Satellite Pro L300 - Cannot install software for USB 3.0 Expresscard

I am trying to install an AKE USB 3.0 expresscard to a Toshiba Pro L300 running Windows 7. The laptop recognises the expresscard but the software does not install correctly so the unit will not work.
Have tried the NEC & Fresco drivers supplied with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.
Has anyone ever loaded in software for a USB3.0 expresscard successfully? Will the laptop take USB 3.0?
Any help would be much appreciated.

If the software doesnt install correctly try to contact card manufacturer and ask for help.

Similar Messages

Cannot install software for printer m521dn

Hello!
I have a problem, trying to install software for HP lj pro m521dn. Tried to use both Full Solution and basic print and scan drivers installer. OS is Win7 enterprise x64. Connection with printer is network. When installing, progress bar reaches 14% and reporting "Fatal error don't allows you to use this programm. Press OK to abort" (personal translate from russian, original message is "Фатальная ошибка не позволяет использовать продукт. Нажмите да чтобы выполнить отмену"). This trouble occures on multiple PC's, but not on all of them (average on 4 of 7). The only solution I found is full reinstallation of OS and installing software on fresh Windows without any drivers installed, except drivers for network card. Can you tell me something useful about this trouble?
P.S. Sorry for my bad English.

Hi @Ranlom
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
 
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
 
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
 
You may find the HP LaserJet Pro M521 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
 
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Satellite Pro M30 - cannot install sound driver

Hi
I have a Satellite Pro M30 which usaed to work fine but I can no longer install sound card drivers on it.
I THINK it has happened since we reinstalled windows XP Pro with SP2 but can not be certain.
It is trying to install the Sigmatel AVC97 drivers and comes up with the following error.
Invalid operating system parameter or this installer does not support this operating system
Any suggestions as there seems to be only one sound driver for the SPM30 family.

Nobody here have got a problems with sound driver installation just you
So is this not strange for you???
Either you did something wrong or its your windows XP issue.
Please note that the Toshiba driver page provides also the Installation Instructions
There you can find the right installation order!
Install your OS again and follow this instruction in this doc!

Cannot install software for HP envy 5530e

I've successfully installed software on 2 of mycomputers from a CD. I'm now trying to install software from hp.com/ePrint/ENVY5530 on a laptop with no CD Drive. The software seems to bedownloaded but I cannot open the file to start the installation process.

Hi,
Software and drivers for the printer can be downloaded from link below.
http://support.hp.com/us-en/product/HP-ENVY-5530-e-All-in-One-Printer-series/5304881/model/5304882/d...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Satellite Pro 4200: Cannot install the correct graphics drivers Win ME

Hi,
I have just re-installed Windows ME on the Satellite Pro 4200 machines but I do not seem to be able to install the correct graphics/diplay drivers. Can anyone help
Thanks
Steve
Message was edited by: skc1959

Hi
What graphic card was installed in this oldie???
I dont think that Toshiba provides any Win ME drivers for this unit and therefore you should Google in the internet for graphic driver.
Good luck

Cannot install Software for E2500 or access router setup page

Please help! I first bought the e1200 version and when I tried to download it on my computer, it worked at first and installed correctly, but the cisco connect didn't properly install. I was able to log into the router online setup page ONE time. I tried to reset it and reinstall but it will not work.
So I thought ok let me go and purchase a better one (thinking it was the router version having issues). So I brought it back and purchased the E2500 and I am having the same trouble.
I have tried to reset it about 20 times and reinstall and it will not install at all. It still gives me internet, but I cannot log into the http://192.168.1.1/ page at all, it tells me internet cannot display...
Please help!

Hi there. Please check first if router is responding properly. Are you on Mac or Windows? On Windows pc, open command prompt (start>run>cmd for XP/ start>search>cmd for Vista and Windows 7) and type ping 192.168.1.1 and press enter. If you are getting 4 lines of replies from 192.168.1.1 bytes 32 something then router is okay. On command prompt again go down to the next line where it has the flashing cursor and type this time: start http://192.168.1.1. After you press enter, your browser comes up and normally will prompt you to log-in to area 192.168.1.1 and that is where you can use admin in both fields (username and password since you reset the router already). If you get page cannot be displayed still, disable proxies on the browser. Example if you are on IE, you click tools and then internet options and go to connections and click lan settings. On the small window that comes up, just make sure nothing is checked and then try on the address bar again http://192.168.1.1. If your computer still cannot access it, try a different browser or a different computer.

Cannot install software for 2nd iPod

I have iPod software already installed for my 1st iPod.
To set up the 2nd iPod I have tried the following:
- insert iPod sofware CD that came with the iPod. But when run, it asks if I want to remove the application. I've tried saying OK to remove, then installing the software, but it doesn't ask me to set up the 2nd iPod. I think it's just updating or replacing the software from the 1st iPod.
- plug the iPod in without installing the software. Nothing happens, it doesn't appear in iTunes and the 'do not disconnect' remains on the screen.
Help!?
Thanks, Emily

Hi and thanks for your response. I tried this, and when I attempt to install the updater it asks if I want to remove the software. I say yes, and of course it removes the iPod software! Then I do it again and it says it is installed and all seems to go well, but then I can't get the 2nd iPod to sync up. It says it can't read the iPod and fails to actually copy any files over to the iPod.
I have uninstalled v. 5 of iTunes and re-installed v.4 but same error continues to occur. Do you think I am experiencing an error related to 2 iPods, or perhaps it's something else altogether? The 1st iPod still works fine...

Satellite Pro L300 - Cannot use Intel ProSet WLan tool with Win XP

Hi! I have same problem. I have installed an XP SP3 and I can't use the *Fn+F8* hotkey to switch on/off the WLAN function. Other Fn keys operate properly. The wlan also operates, but it can be used only by windows built-in function. The Intel ProSet or Atheros programs don't work. It seems "no wlan driver installed". The card is a Realtek 8187B, downloaded the driver from Toshiba original support site.What can I do?

> The WLan also operates, but it can be used only by windows built-in function. The Intel ProSet or Atheros programs don't work
If the WLan works fine using the Windows zero configuration then the WLan card is enabled and dont need to use the FN+F8.
The point is that your 3rd party WLan configuration tool doesnt work because your WLan card is *Realtek!!!!*
The Intel ProSet works ONLY with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have got a Atheros Wlan card.
Youve got Realtek so use the Windows own zero WLan configuration!

Satellite Pro L300 - Cannot see anything on screen

Hi,
I stupidly dropped the laptop on the floor and now I can hear the laptop powering up and windows loading but I cannot see anything on screen. If I pull the laptop towards me, applying slight pressure, the backlight comes on but there is still no display. If anyone could help it would be much appreciated.
Thanks

Hello
Im sorry to hear that, JungleMan but this can happen to everyone. ;)
Anyway, I think its something wrong with display and FL inverter that controls the backlight. Can you see a picture on an external monitor?
If yes the internal one needs replacing and also the FL inverter I think because you must apply slight pressure that backlight comes on.
You can order a new screen and other parts from an official Toshiba authorized service provider in your country.

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Satellite Pro L300 -software-service says I need update for graphics driver

I downloaded the DesignByMe software from http://designbyme.lego.com/en-us/default.aspx
The installation run without problems, but when I want to start the program it restarts over and over again. The picture doesnt load fully, instead there are black spots. I cant click on anything nor close to programm .I thought maybe the installing process didnot finish properly so I downloaded the software again but the problem is still the same. Im using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6
I contacted the lego support and they answered: "You most likely need to update your graphics driver. Please contact your computer manufacturers customer service or website for a free upgrade"
Is this likely and if so which upgrad edo I need?

Hi
I dont know if updating your display driver can solve this problem but if the manufacture of the software says that its worth a try!!! ;)
The update is pretty easy: Firstly download the latest version here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
If you have downloaded the latest version, remove the old one firstly. Check the software list in control panel and follow the screen instructions. I assume you have to make one restart and after this you can install the downloaded version.
Good luck! :)

How to install Windows XP in Satellite Pro L300-1A9?

Hi!,
first of all, sorry if I'm asking something really obvious, but I'm quite new with this issues...also sorry for my English, I'm not native.
I have a Toshiba Satellite Pro L300 1A9 with Windows Vista preinstalled but the thing is I prefer Windows XP. I have tried to install it but it won't work.
I have read lots of posts and comments about this issue in this forum and also in the web. The problem is I don't know if the procedure and the drivers to download are the same for all the L300 models. Mine is L300 1A9.
Anyone could give me some extra simply instructions (I'm a beginner) about how to do solve this problem or any link relating this issue? I have seen many of them, but none about this model L300 1A9.
Thank you very much!!

Hi Lars_3,
thank you very much for your reply and interest.
When I say that installing Windows XP doesn't work, I mean that my laptop has Windows Vista but I have tried to reinitialized (format) it to install Windows XP, but when I run the Windows XP (original) disk an error message pops up and I can't continue the installation.
I have had a look to the Toshiba's downloads link you posted, but there's no mention to the L series model. The options available are for M-Series and Net-Book series, so I wonder if it is possible to use one of them for my Toshiba Satellite Pro L300 1A9?
Thank you very much for your kind help!

Satellite Pro L300 1AD Can't install display driver on Windows XP

I just installed XP on my Satellite pro because my internet modem doesnt work with Vista.
I went on the main Toshiba website to install the display drivers but they wont install, it keeps bringing up the message "this driver is not for this computer please contact manufacturer".
I dont understand why because all the other drivers I downloaded off the same page work, its just the display one. Does anyone know whats wrong?

Have you downloaded the newest driver for Satellite Pro L300?
On the Toshiba website its version 6.14.10.4953.
Alternative you can try the drivers from Intel but normally the Toshiba driver should work.
I always use the Toshiba driver and never had problems.
By the way, I looked on this Toshiba website:
http://eu.computers.toshiba-europe.com

Mac Pro stuck on gray screen after installing software for a new keyboard

I am having a huge issue with my very important work computer! For a few weeks, my Mac has been freezing on the gray screen during start up. Since I had two external hard drives plugged in, I would unplug one of them and the Mac would always restart correctly once one was unplugged. Well today I was installing software for a new keyboard and the mac prompted me to restart. Once I restarted, the gray screen came up again and no matter what I did it would not start up correctly again. I tried unplugging everything except the keyboard and monitor and nothing works. I tried ejecting the crash-causing CD with the keyboard using all of the commands I found on this forum board and nothing worked. I saw forums about manually ejecting the CD by pushing a pin-hole but I cannot find that pinhole anywhere! Then again, the CD might not even be the problem but since the computer gave me the gray screen of death right after using the CD I am thinking that it is the problem. I use this computer for editing a TV show and creating websites so there is a ton of files on it and I need to get it up and running again ASAP. Any suggestions would be appreciated and I am sure by now you can tell that I am not a Mac expert so please dumb it down for me. Thank you!!

I would start by breaking your thoughts and sentences out from one long paragraph.
Start at the basics.
Always have backups.
One at least that is a spare boot system you can use.
Clone your system. SuperDuper does a great job for only $29
Boot from another hard drive or last OS X DVD
Repair your drive with Apple Disk Utility along with 3rd party disk maintenance and repair
Hold Option key until the boot manager, then hold mouse to open optical drive.
You can hold mouse on startup and it will eject also.
Hold and continue to hold Shift key during startup to repair the boot drive in minimal fashion.
What device and driver? hint: never use CD, just go online as the CD is usually out of date anyway.
Fill in Mac OS X version and more about hardware would help in posts and in your profile signature.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.macintouch.com/readerreports/harddrives/index.html#d12aug2010
http://www.alsoft.com/DiskWarrior

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

Satellite Pro L300 - Cannot install software for USB 3.0 Expresscard

Similar Messages

Maybe you are looking for