 10.7.5

I have recently download Illustrator and Photoshop CC 2014.2 on my MacBook Pro version 10.7.5.
I notice some of the functions where not working properly. For example Bounding box in Illustrator will not appear for rectangle tool. Color strip on the color box will appear as sold color instead of strips of different colors for me to choose.
I called the Adobe to find out why is this happening and they told me it was because I don't have the latest OS on my MAC. Do to company policy I can't upgrade my OS to the latest version. Adobe send me the link that is not working for two times and need the correct link ASAP.
Can you guys please send me the right link for me to downgrade?
Thank you

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Satellite Pro A300 standby and hibernate functions not working properly

Similar Messages

Maybe you are looking for