Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Similar Messages

Ipad apps wont work after downloading update 5.1.1

My I pad apps wont work after I downloaded OS update 5.1.1
I have tried restoring, but it doesn't solve the problem.

Hi
I had the same problem since I updated, the iPad shows "No Sim" I have taken it out, put it back in after cleaning it! All the usual possible solutions that everyone else has tried? So I have not been able to connect for over a week now and I intended to pop into the Apple geek guys to let them have a look, but was scared that they might suggest it would have to be sent away!!! What would I do?. So last night I was fiddling around with the IPad and thought I would try something, AND GUESS WHAT! It works!!!!
This is what I had done
1. Take the SIM out of the IPad
2. Leaving the SIM out, turn the Ipad off using the Home and power button at the same time, do this 4 times
3. Now insert the SIM back in it then found my SIM
I cannot confirm the is the ultimate cure, but it worked for me and I have tried all the other possible solutions, it's worth a try?
Barlow2012

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

Satellite A200: Some devices stoped working after BIOS update

I recently updated my BIOS to V2.60 on my Sat A200
but ever since i apdated the BIOS some of the hardware components stoped working.
So i decided to use the product recovery CD but it wont work anymore.
Each time during its loading stage the system crashes and i get a blue screen mentioning a file called CLFS.SYS as the root of the problem
Is there a solution for my problem?

Hi
What Sat A200-xxx do you have exactly?
From my experience there are different BIOS versions for different operating system.
The Vista and XP needs different BIOS!
But I wonder why the Toshiba recovery disk does not function anymore? ?:|
Usually you should be able to recover the system no matte what BIOS has been installed.
Did you try to format the HDD firstly using another disk for example like Win XP?
Check this!
I think you should format the HDD again and then should try to recover the notebook using the Recovery disk

Satellite Pro L40 wont boot after changing BIOS settings

Alright changed a few settings in the bios last night and now when I boot I get a black screen lights flash and that hard drive light comes on but nothing on screen.
There was no password on bios,... how would I reset BIOS to normal?
I put a windows disk on I can hear the disk spinning but nothing on the screen
(I think I have come to the right place on the forum)
Its a Toshiba Satellite Pro L40 model psl4be.
Thanks

>There was no password on bios,... how would I reset BIOS to normal?
You can set the BIOS to default ONLY inside the BIOS so you have to access the BIOS pressing F2 or at the beginning of the booting order
But I doubt that this problem is related to the BIOS.
Maybe its just a simple bad luck that this issue happened just exactly after changing something in BIOS.
Try to connect an external monitor and check if you can see something on 2nd display.

Re: Satellite Pro A300-1EA - Difficulties in BIOS update

Hi there,
I attempted to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN) as prompted by Tempro, from version 1.50 to 1.90. The system froze completely during BIOS flash, after waiting for 1 hr, I decided to turn off the power and pray for the best. Thank heavens, everything still works, but the BIOS is still v1.50, not been updated. I have now read so many posts on the forum regarding blotched BIOS update and am now very cautious regarding undergoing any BIOS updates at all.
My questions are: Are there any issues regarding this particular update and/or with the InsydeFlash facility? Are BIOS updates all generally so tricky that they best be avoided? What are the alternative ways to update BIOS, hopefully less dangerous? Also, could there be any potential damage to my laptop related to this miscarried BIOS flash that I should be aware of?
Many thanks indeed!
Monsteress

You can feel you lucky, buddy! :)
Im surprised that your ROM module is not damaged or something else. In most cases this happens if the computer freezes during the update.
Let me give you a word of advice. You should only update the BIOS if its necessary or you have problems/issues with the notebook. You can ignore the messages from TEMPRO if your system runs properly. For example I never update the BIOS if my notebook runs perfect Never touch a running system ;)
Otherwise follow the tips posted by Akuma Before you update the BIOS close all running programs, disable AntiVirus and Firewall and connect the AC/DC adaptor.
On my Satellite U400 I have updated the BIOS without problems.

Satellite A660 - USB boot problems after BIOS update

Hello,
I own a Toshiba Satellite A660 and recently have update the BIOS to the latest version (1.80). Since then the notebook will freeze on the boot screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
It works without the flash memory connected and also if I connect it after I enter the boot menu or the BIOS setup. I can even boot from it like this.
As far as I am concerned this is a serious regression. Is there any way I can downgrade the BIOS version, or any other way to fix this issue ? I rely heavily on external USB drives.
Regards,
Claudiu.

I too am having problems with my A660 since upgrading to 1.80 bios - the HDD/SD utility, the pc health monitor and half the other toshiba utilities no longer work because they can't recognize the bios and actually tell me this... I get an error message telling me ''can't get bios type''...
On top of this I get the boot problem as well - I have to unplug half of my USB devices to get the laptop to boot properly...
And now - one month into owning my new A660 - after a hard drive failure, a problem with the Broadcom internal wireless adaptor I now have the internal TV tuner no longer working and have no idea how to fix it...
My gut feeling is that the sooner I can downgrade to the original factory bios the BETTER - and wait for another bios update to come along that is not faulty/buggy...
HOPE someone can help me with this...
John.

Satellite A50 doesn't function after BIOS update

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
I have tried suggestions in following link
http://askiris.toshiba.com/ToshibaSu...200%2035586212
However, this did not work.
However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.
2. Point me to links where I can find the files in the above link.
Many Thanks in advance.
Best Regards,
Parag

> 1. How can I perform the BIOS update to get my PC running back.
Not possible if your BIOS ROM module was wrong flashed.
If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
> 2. Point me to links where I can find the files in the above link.
There is no link! You will have to ask the ASP for the help.
Bye

[Solved] Mouse and Keyboard Dont Work After BIOS Update

I spent the last few hours in windows 7 trying to prove to the guys over at MSFN that my problem wasn't driver or bios related by updating to the latest drivers and upgrading my bios to the most recent version. After I was finished I decided to boot back into arch to work some more on my custom kernel (since oddly it had the same problem before the bios update, the mouse and keyboard worked on one boot but once i rebooted into it again they no longer worked) and found that the keyboard and mouse no longer worked, thinking I had rebooted into the custom kernel by accident I rebooted and selected the default kernel once again only to find that the mouse and keyboard still didn't work.
Any ideas on how to fix this? I really don't want to reinstall since I just installed it last night.
Edit: Another silly mistake, i had renamed the original xorg.conf and never put back when I was finished. This makes me wonder why KDM even started up at all though.
Last edited by brando56894 (2010-01-08 08:04:21)

Hello base76, welcome to the HP Forums.
It appears that the mouse and keyboard aren't working correctly. I will try to assist you with this.
To start could you please provide the following:
Model and product numbers for you notebook.
Currently install operating system.
Were these working previously? If yes, were any changes made prior to them not working?
Have you attempted any troubleshooting? If yes, what have you tried so far?
I look forward to your reply.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Macbook pro doesn't work after EFI update.

My new macbook pro doesn't work. I bought it yesterday and after I've installed EFI update (it installed without any errors) my mac
"starts" with blank screen, no chime sound, with fans on (I guess - it's full speed). I've already tried those tricks with command+option+p+r and it neither work nor bring my mac to "life". Any ideas what this issue could be?

I've got the same problem but with QT player (not PRO version)
I've installed the 7.1.2 update for quicktime and the audio and videos files on the net doesn't start I've got a "?" then I go to the quicktime prefs and I see that the entire QT plugins disapear
Besides the audio files and the video files on my HD work
so ,is someone can help me for finding the whole QT plugins ?
If it was impossible ,I suggest you to make a 7.0.4 reinstaller for 7.1.2 for Quicktime

Lenovo G780 not working after BIOS update

First of all I want to say that I am extremely disappointed with the experience I had with my Lenovo. After I bought it I found out that Lenovo, for some reason, disabled the Turbo Boost option of the CPU. I tried to fix it by entering the BIOS but the options there were limited, so I decided to update the BIOS. I downloaded the BIOS update for 64-bit windows(i am running windows 8 which is compatible with the said update utillity). I ran the .exe and followed all the instructions (did not shut-down restart or anything my computer). After installing it automatically restarted and a Lenovo logo prompted on the screen followed by ">>Start PXE over IPv6, Press [ESC] to EXIT..." after that "EFI Network 0 for IPv6(numbers and letters) boot failed". Then ">>Start PXE over IPv4" which failed and a blue box poped saying
"Default Boot Device Missing or Boot Failed. Insert Recovery Media and Hit any ket then select boot manager to choose a new boot device or to boot recovery media". Pressed ok and got me to Boot Manager screen. Boot option Menu had only EFI Network 0 for IPv6 and EFI Network 0 for IPv4". What should I do?
Note that I tried to start up both with and without the ethernet cable in.

Hi.
I also (stupidly) updated to this new BIOS version and ran into the problems you described. I did what Lenovo recommended but nothing worked. But this how I solved my problem:
Enter the BIOS by pressing F2 just after booting up the computer.
When inside BIOS go to Boot and chang the following settings: Boot Mode [Legacy Support] AND Boot Priority [Legacy first].
Save and Exit and your computer should start.
Whence inside check if windows is activitated and check if the new BIOS is registered.
PS: I have scandivian G780 with an i3. Pls responds if this helps

Pavilion g6t wont boot after bios update now just black screen please help!

I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

@Fuschia4me,
1.       You will have to use another computer
2.       Access the HP.com site with the BIOS updates available here is the link
3.       You want to select the F.36 BIOS version
4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5.       Once done insert the flash drive into your laptop
6.       Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Laptop wont boot after BIOS update

Hello
i have a compaq CQ61-303SV laptop
i tried to update the BIOS and i download the file form the hp driver and support website
after i update the BIOS the laptop wont to boot and stop on a black screen
what to do please ...

Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

Why won't air print wont work after ios6 update on iphone?

It was working before I updated....my printer is KodakEPS2170

I had the same issue. BTW, that troubleshooting assistant is worthless. I did 2 things to get it working. I'm not sure if one or the other fixed it or it was combination of both. I had the "No Air Printers Found" and did the usual rebooting everything, firmware updates, etc. I could print and scan from the epson app fine. I downloaded the epson airprint app from the app store (It's called Epson Printer Finder) and verified my settings under the Airprint section and choose to save the settings. I didn't change anything, just looked at the settings. I also setup the epson connect feature on the printer. After I did both of those I went into mail and tried to print an email message and all of a sudden I could see my printer. It's worked perfect since then. I hope this helps someone.

Satellite Pro C850 wont work after Bios update

Similar Messages

Maybe you are looking for