Satellite Pro L300: WLAN is not in device manager and is missing

Hi,
I have a Toshiba L300 which I downgraded from Vista to WXP months ago. So I decided to stick with Vista and when I installed Vista the WLAN was missing in device manger and it didn't work. I tried downloading drivers adapters from Toshiba drivers download and still didn't work. Only my Ethernet is showing in device manager....btw I have a Realtek WLAN
Also,my VGA graphics card doesn't seem to update driver and when it does it says that the system is below minimum specs.
It's soo weird in WXP it was working fine..... Any solutions?

>I tried downloading drivers adapters from Toshiba drivers download and still didn't work.
What does it mean exactly? Have you installed WLAN driver or not? Is WLAN card installed properly and listed in device manager as Realtek WLAN card?
How to understand you?
Have you problems to install WLAN card or to configure WLAN connection?
If the WLAN card is installed properly enable the card with WLAN switch and then use FN+F8 key combination and be sure card is set to ON.
Which display driver you want to install? Which version?

Similar Messages

Satellite Pro L300-1FN does not boot - hangs at BIOS splash screen

My Satellite pro L300-1FN is refusing to boot up. When switched on the laptop displays the toshiba/insyde H20 BIOS splash screen and the "Press F2 go to Setup Utility, F12 go to boot menu" message and flashes the hard disk access light but does not attempt to continue loading. I have left the bios at the splash screen but it does nothing for many hours on AC or runs the battery flat while on battery.
Is there a way of re-setting the BIOS on this unit? If it were a desktop unit I would remove the CMOS battery to force a BIOS reset but this is impossible on a laptop. The hard disk is fine as I have connected it to another system to remove valuable data.

*I managed to fix this issue* ,,, thanks to some other dudes on other forums
What i did was Format a Floppy disk as MS-DOS boot using a Windows XP PC and USB floppy drive, then downloaded the latest BIOS for my L300-1BW laptop model, copied *.fd bios image to the floppy disk and renamed it to BIOS.fd.
Connect FDD to the toshiba laptop with out AC connected. Held Power button for 12 seconds, connected AC adapter, then held Fn+F, powered on , and kept the Fn+F keys held down for about 10 seconds into the reading of the floppy drive just to be sure, then let go. The screen was black throughout the process. I left this for a few minutes, or until it had finished, the laptop rebooted itself, and voila, it now goes passed the TOSHIBA POST logo screen :)
I hope this helps others with Toshiba Laptops. should work for any Toshiba laptop.

Satellite Pro L300 - Error when installing Intel Storage Manager

I have downloaded all the drivers. One of them will not install for me. "Intel IMSM Driver SATA V8.0.0.1039 Windows XP 21.12 MB" for PSLB9A-02H002. It gives me an error "This comp does not meet the minimum requirments for installing the software".
Any solution for this. Thanks. Regards.

Thanks for the respond. I should start from the beginning. I am a bit tired already and thinking of installing vista which I don't want to do.
This is a laptop Satelite Pro L300, mod PSLB9A-02H002. I started installing XP on it by changing the BIOS to compability mode otherwise it would not read the XP disk. Installed XP with no problem wiping the hidden partition (if it was there). I downloaded all the drivers from this site for the correct model. The problem starts there. Laptop is freezing every so often, sometime it will boot into an empty screen etc. Just few moments ago a message came up:
"The device driver for the 'Intel(R), Wireless WiFi Link 5100' device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update thid driver."
In addition I dont have an access to floppy ext. drive to follow the procedure mentioned above, I dont even know if this can be done after XP is installed.
The BIOS setting has to stay in "compatibility" option otherwise if its on "AHCI" it will not boot.
I would love to make it work with XP but it may not be possible. Any further help would be greatly appreciated.
Message was edited by: RobertL

Satellite Pro L300 - WLAN connection has stopped working

FN+8 indicates that the wireless is on as the icon shows but suddenly tonight the connection has failed while I was browsing the internet and I can't get it back.
I have reset the modem - the laptop is currently connected by ethernet cable to the same modem with a good connection. The laptop is about 16 months old and is running Windows 7 Pro. I've updated all drivers tonight but even though it's "on" it isn't working.
Will dig out the wireless usb modem tomorrow but I'm wondering if the card has given up :(
null

Yes it was listed. Oddly enough when I booted it the next day the wireless kicked in straight away. Go figure!
Talked to a friend who repairs puter's in the US and he's told me that if it happens again to reset the wireless card - preferably without the two wires disconnecting from the card. I'm used to doing hardware and software upgrades with towers - time to learn about laptops :)
Thanks for posting a reply xaver :)

Satellite Pro L300 - Windows does not boot up

Silly person that i am, and being computer illiterate i turned off my laptop while it was downloading updates.
Now, when i turn it on it gives a black screen with 2 options for startup.
1 for start in repair/restore mode,
1 for start windows normally but neither work.
I made the recovery discs after i purchased the laptop but i am wary about using it.
Though i dont do a lot of work that needs backing up, i only surf the net and do emails.
Are there any other safer options for starting up?

Hi
If you have no important data on the HDD then you can use the Recovery disk in order to reinstall the OS again and to set up the unit back to factory settings.
The recovery disk will format the HDD and will erase everything from the HDD.
The installation procedure does not take a long time you need to boot from Recovery disk and have to follow the instruction on the screen. Thats all!
Greets

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite Pro L300-EZ1004X - TouchPad stopped working, BIOS update does not help

I have a Satellite Pro L300-EZ1004X laptop. Few days ago TouchPad stopped working. This is not a Fn + F9 issue.
In Device Manager it looks like hidden device and has (!) on it. Re-installing Synaptics drivers, updating them, removing the device in Safe Mode - nothing works. (TouchPad did not work in Safe Mode). One of the forums mentioned BIOS update. For some strange reason the latest BIOS for this specific laptop is from 2008 (ver. 1.5). Other L300 laptops have option to update BIOS to ver. 2.20 (2010) but not mine! I tried to load it (ver. 2.20)from Windows and from boot disk without success. I installed BIOS ver. 1.5. After reboot - keyboard stop working! And TouchPad ... still dead and still appears as hidden device. Using external mouse I restarted the laptop and get into the BIOS settings. In Advanced Settings disabled TouchPad completely. KEYBOARD START WORKING IN WINDOWS!!!
Any suggestions on how to make this TouchPad to work? Or how to get newer BIOS for this Laptop?
Thank you in advance!

Sounds like it has died, you can purchase a new one from a parts supplier and pay someone to install it or if you are any good with such things you can try to do it yourself. I suggest just sticking with the external mouse.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Satellite Pro L300 will not boot after Bios update

Help please.
I have just formated a Satellite Pro L300 laptop.
I used all the updated drivers from Toshiba and all went very well.
I then updated the bios with the latest version.
After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
Any ides welcome

Hi
I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

Satellite Pro C660-1NQ does not detect WLan network

Hi Guys,
We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
I have checked device manager and the wireless card does not show in here.
I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
Any ideas as to what i can try next?
Cheers,
Ash

Hi
It seems that the notebook would support the Atheros 802.11agn Wlan card.
Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
If its not listed then I recommend installing the WLAN driver which can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads
Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
Hope this helps to detect the Wlan chip!!!

Satellite Pro L300 1AI LCD screen backlight not working

Hi All,
I have a Satellite Pro L300 1AI running Windows Vista the computer boots up and works fine but the backlight on the screen does not appear to be working.
Are there any settings in Vista that can affect this (other than the Fn key command on the keyboard and the settings in Control Panel)? Strangely it only seems to have happened since i installed Skype but I can't see how that could possibly affect it.
Any help is gratefully appriciated...

Hi
Whats wrong exactly? Is notebooks display brightness too low?
Do you see everything on the screen like behind a thick fog?
Well, usually the FL inverter controls the display backlight and if the FL inverter starts to malfunction then you would get the problem like this one.
There is no other solution as to replace this FL inverter.
Its a tiny part behind the display frame I think its a job for an ASP technician
Greets

Satellite Pro L300 - CD/DVD does not show on my computer

Hello ! This is probably a silly / easy question but I am very new in this and..... my CD/DVD unit does not work.
It does not show on "my computer" and when I insert a disk, nothing happens (except for a buzzing noise but then nothing)....
Can someone kindly help me?
As the helpline does not answer on Saturdays...
Many thanks !

Hi
Try this;
Access the device manager and remove the CD/DVD drive from the device manager list.
Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and check it again.

Satellite Pro L300/L300D series wont start properly

Hi guys
I got a Toshiba Satellite Pro L300/L300D series and basically one day the laptop just stopped working and whenever I turned it on I just got to this blank page saying press CTRL + ALT + DEL to restart the system. So I tried to reboot it pressing F12 and using a new copy of Vista Ultimate. However when I come to install Vista on the drive it states that there is no drive present on the system.
Does anyone have any idea how I can overcome this problem, your help would be much appreciated.
Thanks

>What do I need to do and how can i create a partition if the computer wont start.
Can you please explain this again? It sounds pretty illogic to me. If your computer wants start how you can try to install OS?
Sorry my friend but now I am asking myself do we understand us correctly or I write about thing A and you write answer about something that I can define as thing B.
Again:
Start your notebook and press F12 to enter boot device options
Put Vista installations DVD into optical disc drive
Choose CD/DVD drive in the list and press ENTER
Installations DVD will load (Windows is loading files...)
Follow the menu on the screen
When the stage with partitions is shown on the bottom right side (Drive options advanced)
The additional menu on the bottom will be shown
Delete all listed partitions/partition
Use option NEW and create new one
Try to install Vista on this new created partition.
Can you do this or not?

I've got some questions about Satellite Pro L300

1.) How could I Update my Bios? I find the zip- File but no further Information how it works?
2.) I want to update for more memory. 2GB are less for fast working. Where could I find Informations about the memory controller- e.g. Voltage, Timings... for pass new memory of 4GB.
3.) My PSSD1E shows me in Windows7 - Systems Hardware one empty SATA- Controller.
Is it possible to take it optional for an outgoing connection- eg SATA-OUT for extrenal device?
Sorry for my worst english.

Satellite Pro L300 is offered with several different hardware configurations. I dont know which one do you have and there is no sense to discuss about this without exact notebook info.
If you want to have general conversation here than dont claim about this forum.
To get some precise answers inform us about exact notebook model.
One more time:
1
For all new notebook models Toshiba offers Win update only. That means BIOS update can be done under running operating system. For more details check Toshiba document.
2
What you need is just part number of compatible RAM modules. All other information is not so relevant for you. If you want to get this info post exact notebook model.
You can test what you want but fact is that Toshiba offers list of compatible RAMs you can use with your notebook. All listed RAMs are tested. Other way you can visit KINGSTON page to check their list of compatible models for different Toshiba notebook models. Kingston offers high quality products and all listed RAMs are tested too.
Who knows which RAMs you have used for your tests? Maybe some cheap no-name products. Many people have used such RAMs and at the end nothing worked.
3
Why you complicate the whole situation? For external devices you have available ports. For internal device you have ports on the motherboard. End of the story.
And yes, visit your local dealer ant talk with him, especially about question number 3.

How to install Windows XP in Satellite Pro L300-1A9?

Hi!,
first of all, sorry if I'm asking something really obvious, but I'm quite new with this issues...also sorry for my English, I'm not native.
I have a Toshiba Satellite Pro L300 1A9 with Windows Vista preinstalled but the thing is I prefer Windows XP. I have tried to install it but it won't work.
I have read lots of posts and comments about this issue in this forum and also in the web. The problem is I don't know if the procedure and the drivers to download are the same for all the L300 models. Mine is L300 1A9.
Anyone could give me some extra simply instructions (I'm a beginner) about how to do solve this problem or any link relating this issue? I have seen many of them, but none about this model L300 1A9.
Thank you very much!!

Hi Lars_3,
thank you very much for your reply and interest.
When I say that installing Windows XP doesn't work, I mean that my laptop has Windows Vista but I have tried to reinitialized (format) it to install Windows XP, but when I run the Windows XP (original) disk an error message pops up and I can't continue the installation.
I have had a look to the Toshiba's downloads link you posted, but there's no mention to the L series model. The options available are for M-Series and Net-Book series, so I wonder if it is possible to use one of them for my Toshiba Satellite Pro L300 1A9?
Thank you very much for your kind help!

8 questions from new owner of Satellite Pro L300

Hello all forum users!
I bought a new Toshiba laptop, the Satellite Pro L300, and have until 14 January to test it - if it looks like it isn't working properly I'll return it to the store where I purchased it.
Here's a list of questions I have:
1. Every time I turn on the laptop or it comes out of suspended or hibernation mode, and when I turn it off, the cd/dvd drive makes a loud mechanical clunky noise.
It sounds to me like the carriage that carries the laser and optics is running into a mechanical stop.
Is this normal?
2. There is one hot subpixel on the display (blue) and according to the Toshiba info in the box, this is normal and is not cause for return.
Should I be concerned about this?
3. When I run the memory test at system boot, it states that it will start windows automatically at test termination, and show me the results of the test.
It runs the test, starts Vista, but I don't see any results report.
Where do I find this report?
Is there a known problem with this test?
4. The Toshiba utility program to perform diagnostics from within Vista does not work. Every time I run the test (PCdiag.exe) I get a Vista error message saying a fault was found in KERNEL32.dll.
Where can I get a fix for this?
I've already installed the updated files on Toshiba's web site for the 'Value Added Pack', which is where this utility is located, but still get the error message.
5. I would like to access the bios settings at boot, but haven't found the way to do it yet.
F2 gives me a menu for memory test or normal system boot.
Esc doesn't get me into bios setup either.
There is a Toshiba bios utility I can run from Vista, and from what I see any bios firmware upgrades are also to be done through Vista.
Is there a way to access bios at boot?
6. I would like to run XP on this system and understood that this model (Pro L300 PSLB1E) was XP compatible, and that I should be able to download all drivers from Toshiba to run on XP.
Has anyone done this?
7. The laptop installed and configured Vista basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for 'Vista Business OEMAct'. I was sold this laptop as having Vista Business with the option to downgrade to XP Pro. The box didn't come with any cds or dvds, and no manuals explaining how to install Vista Business.
This is enough reason to return the laptop to the store where I bought it, which is a hassle I would prefer to avoid if I can install Vista Business.
Can anyone help me understand what is happening here?
8. Is there a way to contact technical support by email?
Thanks in advance to anybody that can answer any of the above questions!

> 1. Every time I turn on the laptop or it comes out of suspended or hibernation mode, and when I turn it off, the cd/dvd drive makes a loud mechanical clunky noise.
My CD/DVD drives make similar noise too from time to time. Not always but sometimes. I think this appears because the drives laser lens calibrates in the right position.
> 2. There is one hot subpixel on the display (blue) and according to the Toshiba info in the box, this is normal and is not cause for return.
Well, you need an certain amount of dead pixels to get a screen replacement
Please check this FAQ:
http://aps2.toshiba-tro.de/kb0/TSB5400ZD0002R01.htm
> 3. When I run the memory test at system boot, it states that it will start windows automatically at test termination, and show me the results of the test.
There is no problem. I believe you mean the memory test while POST (power on self test). If there would be a memory fault then your notebook would not boot up properly.
> 4. The Toshiba utility program to perform diagnostics from within Vista does not work. Every time I run the test (PCdiag.exe) I get a Vista error message saying a fault was found in KERNEL32.dll.
Hmm the Value Added Package contains the PC diagnostic tool for Vista. I would recommend removing the old VAP and reinstalling the new downloaded from the page.
> 5. I would like to access the bios settings at boot, but haven't found the way to do it yet. F2 gives me a menu for memory test or normal system boot. Esc doesn't get me into bios setup either. There is a Toshiba bios utility I can run from Vista, and from what I see any bios firmware upgrades are also to be done through Vista.
The notebook seems to use the Phoenix BIOS and therefore pressing the F2 button should enable the BIOS. Press the F2 immediately after notebook has been powered up.
> 6. I would like to run XP on this system and understood that this model (Pro L300 PSLB1E) was XP compatible, and that I should be able to download all drivers from Toshiba to run on XP.
Such XP drivers are placed on the Toshiba European page.
>7. The laptop installed and configured Vista basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for 'Vista Business OEMAct'. I was sold this laptop as having Vista Business with the option to downgrade to XP Pro. The box didn't come with any cds or dvds, and no manuals explaining how to install Vista Business.
Never hear that this notebook would be delivered with Vista business As far as I know this series has been preinstalled with Vista Home Premium
> 8. Is there a way to contact technical support by email?
If you have some problems with your notebook you can contact your ASP in your country.

Satellite Pro L300: WLAN is not in device manager and is missing

Similar Messages

Maybe you are looking for