Satellite Pro C660-1NQ does not detect WLan network

Hi Guys,
We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
I have checked device manager and the wireless card does not show in here.
I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
Any ideas as to what i can try next?
Cheers,
Ash

Hi
It seems that the notebook would support the Atheros 802.11agn Wlan card.
Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
If its not listed then I recommend installing the WLAN driver which can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads
Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
Hope this helps to detect the Wlan chip!!!

Similar Messages

Hello everyone, I just updated my 3GS from iOS 5.0.0 to 5.0.1 Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network. I tried restarting the phone se

Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search.

Final Cut Pro 10.1 does not detect Promise Pegasus

HI,
I would like to change my location of where events are stored at for FCPX to my Promise Pegasus (6x3TB, configured to RAID 5), which is what i bought it for, but sadly, my FCPX does NOT detect my Pegasus at all in Library. It does however detect other storage devices like when my SD card is plugged in etc, and my macintosh hd.
I spent alot of time reading up and googling and some advices say it must be configured to MAC OS Extended (journaled) which, when i checked, it is! So I don't know what's the problem now.
It is getting very frustrating and I can't seem to get it to work. Would really appreciate if any kind souls can help me out on this!

Did you solved that isue? I have the same problem.
Thanks

Satellite Pro L300-1FN does not boot - hangs at BIOS splash screen

My Satellite pro L300-1FN is refusing to boot up. When switched on the laptop displays the toshiba/insyde H20 BIOS splash screen and the "Press F2 go to Setup Utility, F12 go to boot menu" message and flashes the hard disk access light but does not attempt to continue loading. I have left the bios at the splash screen but it does nothing for many hours on AC or runs the battery flat while on battery.
Is there a way of re-setting the BIOS on this unit? If it were a desktop unit I would remove the CMOS battery to force a BIOS reset but this is impossible on a laptop. The hard disk is fine as I have connected it to another system to remove valuable data.

*I managed to fix this issue* ,,, thanks to some other dudes on other forums
What i did was Format a Floppy disk as MS-DOS boot using a Windows XP PC and USB floppy drive, then downloaded the latest BIOS for my L300-1BW laptop model, copied *.fd bios image to the floppy disk and renamed it to BIOS.fd.
Connect FDD to the toshiba laptop with out AC connected. Held Power button for 12 seconds, connected AC adapter, then held Fn+F, powered on , and kept the Fn+F keys held down for about 10 seconds into the reading of the floppy drive just to be sure, then let go. The screen was black throughout the process. I left this for a few minutes, or until it had finished, the laptop rebooted itself, and voila, it now goes passed the TOSHIBA POST logo screen :)
I hope this helps others with Toshiba Laptops. should work for any Toshiba laptop.

MacBook pro does not detected wireless network?????

Hi! I have an airport express that provides the wireless network for the house. My iMac and iBook as well as iphone have no problem detecting the network. But the network does not show up in the drop down list that shows up when I turn the airport on. When I click on "other" and type in the information that way, the connection times out.
Any suggestions would be appreciated!
Thx!

I have a similar problem. When I set the network to not be closed, My MacBook Pro finds and connects when I return from being away. When I set the network to be "closed", it will not connect automatically (I have checked "Remember and network this computer has joined" & "Remember this Network ") it will not join automatically. However, when I enter the name and password, it connects and all is well. My iPhone will automatically connect regardless of the "closed" being checked or not. Any suggestions? I would prefer to retain the "closed" setting for extra security.
Thanks,
Bruce

Satellite Pro A100-080 does not boot - stays dark after 3 beeps

Hello,
after one week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my children does not boot anymore.
When powering on the system, it *beeps 3 times* (one longer, two short beeps), then the HDisk light shortly blinks "blue" and then nothing more happens. A/C, Power and Batterie LEDs are "blue", which seem to be the OK state.
No other useful help, as the display stays dark.
We had upgraded to 4 GB MEM (Kingston) one year ago and I already tried the former used 1 GB (included when purchased) or the 2 x 1 GB replacement from December 2007, but same status with those modules. So it is not
a defect memory.
I hope it is not the mainboard, probably only the included NVIDIA GeForce Go 7600 graphics adapter?
Does anyone have an idea, what might be the issue?
Thx for a short help.

Hello
Generally speaking this kind of beep codes are hardware related or with other words hardware is malfunctioning. So I think its a hardware problem and an ASP should check your notebook to identify the reason of this.
On the Toshiba website you will find a list of ASPs:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Satellite Pro L300 - Windows does not boot up

Silly person that i am, and being computer illiterate i turned off my laptop while it was downloading updates.
Now, when i turn it on it gives a black screen with 2 options for startup.
1 for start in repair/restore mode,
1 for start windows normally but neither work.
I made the recovery discs after i purchased the laptop but i am wary about using it.
Though i dont do a lot of work that needs backing up, i only surf the net and do emails.
Are there any other safer options for starting up?

Hi
If you have no important data on the HDD then you can use the Recovery disk in order to reinstall the OS again and to set up the unit back to factory settings.
The recovery disk will format the HDD and will erase everything from the HDD.
The installation procedure does not take a long time you need to boot from Recovery disk and have to follow the instruction on the screen. Thats all!
Greets

Satellite Pro 440 CDT does not power up

Hi, I have an old 440 CDT which does not power up. Anyone any ideas???
AC is connected, power light is on, green. Battery is dead (as in buried). When I press the power button, the following happens:
- On light is green
- Num lock key (the one with the "A" on it) flashes 3 times: long-short-short
- HDD light flashes on 1 time, green
- CD light flashes on 1 time, orange
- Popping sound in the speakers
Then it turns off again, with the power light burning green constantly.
Nothing happens on the display (tried FN F5). I also switched CD/floppy, attached both, with or without battery, no help.
I am puzzled, please help!
thx, Eric

Hello Eric
Like you know, on this way it is not possible to give any precise diagnostic, just speculate what the problem can be. In my opinion it is definitely because of defective electronic on board but what exactly it is not easy to say. Try to contact someone who has experience with notebook repair procedure.

Airport does not detect wireless network; it says problem = [network]"connection timeout"

It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

Wifi Does Not detect my network but does others

Hi there,
I managed to get great responses last time I had an issue and now I'm back.
Here's the issue and I will also say what I've tried so far to fix it.
ISSUE
On-and-off my laptop cannot detect (and hence join) my own Wi-Fi network, even when right next to the router. My neighbours' networks are all visible.
This issue is not consistent and is sporadic.
It is not a hardware issue - I'm currently (reluctantly) logged into my Windows partition and am happily using my Wi-Fi connection through that.
It's not a router issue as
a) It's a new router
b) I can connect through Windows (as can my wife on her netbook)
c) My iPod Touch connects no problem.
My network is not a hidden network, it is fully visible. It is, of course, a secured network and no-one but me knows the password to the admin panel of the network.
_WHAT I'VE TRIED_
a) Restarting the computer doesn't fix it
b) Removing the connection settings from 'Networks' and restarting it doesn't fix it
c) Deleting the system preferences list from Library|SystemConfig|Preferences doesn't fit it.
d) Turning the router off for a while and then back on doesn't fix it.
e) I've just done a DiskWarrior check and that didn't fix it.
I have also done a complete reinstall of Leopard and then restored my files etc from my external hard drive (configured to use Time Machine).
I don't know whether I've covered everything, but it's certainly a start.
A couple of weird things - sometimes leaving it overnight means it re-finds my network - but no explanations. And the fact that this issue is inconsistent.
Please help, as I really am getting tired of it (I've tried working around it for a couple of weeks now) and am out of ideas.
Many thanks in advance,
Martin

Hi Martin,
It sounds to me like an IP address problem.
Under "Applications" go to "System preferences", then under "Internet & Network" select "Network" Select the kind of network you want to connect to, go to advanced under "TCP/IP" It should say "Using DHCP"
Write down the IP address.
Try renewing the DHCP lease. Then try connecting to the network.
If that doesn't work, find a computer that can connect to the internet and check the IP address of that computer the first three sets of numbers should match the IP address you wrote down, if they don't normally I would have to tell you to go through terminal and find an unused IP address to select, but considering you probably are never going to access the network through both parts of the partition at the same time, you can safely use the IP address that Windows has. How to get that IP Address I can't really help you with though...
Once you pull the IP address that the windows side is using go back to the advanced settings page and select "use DHCP with manual IP address" in the space for IP address enter said IP address, and click apply. And hopefully you will be having a grand ol' time on the web.

My Satellite A60 does not detect WLAN

Hello,
I just bought a SA 60 128 used laptop. I checked in many ways whether this system has inbuilt wireless connection. I tried to search this model over the internet to get the configuration but I couldnt. Now I am using a USB adapter to connct to the wireless network.
Please help me with this.

@razan
Why you search in the net for the information if the notebook has WLan card installed or not. Check simply the device manger and you will see if the WLan card appears or not.
Anyway, the USB Wlan stick is no a bad solution.

HT1386 macbook pro os x does not detect my iphone

Please help me with syncing my iphone 4s to my macbook pro os x 10.4.11

You will need to update OS X. Syncing the 4S requires Mac: OS X v10.5.8 or later and iTunes 10.5 or later.

AirPort does not detect networks, unless another network connection is made

I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists.
AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or to another Mac via Firewire to use network sharing, it can update and load web pages as normal. A strange quirk I've noticed though, whenever connecting with ethernet or firewire, AirPort will suddenly detect the network! It still can't quite connect to WiFi properly though. While still connected through firewire or ethernet, it will have no connectivity through a self-assigned IP. If it is disconnected from ethernet and firewire again, the wireless network will still show up in a re-scan for networks but it will fail to connect.
I've opened the computer up to ensure that the airport extreme card is seated properly as well, and that the antenna cable is secured properly.
Any ideas as to what the issue is? Should I look into replacing the AirPort Extreme card?

Got no answer on my original post, so I went ahead with ordering a replacement AirPort card on eBay (item #130487488014). Once installed, the iMac was able to detect and connect to networks normally... but was still unable to load any web pages. I tried on secured and unsecured networks as I did previously, and plugging directly into the router and into my Macbook Pro via firewire, with the same results as before. Safari loads pages when connected with an ethernet or firewire cable, but will not load pages on WiFi alone. I can attempt to access a router setup page via WiFi, and am prompted for a username/password, but the page itself never manages to load.
Any clues as to what may be going on here?!

Can't install Win 8 - Satellite Pro C660 does not detect HDD

Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno Moreira

Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out.

Satellite Pro C660-1NQ does not detect WLan network

Similar Messages

Maybe you are looking for