Satellite Pro A300D - Error message while watching DVDs

Hi There
I have a problem with my satellite Pro A300-140 running Vista 32-bit OS
Every time I try and watch a DVD I get an error message " Unable to output the video to an external device. Please check the external output setting after ending the application "-I am not trying to connect to anything - I just want to watch a movie !
Any ideas - I did read this was a known problem but I can't re-find the information ?
Thanks

Hi
You should try the new Realtek sound driver from the Realtek page:
http://www.realtek.com.tw/
Furthermore I recommend updating the Toshiba DVD player. It's placed on Toshiba European driver page.
Just one tip; Im using the VLC player. Its free software and very nice
It plays almost all video and audio formats google for VLC player!

Similar Messages

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • How to put MacBook Pro display to sleep while watching DVD on 2nd Display

    Not sure if this is answered elsewhere, but I have a MacBook Pro with a second larger display attached thru DVI. As I watch DVDs on the external display, I would like to darken out the MacBook Pro screen so it is not distracting while watching the movie. I seemingly can't put only the MacBook display to sleep - both displays goto sleep. I can't close the MacBook either. Any suggestions. Thanks.

    Hold the '"Darker" key down until the screen is ghostly.

  • Satellite Pro A300 - error message box: Pwdbank - Abstract Error

    Pro A300 notebook continually popped up error message box: Pwdbank - Abstract Error. Must kill pwdbank process to stop it.
    Does anyone know what's the problem and how to fix it?
    Thanks.

    As far as I know the pwdbank.exe is a part of TrueSuite.
    If you dont use fingerprint or this tool you can disable the automatic loading of this file.
    Otherwise if you need this you should check the Toshiba website for an update:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers

  • Satellite Pro L - Error message when I try to play a music CD

    When I try to play a music CD I get this error message >
    +"The version of this file is not comparable with the version of Windows you're running. Check+
    +your computer's systems information to see whether you need an x86 (32-bit) or x64 (64-bit)+
    +version of the program, and then contact the software publisher."+
    It plays on my old XP 32 bit desktop but will not play on the Windows 7 64 bit laptop.
    The CD is not a commercially made one but it is of importance to me.
    Any ideas please?
    Pete

    When the CD is loaded and I go to play it via computer it shows a dead icon and it is not recognised.
    Usually the icon shows details of the disc to be played but in this case it doesnt, when I right click to choose a player there are none available to choose from.

  • Error Messages While Loading Acrobat 6 Pro

    I get 2 error messages while loading Acrobat 6 Pro.  They began to to appear after downloading, and then removing, trial versions of CS5.5 Suite and CS5.5 Flash.  The error messages are:
    1:- There was an error while loading the plugin SaveasXML.api. The file cannot be found.
    2:- bootstrap.js script error during eval()".
    Trying to uninstall Acrobat 6 Pro so it can be reinstalled fails.
    How can I fix these problems?

    Thank you Bill,
    Yeah, of course you are rigt: my AA is a dinosaur... But somehow - and to be quite honest, I don't know exactly how I managed - I CAN make PDF-files now. (?!) I changed some settings in my printing menu and, well... it worked again.
    Thanx anyway for your time and energy to help me. Appreciated!
    Grtz from the Netherlands,
    Ingrid

  • I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).

    I keep getting the following error message while sharing my iMovie to iDVD.  "Unable to prepare project for publishing"  error (-2125).  I'm running iMovie 09 v. 8.0.6 on a iMac with OSX v 10.6.8, 2Ghz core duo, 1GB 667 Mhz DDR2 SDRAM.  Any ideas why?

    That particular error comes up for a number of reasons, sometimes it's the size of the movie you're trying to export. Bengt Wärleby a longtime contributor to the iMovie Discussion Group has advised a number of people on this error code, so I am going to link to his latest advice he's given to anyone trying to export to DVD from iMovie: Bengt's tips for great DVDs.
    Specifically, try bypassing Share to iDVD by using Share to Media Browser instead.
    In the Share to Media Browser dialog box choose the Large Size.
    When(If?) it gets through that process, quit iMovie altogehter then go to iDVD.
    Create a new project and click on the Media button near the lower right hand side of the Project Window.
    Then click the Movies button in the Browser window just above that.
    Under the iMovie star icon you should see the name of the project you shared out from iMovie.
    Drag that into the project and burn the DVD.
    If it's still to large or you get the same -2125 error code trying to Share using the Medium size instead. But again if you really get stuck consult Bengt Warleby's User tips:
    Bengt's tips for great DVDs

  • Satellite Pro A300D gets to warm and shuts down after short time. HELP!!!

    Hallo together,
    i bought the Satellite Pro A300D notebook 3 weeks ago. Since the beginning I have the problem that the notebook gets to warm and shuts down within an hour!
    I dont run any high performance application and I keep the left side of the notebook free so that the warm air can get away! I already cleaned the heatpipe by using a hoover.
    That couldnt be! I need the notebook for work and thats impossible...
    What can I do? Do I have it to send in?
    For help I am thankfull
    Frank
    Message was edited by: DerVogel

    Hi there DerVogel ,
    Sounds like a Heat related issue ????????
    Whenever it shutdown automatically does it turn on right away ? One symptom of a heat related issue is, it takes about several minutes before you can turn it back on again.
    Here is how you can isolate the issue since it could also be a software related problem.
    1) Turn on the system Tap F2 and boot on the system setup screen ( BIOS )
    2) Just stay on the Bios , If it doest shutdown on the bios then you might need to reinstall windows. or check if system is infected with spyware or a virus.
    But if it does the same thing then the best thing to so is to bring it to a Repair Center or Call Tech support for a depot service repair.
    Cheers ! hope this will help.
    Message was edited by: iSkO

  • Error messages while installing x86 on PIII

    How can I over come that error messages while installing x86 on PIII GA-60XT Socket 370 Processor Motherboard .
    Strange problem . I did not face that problem with previous versions
    of Solaris 10. I used Sun's Download Manager with the same results. I
    used Nero to burn the DVD file : sol-10-u5-ga-x86-dvd.iso.
    Those are the steps I did . Please tell me any errors about it :
    ---Start of steps----------------------------------------
    I entered in the GRUB append -kd instead of cdrom and then reboot :
    Welcom to kmdb
    [0] > cmi_no_init/W1
    cmi_no_init 0 = 0x1
    Error : unable to configrte Network interface.
    Exiting to shell.
    #exit
    nfs mount : nfs file system , use [host:]path
    then I navigate with the installation program :
    Keyboard layout
    language
    hostname
    password
    Error : the disk you inserted is not a Solaris OS CD/DVD.
    F2
    There were problems loading the media from /cdrom
    -----End of steps-----------------------------------
    Thanks

    Are you using a computer Administrator account?

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • Error Message while making PO

    Hi,
    I got a error message while creating PO.
    "No short text maintained in language DE(Please re-maintain material)"
    How to go with this?
    Regards

    Hi,
    check MMR language........
    Or
    use this path
    SPRO-MM-Purachsing- Meassages-Define Texts for Purchase Order
    Here maintaion  text  for Header and item for document item (EKKO,EKPO for ur doc type)and save.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on May 14, 2008 12:22 PM

  • Unable to capture error message while creating an SO using bapi

    Hi,
    Can anybody suggest how to capture the error message while creating a SO using BAPI.
    I have developed a customeized BAPI and using the BDC format to create the SO.
    Note: i am using a call transaction method for the BDC.
    I am sending the message into message1.
    but i am unable to send the same into an internal table
    shyam.

    Hi Shyam
    If my understanding is correct, you are performing BDC process within the customized BAPI...
    And you want to collect the messages from BDC to an internal table and pass to the output.
    Proceed as below:
    1. While calling BDC, use CALL TRANSACTION .... with addition: <b>MESSAGES INTO itab</b>. The structure of itab should be like <b>BDCMSGCOLL</b>.
    2. Now the messages will be collected in ita.
    3. Prepare the messages using FM: <b>FORMAT_MESSAGE</b>
    4. Collect to the returning table.
    Hope this helps...
    Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
    Kind Regards
    Eswar

  • Satellite Pro A300D - What is the model number for the keyboard?

    My husband managed to dislodge a keycap on my keyboard, and broke the white scissor clip that holds hit on...(don't ask me how)
    He spoke to the authorised service centre here in Norway, and they sent us replacement scissor clips (actually they sent an old non-functioning keyboard) but the clips are of a different design to the ones on my laptop.
    I was wondering if anyone has an idea of the model/serial number of the keyboard used in the Satellite Pro A300D-151 (PSAK9E) so I can get the correct replacement part.
    I really don't want to have to replace the whole keyboard when it's just 1 of the scissor clips that is broken...the laptop is only 5 months old.
    Here are some photos of the scissor clip in question & the where it attaches to the keyboard (sorry about the quality)
    Link:[http://img31.imageshack.us/gal.php?g=1000683o.jpg]
    Thanks
    notsure

    Hi
    Sorry buddy but its not possible to exchange some single keys on a keyboard so in this case you must replace the complete keyboard. But normally this should not be so difficult.
    Either you exchange the keyboard yourself or you sent the notebook to the authorized service provider.
    The model number for the keyboard is not known to me but contact your ASP!! They can order all Toshiba parts and they should know the right part number.
    Bye

  • IPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 pr later for iTunes.

    iPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 or later  for iTunes.  Mac iOS version 10.5.8 and iTunes on Mac is 10.6.1. iPad and iPhone version is 6.0(10A403). When I check for updates on the Mac book pro it says software versions are up to date.
    When I check for iTunes version  10.6.3 it looks like it is for snow leopard operating system which I am not on. How to I get my devices to sync with computer. Everything worked prior to iOS 6 upgrade on remote devices.

    I'm having the same problem.
    iPhone 4s won't sync with my Macbook Pro.
    I iust updated the iPhone to iOS6 (thought it wasn't syncing before the update either).
    Macbook Pro running Mac OS 10.5.8
    iTunes 10.6.3 (i.e. latest update - which hasn't had an issues apart from syncing).
    I tried 3 different USB sync cables. Still not syncing.
    Do I really have to update my Mac OS to 10.6.8 in order to sync my phone ? I thought as long as you have iTunes 10.6.3 you're ok...
    Is there a way to update to Mac OS 10.6.8 (or later) without wiping the hard drive and doing a new install?..
    thanks

  • Bypass the error messages while opening the Web Analysis 9.3.1 Report

    I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
    For example:
    user a has the meta-read and read access of @idescendants (east);
    user b has the meta-read and read access of @idescendants (west);
    user c has all the accesses
    However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
    Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
    Thanks

    Karen,
    Thanks for the reply.
    I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
    In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
    In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
    Do you think this multiple level combo boxes can be the cause of this error message?
    Thanks a lot

Maybe you are looking for