Satellite Pro L20: How to intsall the Office applications from recovery CD?

I have just received my new laptop and I am supposed to have XP Pro when all is on my laptop is Microsoft Note.
It does state that XP Pro is loaded but I cannot find outlook, word, p/point, excel etc all the applications that come with XPpro.
Can anyone tell me how I load them on from my laptop? The only disk i received from Tosh is a recovery disk which does not have any mention of XP or XP pro only MS OneNote
HELP would be greatly appreciated.
Regards
PT

Hello
The applications that you want to have are definitely not a part of WXP operating system. They are part of Microsoft OFFICE application package. It must be separately installed and it is not a part of Toshiba software.
Please clarify this with your local dealer.
Bye

Similar Messages

  • Satellite Pro P300 - How to obtain the factory image without media?

    Hello
    I have been given a Satellite Pro P300 and it has the recovery disc for win xp, I would like to go back to the pre installed Vista intallation if possible.
    The recover partition on the hard drive isnt available so i assume it cant be recovered. Is it possible to purchase a factory image?

    Liam is right Win 7 is better than Vista OS.
    So if you have a possibility to install Win 7 I recommend doing this instead of Vista.
    However, the Toshiba recovery disk contain just Vista OS.

  • How to transport the webdynpro applications from development production

    Hi Experts,
    We are implementing the first time NWDI for development.
    As per my knowledge . There will only NWDI available for the whole landscape to manage and track the information.
    NWDI will only one for the whole landscape?
    How do we need to transport the ;build application from the dev sytem to production through NWDI.?
    How the transport life cycle will be managed with NWDI and with out using NWDI?
    As of my knowledge . we need to specify the production or testing mechine information in the NWDI to transport the build file from deve to -> testing to -> production.
    Because my clients not allowing to specify the the production system information in nwdi to transport from dev to prodution using nwdi?
    what is the other solution available?
    By giving the production information in NWDI will give any problems futher?(like security).
    Regards
    Vijay

    HI,
    NWDI is Simply used to manage life cycle.
    A developer will develope application. that time he needs to create an activity.
    1. when activity is checked in & activated -> code is sent to DTR in development space, and CBS builds that code and its .sda or .ear file is deplopyed on development server.
    2. same when you release it -> code is sent to DTR in Consolidation space  and CBS builds and deploy it on consolidation server.
    3. after that you can assemble you whole development in single file i.e. .sca file, and its get deployed on test server.
    simple..
    and if your client dont want to specify production system in NWDI., then when you assemble an .SCA file of your development, just copy it from CMS folder of your NWDI installed drive. and send it to your client..
    he will externally deploy it on production

  • How to view the PCUI application  from CRM system

    Hi
    I am new to CRM  can anyone tell me how to open the PCUI application in CRM system  .what is the transaction code to view the PCUI application for the lead and opportunity transactions. cany anyone tell me step by step process to view.
    regards
    Rohit

    HI
    The People centic user interface is the user interface layer where the end user process the crm transactions etc.
    go to SE 80 transaction and select the application as BSP application becouse pcui is bsp based views. type crm_bsp_frame under the application field and you will get folders select the select.htm folder and right click on the mouse and click on test then you will get the popup window enter the crm system user id and password you will get the pcui floor plan for entire crm applications in the browser select the lead and opportunity transaction floor plan click on the new floor plan option. then the new popup window will open and finally you will see the lead transaction or opportunity transaction pcui view to work on . these pcui views url will inturn you can assign to the enterprise portal to log on to single sign on to EP and access the pcui application for crm marketing sales and service module areas as well along with the contact and account mangement for business partners creation screen.
    please do reward points if helpful
    Dinaker vikas

  • How to trace the wdy application from Portal link?

    Hi
    I have a  req to work with a application,which show the salary slip,through ESS portal,but I am not able to trace out the webdynpro application,is is running behing this?
    can any oe pls tell how to trace out the application,if worked any time.
    secondly req is to insert the logo in the salary slip,when we clk in the SALARY button,its display the slip as PDF,please tell how this PDF is attached inside the application,as if its a Z smart form,than i can insert the logo in it & can reinsert in the webdynpor application,as I think its a case of z smrtform which is called or linked on webdynpro.
    pls tell how to trace the standard application or the smart form.
    regds

    Hi Vipin,
    You can get the webdynpro application name from the portal link or you can ask portal team to get you the webdynpro
    application name from the portal iView of salary slip application.
    After that go to SICF tcode.
    Search for the application name by entering the application name against the field SERVICE NAME and press F8 (execute).
    The system will find you the SICF service for that webdynpro application. Select that service from the list.
    Now click on menu GOTO->OBJECT DIRECTORY ENTRY and get the package name from the popup window.
    Go to tcode SE80 and open that package.
    Expand node Web dynpro->Web Dynpro Applicat.  and find the application there.
    Double click on the application.
    Get the web dynpro component from the application parameter.
    Open the Web Dynpro component in se80 and do the changes as required.
    Regards,
    Vikrant

  • Satellite Pro A120: How to remove the CD/DVD drive

    I have 2 main problems and can't seems to fully open case.
    Does anyone know how to remove the dvd-rom?
    But my mainproblem is the power swith ribbon (blue) has come loose from the motherboard. But as i can't fully open the case im using tweezers to try to recconect it.
    Doesn't seem to want to go in.
    Is there a clip on the motherboard connector or is it just push in? A photo or diagram would be useful.
    Any help would be appreciated.
    thanks

    One question; why do you do this?
    I mean why your want to open the notebook?
    Fact is that the Pro A120 Satellite is not a old notebook and I presume the warranty is valid.
    If you remove the notebook covers you will lose the warranty!!!
    The CD/DVD removing is very easy.
    Usually it is secured with one screw which can be found at the bottom of the unit. You have to remove it firstly and then it should be able to take off the ODD.

  • Satellite Pro 4260: How to remove the DVD drive?

    I have a Satellite Pro 4260 and it appears that the DVD drive is broken and I want to replace it. I cannot figure out how to remove the old one.
    Does anyone know how? Is there a manual available showing how?
    Thanks

    Hi
    This notebook is not know to me but a checked some sites in the net and it seems that the top cover must be removed.
    Then lift up the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD board from PJ15 on the system board.
    Remove two screws securing the CD-ROM/DVD-ROM connector board.
    Separate the CD-ROM/DVD-ROM connector board and CD-ROM/DVD-ROM connector brace from the CD-ROM/DVD-ROM drive
    Well, I think its not easy for someone with no experience.
    Therefore if you dont know how to do it and you have no much experience you should ask someone how knows what to do ;)

  • Satellite Pro M40 - How to wipe the system to new

    I am having a lot of trouble with my Satellite Pro M40.
    When wanting to click in to the various files an error message comes up and asks me to send an error report. I think i may need to wipe the system to new. Does anyone know how to do this? I dont have the disks that I orgianlly got with the laptop to do this.
    Thanks :D

    As you know to open various files you need to use various software. So it will be interesting to know which kind of files you try to open. If you know exactly which software can not be started I recommend you to reinstall it in hope it will work again.
    Please think about it at first. If you still want to make clean operating system installation please write again. We will find a way to help you. ;)
    Bye

  • Satellite Pro M30 - how to recover the data?

    I get a disk read error when I try to boot my Sat Pro M30 running XP Pro, just after the In Touch with Toshiba screen.
    Using the Revovery DVD that came with the computer when purchased and entering advanced mode I'm trying to use check local Image File. It doesn't seem to find any Image file. Is it possible to recover or rebuild image file?
    There are some data I would like to recover from the HD so I'm trying to avoid reinstalling the system until I've recovered the files.
    Have tried to read from the HD using a cabinette and a new NP running Vista but it didn't work. Is there a general problem reading a XP HD from VISTA?
    Any suggestions how to recover the data would be very much appreciated!
    Johan

    cabinette ? Do you mean "USB Hard Disk Caddy" ?
    To recover your data, you can connect the HDD using a USB Adapter to another PC running XP or Vista. The drive should show up as a Drive letter (such as E: Drive), and you will be able to copy the files.
    When you say "but it didn't work", what was the problem exactly?

  • How to access the MDX application from SQL server when working with OBIEE?

    Hi,
    I am new to MS SQL Server 2005. We have developed the OLAP Cubes on SQL Server Business Intelligence Development Studio with its integration with Oracle Business Intelligence Enterprise Edition (OBIEE).
    The backend query is in MDX language. Now if I need to run that query I need to access the MDX Application, rite?
    So need to know how to connect to MDX application.
    Regards,

    Administration Tool: File - Import - "from multidimensional". There you choose "Provider Type" = "Analysis Server 2005". You specify the URL, user name and password. Then you can import MSAS cubes just like Essbase ones.
    Cheers

  • How to access the MDX application from SQL server?

    Hi,
    I am new to MS SQL Server 2005. We have developed the OLAP Cubes on SQL Server Business Intelligence Development Studio with its integration with Oracle Business Intelligence Enterprise Edition (OBIEE).
    The backend query is in MDX language. Now if I need to run that query I need to access the MDX Application, rite?
    So need to know how to connect to MDX application.
    Regards,

    I think that you have posted this query to the wrong forum. Try this one:
    Business Intelligence Suite Enterprise Edition
    --Andy                                                                                                                                                                                                                                                                                           

  • How to remove the open applications from right side of the dock?

    How do I remove the open apps from the right of the line on the dock? They are by the Trash. I will attach an image. I don't want them to show up over there when I have an app open.

    In previous versions of Mac OS X, any window containing an open application that was reduced in size was put in the Dock and looked like those in the image. So if you reduced any open page while in an application, that would be as you see, there. Or if you chose to 'hide' an open application it'd go there.
    You should be able to click once on each of those and have the full page restored in the screen. If there is anything on those pages you want to save, do so and the file would be saved in your Documents or other folder of your choosing.
    Good luck & happy computing!

  • Satellite Pro 4290: How to solve the IDE #1 error issue

    I have recently aquired a DVD-ROM drive to upgrade my Sat Pro 4290 optical drive from a CD-ROM to DVD-ROM. As suspected I am having the problem that the drive is not recognised and get the IDE #1 error.
    I can get windows XP to recognise the drive by deleting the Secondary IDE Channel in the Hardware and then searching for new new hardware. It then installs the IDE Channel and then finds and installs the DVD-ROM and works fine. I reboot the laptop and back to square one!
    I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on theh IDE connectors.
    I do not want to risk this and was wondering if anybody found an easier way of doing this?
    Many Thanks

    Hi
    > I understand it is something to do with the settings on the motherboard and somebody has resolved this by soldering pins to different places on the IDE connectors.
    Thats not 100% true. This is not a setting issue on the motherboard but the setting of the CD/DVD drive.
    The drive supports different master\slave\c-sel settings and if they are not compatible the BIOS will not recognize the drive correctly.
    On the external drives (for desktop PC) its possible to change such settings by switching the jumper but this is not possible to the slim notebooks drives.
    The notebook drives settings are stored in the firmware!!
    I found different not legal tools which can change the master/slave/c-sel settings but I would not recommend using it.
    The risks are too high that the drive will be damage.
    So try to replace the drive with a compatible one

  • Satellite A70-S249: How to change the video memory from 64 to 128MB

    ai all
    i have a A70-S249
    in user guide it say that i can adujst tha vedio memory
    64MB ATI MOBILITY Radeon IGB 9000\9100 to 128MB
    but thy didn't say how can i do it.
    so can any one tell me how to do it?
    (my bios is phonex 1.5)
    thanx

    You should use the Toshiba graphic drivers.
    The different drivers you can use at the own risk.
    The Toshiba driver supports an overheating protection. You should know that the notebook graphic cards are not the same like on the desktop PCs. There have no own cooling module. In this case the Toshiba graphic driver controls the performance of the card and decreases the performance if the temperature increases to the critical level.

  • Satellite Pro L20 - Is MS Office is on the recovery disc

    Hi,
    This is my first time on this forum and I have limited technical knowledge - please be gentle!!
    I have a Satellite Pro L20 laptop which is now 4 years old (I got it in Nov 2005).
    It has been running extremely slowly over the past year so I removed any software that I no longer use, have backed up any files that I needed to keep and defragmented the hard drive.
    I haven't really noticed any difference in the speed, I understand that I can now try to format the hard drive and reinstall windows using the Product Recovery disc.
    When I first had the laptop, all I needed to do was press the power button, enter in a couple of passwords and a computer name and it all very nicely loaded with Office 2003 waiting there for me to use!
    Could anyone tell me if Office is on the recovery disc?
    It says that One Note 2003 is there and I have a code for that, but doesn't mention Word, Excel, Publisher or PowerPoint - these I use daily.
    I've looked on the Additional Software disc that also came with the laptop and it doesn't seem to be on there.
    Your help will be very much appreciated.
    Thanks.

    Hello
    As Jimi said Microsoft Office is not preinstalled on Toshiba notebooks. Maybe its a trial version but not the full version and One Note 2003 is not the same as Office 2003.
    Dont forget that the product key on the bottom side of the notebook belongs to the Windows version and its not for Office because sometimes I can read here that people try to use this key with Office. ;)
    Greets

Maybe you are looking for