Satellite Pro L300 1AD Can't install display driver on Windows XP

I just installed XP on my Satellite pro because my internet modem doesnt work with Vista.
I went on the main Toshiba website to install the display drivers but they wont install, it keeps bringing up the message "this driver is not for this computer please contact manufacturer".
I dont understand why because all the other drivers I downloaded off the same page work, its just the display one. Does anyone know whats wrong?

Have you downloaded the newest driver for Satellite Pro L300?
On the Toshiba website its version 6.14.10.4953.
Alternative you can try the drivers from Intel but normally the Toshiba driver should work.
I always use the Toshiba driver and never had problems.
By the way, I looked on this Toshiba website:
http://eu.computers.toshiba-europe.com

Similar Messages

Satellite C50-B-13D - Can not install display driver

Hello,
I have a notebook Toshiba Satellite C50-B-13D. I had to reinstall my Windows 7 Professional 32 Bit OS. Now i have a problem with the drivers. For example i can not install the display driver. After i give permission to make changes on my computer the Error message "This computer does not meet the minimum requierments to install this software. Does anybody know what i can do?

Originally Posted by TomDexter
As I’m not mistaken the Satellite C50-B-13D does not contain dedicated GPU but the notebook was equipped with the Intel Celeron N2830 CPU which support the Intel HD Graphics 4000
So you need to install the Intel HD 4000 display driver.
Usually you have two possibilities to install the driver.
You can execute the installation.exe (setup.exe) file or you will install the driver within the device manager. I recommend you to choose the 2nd option in case the standard procedure does functions.
The driver from Toshiba EU driver page has to be unzipped.
Within the display-20140528122046 folder you would find the TC40214900E.exe
This is an zipped folder. Click right on this file and choose “unzip here”.
Now you will get another TC40214900E folder where you would find all the driver files (dll).
Next step: go to device manager, choose graphic card and click update/install driver
Now choose the “Advanced” installation option and point to the unzipped driver folder.
The system will pick up the files automatically and you could finish the installation.
That’s it.
Hello
I have same problem and can i use mentioned driver "TC40214900E.exe"? my notebooks model is satellite C55-B5201

Satellite A100 (PSAA9E) - Can't install display driver for Windows 7

I have a problem with installing official Toshiba Windows 7 x32 ATI x1600 driver.
After unpacking it should install.exe be executed, I believe, but it's not; nothing happens. Going to Setup.exe with manual install, then I don't see Catalyst Control Center & Display Driver in the list, just Catalyst install Manager & vcredist. After installation these components (CCC & DD) are not present.
Any ideas?
P.S. Same problem with official Toshiba Vista32 ATI x1600 driver.

Hi mate,
Have you already installed other drivers for the notebook? I mean the chipset driver, this driver must be installed first.
And are you sure that you have ATI display driver? Some Satellite A100 models were delivered with nVidia graphic card as far as I know.
By the way, what happens if you install the driver manual in device manager via advanced installation?

Tecra 8200: I can't install Wlan driver for Windows XP

Hello ,
i can't find wireless driver for windows xp. I have Tecra 8200. I try to install a lot of drivers of the official page of Toshiba for Tecra 8200 but the drivers do not work.
If anyone know how i can install wireless in my tecra 8200, please let me know.

Hi
Firstly what I want say is the Tecra 8200 was not delivered with Windows XP and you will not find any Wlan drivers for WinXP on the Toshiba website.
I have checked it and there are only drivers for W2k, NT, and W98SE.
But as far as I know the unit was delivered with the ORiNOCO specification Wlan miniPCI Card Wireless LAN standard: 802.11b
In this case I would recommend searching in the net for such drivers.
Unfortunately, this is all what I can suggest.

Satellite M70-CLI - Can't install display driver or SM Bus Controller

Hello,
I have a Satellite M70-cli PSM73C-CL100E and I got a new hard drive and loaded Windows xp. I went to the Toshiba website and downloaded and installed all of the drivers. I didn't have any problems with the atheros wifi drivers, or sound, modem or chipset. I also updated the bios to v2.10 all with success.
The problem is with the video card. I used the program from huntersoft and know that the chipset is an ATI. Also it said its a ATIradeon xpress 200m with 128MB DDR shared video. When I try and install the ATI driver it says setup was unable to complete the installation. Try to setup your display adapter with a standard vga driver.
I have spent hours pouring over the net. I have tried the ATI L30 XP driver and it does the same thing. I have tried the ATI radeon xpress 200m driver and it says hardware not found. I don't have the original CD's. I know that it works as the old drive worked fine. Unfortunatly I wiped it as well to put in an older laptop. I should have got the drivers off of it. :(
Does any one have any idea? This is driving me crazy! Thanks for any help. Marilyn

I guess I should have been more specific.
I always install the chipset first and then the display driver.
I did only use the toshiba driver. If you read the post I said that it comes up with an error message that setup was unable to complete the installation and try to setup you display adapter with a standard vga driver.
I did install sp3 first before the drivers. I also updated the bios ( after I had trouble). I tried 3 times with the toshiba driver and then tried the ati xpress 200m.
The installation on that driver halts with a no video hardware found for this driver.
The only thing I can think of is that somehow the video card has become damaged. It doesn't make sense as it was working perftecly before the hard drive upgrade.
I am trying to get this laptop ready for a donation. I volunteer as a tech for a computer company.
We donate laptops and computers to people in need of help looking for jobs,ect.
Thanks for any help. Worse case senario is that I give them the laptop any way. It still works, just not that great of display.
Marilyn

Satellite A300 - Can't install display driver

So I formatted my laptop (A300 PSAGCA-0C301N) two nights ago, and being the idiot I am I forgot to download and backup the necessary drivers for my laptop.
So when I first started the laptop on a fresh installation of Windows Vista 32-bit on a freshly formatted HDD, my resolution was 1024x768. However, the full standard resolution for this laptop is actually 1280x768 along those lines, however when I went to "Personalize" the max resolution I was allowed to have was 1024x768.
So I went to this site http://www.mytoshiba.com.au/support/...download?os=15 and downloaded the Wireless Lan/Wired Lan drivers, the Intel Chipset drivers, the Audio Driver and ATI M82XT,M86 Display Driver.
However, once I downloaded and began to install the ATi driver, I got three error messages right after extraction; the first box saying:"Catalyst Install Manager failed to initialize Detection Manager"
Right after the first box, I get another error box saying "Catalyst Install Manager failed to initialize"
and then a third box saying "Catalyst Install Manager failed to initialize Package Manager".
After the third box, it proceeds to installation, however after accepting the User's Agreement I get these error boxes;
"Catalyst Install Manager failed to initialize"
"Failed to find any installable components!"
and then the install screen proceeds to say "Failures occured during installation".
I am running Windows Vista 32 bit and using the Super Administrator account, so UAC is non existent.
Help please? I'm sick of being stuck at 1024x768.
BTW my GPU is an ATi HD3450.

Hi Kabura,
What happens if you install the display driver manual via device manager and advanced installation option where you can choose the driver and directory yourself?
Does it work?
I had a similar problem and this worked for me
By the way: You should also install latest Service Pack for Vista. Check the Microsoft page for an update.
Last but not least you dont post an installation order. In which order you installed the drivers? Generally speaking the chipset driver should be installed firstly, then the display driver.

Satellite Pro A200 PSAFCA: Need Lan and display driver for XP

Hey
please help me!
I have just installed XP on my new satalite pro, but i have had trouble with the drivers.
At the moment I have installed most but from this site i can't seem to find a driver that will help my network card, nor my video NIVIDIA drive...
any suggestions would be very valuable

The Satellite Pro A200 PSAFCA is not known to me. I know only the Satellite Pro A200 PSAE1, PSAE4 and PSAE7. So could you please confirm your Pro A200 series?!
If you cannot find the single XP drivers on the Toshiba page I would recommend checking the LAN and the graphic chip which is installed on the motherboard and use the XP drivers from the chip manufacture.
If you need an graphic driver I would recommend using the drivers from the www.omegadrivers.net or www.laptopvideo2go.com site
Regards

Satellite L10-209 - How to install display driver for Windows 7?

I've formatted my *Satellite L10-209* and installed *Windows 7*. All drivers installed well but the *VideoCard* :xD
How do I install the Display Driver (Video Card)?
Tools & Utilities CD doesn't work with Win7,,

Hi
Im wondering that you installed Windows 7 on this oldie. In my opinion Windows XP would be the better choice but ok, you can do what you want ;)
Anyway, as far as I know your notebook is equipped with an Intel graphic card so I would recommend downloading the driver form Intel directly because the Toshiba website shows only Windows XP display drivers.
http://www.intel.com
Check this!!!

Satellite Pro M30: Need new version of display driver

It is so frustrating!!! How is that possible?!?
The display driver (nvidia fx 5200 go) is so old - according to the device manager the driver date is 08/28/2003 and the version is 45.56 while the current driver in NVIDIA site is 84.21?!?
And there is no new driver in the Toshiba site and you can't install the one from nvidia, as they say that FX 5200 go is not supported and that we have to download a driver from the notebook manufacturer which is obviously impossible!
Did anybody find a solution to that problem?

Hi Valentin,
I had a similar situation with my A30 which was preventing me from playing several games. As you will discover, it is virtually impossible to load the latest drivers from the maufacturers website (ATI or NVIDIA) so I resorted to the OMEGA drivers from http://www.omegadrivers.net/ to see if they would work.
The Omega drivers loaded perfectly and have been working without any problems for the last few months. I can even play the games that the original Toshiba drivers would not support.
I accept that there is a potential risk of the graphics chip over-heating but so far I have not suffered any ill-effects.
regards,

Can not install device driver in Windows 8.1

I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
The USB webcam is shown in Device manager.
When I attempt to update driver and search for it automatically it shows the following message.

Hi Atanu Barai,
There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
Windows 8.1 when you try to download the driver.
If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
Meanwhile ,please check the Event Viewer for related information.
Best regards

Satellite Pro L300 PSLB1E - How to install the Value added package?

Hi there
I have tried updating the value added package on my machine I followed the instructions and removed my previous version and even cleaning the pc with ccleaner and running tune up utilites 2009 but every time i go to install the new value added package i get the same message remove previous version first in the add and remove programmes list.
I have removed this checked and double checked in add and remove and it is no where to be found but still no success installing the new software.
Can anyone help me resolve this matter?
Thanks

Hay
Have you restarted your notebook after removing VAP from the system?
I have updated VAP on several notebooks and have never noticed something like this.
After removing VAP from the system new version was always installed properly.
I can imagine something is still in registry.
You can check it and try to remove manually.
Search all entries for Toshiba Value and remove it.
If this will not work all you can do is to install OS again using recovery image. After clean installation remove VAP again, restart your notebook and install latest version.

Satellite Pro L300-1AD - 1 Beep - Shutdown

hello there, people.
whats does this error mean? ty very much.

well...
yesterday i replaced the old hdd with a new one. i feel it worked well after i started installing drivers on a fresh win 7 installation i did. so when i was installing drivers ( not sure actually at which driver i was, as i`m using a software that installs all missing drivers in a row ) it beep and shut down. now it shuts down without beeping and at startup.
Message was edited by: keidzhijs

Satellite Pro L300-165 -- can SPDIF be enabled?

Got subj. notebook. A300 series has SPDIF out via headphone jack. Both models (A300 and L300) should use same sound chipset, I think.
But Realtek settings do not have SPDIF setting at all.
Is there any way to enable SPDIF on my notebook? Or it is disabled by hardware layer?

I believe the SPDIF port is not included in this model, so SPDIF functionality would be disabled.
The brochure only says it has a headphone socket.

Satellite Pro A100-830 - Can I install Windows 7?

Should i just be able to do a clean install of WIndows 7 of this laptop?
Will i need to do anything funny with the bios or drivers?
Thanks

Hi
You would be able to install the Win 7definitely
But you could get some tiny problems with driver installation.
Whybecause Win7 drivers have not been released for this notebook series.
But this should not be a reason not to install the Win 7 OS.
In most cases the Win 7 would find the drivers automatically but you will need to search some drivers
Here is a nice instruction how to identify an unknown device and to find an right driver for any OS:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

Satellite U405D-S2874 - Can't install sound driver on Windows XP

Hi! I am from Russia! I need your HELP!
I try to install Win XP on Toshiba Satellite U405D-S2874! All drivers work, but SOUND NO WORK!
Give me driver for SOUND on Win XP!
Conexant High Definition SmartAudio 221
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_1179FF53& REW_1000\4&2CF9DD72&0&0001

To be honest its a little bit strange to understand your question...
Can you hear sound at the moment?
Have you tried to update DirectX? Look on the Microsoft website for an update.
In my opinion the best way would be if you run the factory settings. Just boot from the Toshiba recovery disk and follow the screen instructions thats all! All drivers and tools will be installed automatically.
However, you could try to update the BIOS and sometimes I can read in the forum that SP3 is not compatible with all drivers. Maybe you should try a downgrade to XP SP2.

Satellite Pro L300 1AD Can't install display driver on Windows XP

Similar Messages

Maybe you are looking for