Satellite Pro L40 PSL43E I need to find all the XP drivers

I need to find all the XP Drivers for this particular notebook. Any ideas where i can find them. on this site i only get the "how to downgrade" Pease Help ASAP

If such drivers are available then you will be able to find such drivers on the Toshiba European driver page.
If the drivers are not available on the Toshiba European driver page, then the drivers were not released.
But Ive got one hint; I found some XP drivers for Sat L40 series. Some series supports the same devices and therefore the drivers should run too.
Check some single XP drivers from different L40 series and maybe it would run.
Ciao

Similar Messages

  • Satellite Pro L40: black screen but faint image in the background

    Satellite Pro L40-17H (PSL4BE-00T005EN)
    Hello,
    I would appreciate some help with the following problem:
    SYMPTOMS: Screen is black, but I can see that there is a faint image in the background.
    I get a good image in external monitor.
    I suspect, _among others_, that there may be a faulty *lid sensor/switch*, but I have been unable to locate it, although I have disassembled the unit.
    If somebody knows, please let me have the exact *location* where I should look for the switch.
    Thank you

    Thank you RandyRoberts
    You are probably right, it is likely that the inverter is faulty, or it might be a bad lamp.
    Nevertheless, I cannot exclude the possibility that there is a bad or stuck lid switch. That is why I insist to check that one out as well.
    I would still like to know where the lid switch is located on the L40.
    Thanks and regards.

  • Satellite Pro L40 (PSL43E) Wi-Fi intermittant

    Well I am fed up with this laptop and its intermittent Wi-Fi connection.
    You just dont know from powering up if it wants to work or not, and when it doesnt, it can be an absolute nightmare getting it to detect the router. The adaptor properties always say the device is working properly, and the wireless is always turned on. Other laptops never do this, just this Toshiba. It has naffed me off so much that this is deffo the last Toshiba I will be buying.
    Ive never had such a frustrating laptop before even my old time computer was better than this one.

    There are many models of L40, which presumably have some differences. A neighbour of mine also has a L40/PSL43 and is having WiFi problems which I am trying to help with, though my decade or more of WIndows and Linux expertise is in CPQ PCs and PDAs, and WiFi in general, rather than Tosh-specifics. Let's leave aside whether it was ever a bright idea to ship a Vista laptop with only 512MB, I'm fixing that later today with another 1GB, once I work out where the memory slots are (it's not in the user manual?!).
    The laptop in this picture refuses to see any WiFi these days, although it has worked in the past. Now, without knowingly changing anything, it fails even in a setup where other systems see the WLAN just fine (ie the problem is likely with the laptop not with the WLAN). Fn/F8 under Vista always brings up the little WiFi popup but the WiFi is always crossed out, which doesn't seem right. The popup disappears without any opportunity to change anything and I haven't yet found any relevant docs or help; the only docs I have are the PDF user guide which doesn't shed much light on how Fn/F8 (or anything else) is supposed to be used to enable/disable the WiFi (or which of the covers is for memory slots).
    Vista has all the individual updates applied (including a WiFi driver update) but not (yet) SP1.
    The Tosh-supplied connectivity tool just tells me WiFi isn't working. MS control panel shows the WiFi device as present and working. The MS "repair connection" tool just tells me wireless isn't enabled and to sort that first.
    So how do I make this wireless work? Suggestions (and references to relevant detailed help/documentation) most welcome. My current plan is to see if I can find a live Linux that understands this particular WiFi setup, and if I find one, see if WiFi works any better under Linux than Vista, just to prove that the laptop hardware really works OK.

  • HT4906 i need to find all the information this computer

    im kindly requst to help me find out the information in this lapto from the day strt working, i need to find out all my data from this computer. thanks.

    Sorry but your question is not at all clear
    Does this inovlve iPhoto for the Mac in any way?
    What exactly do you want
    What version of iPhoto, of the OS and what model of computer do you have?
    LN

  • How to find all the user exits includes ,

    Hi All ,
    I need to find all the includes which are created for purpose of implementing user exits , I know they all start with ZX* but where to get the list .
    THank you all
    Vinay Kolla

    Hi Vinay....
    Just excute following program in your ABAP Edter....
    ( Input parameters: T'CODE and User exit type.)
    >TABLES: MODSAP, MODACT, TSTC.
    >
    >PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
    >           INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
    >
    >DATA: SEARCH1(6),
    >      SEARCH2(3),
    >      SEARCH3 LIKE MODSAP-MEMBER.
    >DATA : FIRST_ROW VALUE 'Y'.
    >
    >CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
    >             '%' INPUT2     INTO SEARCH2.
    >
    >SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
    >  FIRST_ROW = 'Y'.
    >  CHECK TSTC-PGMNA NE SPACE.
    >  CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
    >  SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
    >                       AND MEMBER LIKE SEARCH3.
    >    SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
    >    IF FIRST_ROW EQ 'Y'.
    >      WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
    >                                       45 MODSAP-MEMBER, 70 MODACT-NAME.
    >      FIRST_ROW = 'N'.
    >    ELSE.
    >WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
    >    ENDIF.
    >    CLEAR : MODSAP, MODACT.
    >  ENDSELECT.
    >  IF SY-SUBRC NE 0.
    >    WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
    >  ENDIF.
    >  CLEAR TSTC.
    >ENDSELECT.
    >
    >END-OF-SELECTION.
    >  CLEAR: SEARCH1, SEARCH2, SEARCH3.
    Thanks,
    Naveen Inuganti.

  • Can I upgrade the T2310 CPU in Satellite Pro L40-15D series laptop?

    Hi, ( I apologise if this has been asked before but when I search ' Satellite pro l40 series' I found no relevant answers )
    I've been searching around the net & so far found some conflicting answers to this question so hopefully this forum may be able to help.
    I have a Satellite pro L40 15D laptop and I wish to upgrade the Intel Pentium Dual-Core 1.46 Ghz T2310 CPU to a Intel Pentium Dual-Core T4300 2.1GHz 1MB 800 CPU or something similar.
    I have found the following information from http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html
    " f you consider a CPU upgrade, there are not many options available. The Intel GL960 express notebook chip set supports only up to 533 Mhz FSB processors. So, most of the up-to-date Core 2 Duo CPUs (with 667MHz) cannot be used. "
    But then I have also read that the GL960 can run processors of 800Mhz?.
    I also asked the question on ebay from the seller of the T2310 CPU & received this answer
    "SHOULD be okay, but your T2310 has 533Mhz FSB and the T4300 has 800Mhz.
    Most modern intel motherboards should easily accept an 800mhz cpu, but I cannot guarantee. Might be an idea to see if you can find out if there are other models of Toshiba L40 that also have 800mhz chips, as that would be a good indicator.
    And if I can not upgrade too a T2310 because of the 800mhz is their a 533mhz cpu that will be compatible & more powerful for audio production than my current 1.46 Ghz T2310 CPU.
    I have only had this PC 4 years from new,it would seem to me to be not very resource friendly if this laptop has not be designed to handle upgrades.
    Thanks for any guidance.
    Message was edited by: ib1

    To quote
    'Problem is that CPU upgrade is not supported and all you do is on your own risk.
    Check also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm"
    Helpful link thanks :-)
    Of course any upgrade I did personally would be entirely at my own risk .
    So it's not a good idea as mentioned .
    I would still like to know if technically it is possible and if so it's most probably been done & maybe works fine, rather then half answers .
    Message was edited by: ib1
    Alternatively do you guys have any suggestions, other than buying a new laptop, of ways to increase the performance for music production.
    I already have 1.99 GB of ram installed .
    Would using a external USB sound card and bypassing the internal sound card give me a little more processing power . I believe it's the real time processing of audio effects etc that make audio production demanding on a cpu.Could that processing somehow be shared with a pro audio card? .
    Either way thanks for the help guys :-)
    Message was edited by: ib1

  • BIOS update issue on Satellite Pro L40-15A - Old BIOS can't recognise EEPROM

    Hi
    I'm having trouble flashing my bios.
    I have a Satellite Pro L40-15A.
    The Toshiba winflash tool that comes with the bios file tells me that the 'Old BIOS can't recognise EEPROM'
    I was recommended to use AFUDOS on another forum but that tells me the bios has an invalid boot block.
    AMI flas for dos tells me the flash rom is write-protected??? There is no option in bios to disable it and I don't think anyone would be dumb enough to put a hardware Bios protect jumper on a laptop.
    Please help
    Thx

    Hi and thanks for reply
    The 5.10 bios update is only for XP laptops, my one came with windows vista installed so I need v2.20
    "old BIOS cannot recognise EEPROM" is the error message i get when i try to flash the bios with the supplied software from Toshiba
    _+UPDATE:+_
    New verion of BIOS update has worked!!
    Case could be closed

  • Memory upgrade on Satellite Pro L40-15d

    Hi
    I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
    But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
    Regards

    Hi
    The notebook doesnt boot after the memory upgrade due to these different issues;
    - memory modules are not compatible together
    - memory modules are not compatible with the notebook
    - memory modules are faulty
    - one of memory slots is faulty
    In most case the memory module replacement helps.
    One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
    Several weeks ago I have updated my memory and the notebook didnt boot.
    I thought its a memory malfunction but after module switching the notebook booted correctly.
    Good luck

  • Satellite Pro L40 - What is a average battery runtime?

    Hi there,
    I just recently received my Satellite Pro L40 and am just wondering what the average battery runtime is? Once fully charged it only seems to be able to handle 1hour max. Is this normal?
    The laptop I had before was the same, but my friends laptop, which is more than a year older than mine, runs for more than 3 hours on a fully charged battery.
    Is there a fault??
    Thanks

    Hi
    It is not easy to answer this question because the battery working time depends from the notebook usage. You should know that you will be able to run the notebook much longer on battery power using only some common applications like Word or Internet Explorer.
    Playing games, watching DVDs or burning the CD/DVD waste more battery power because the performance of the single devices is much higher!!!!
    Fact is that the Pro L40 notebook was equipped with high-tech parts and devices. The notebook supports a strong Intel Pentium Dual-Core CPU, huge HDD, nice GPU and and and
    Furthermore you should know that the preinstalled Vista OS eats many resources and waste more battery power as the Win XP!!!
    All this factors has a influence on the battery working time.
    Last but not least you should know that there are different batteries on the market.
    If you want to increase the battery performance buy a stronger battery!!!
    regads

  • Satellite Pro L40 - Sound Driver after Windows XP SP3 Install

    Hi,
    I had bought the Satellite Pro L40 about 6 months ago and the speed of the laptop was too slow with windows Vista. So I decided to install an old copy of windows XP that I had bought earlier. I upgraded the windows installation to SP3 before installing all the drivers.
    Now all the drivers have been installed properly except the sound driver. I downloaded the XP version of the driver from the toshiba website but it did not work. So I though maybe the vista version would work, so I downloaded that. But that didn't work either.
    Can anyone suggest a solution where I can get the sound driver to work? Preferably without having to get the windows reinstalled again.
    Please help me out...!
    Thanks

    hi there,
    Try reinstalling the soundcard driver for XP; Just go here -- > [Realtek Soundcard Driver fo XP|http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]
    Hope this helps :)
    Message was edited by: iSkO

  • Satellite Pro P200 PSPB7E - I need some XP drivers

    Hi everyone,
    First I would like to say this forum is soo great because after battling for a week trying to install XP I got it finally done, however now comes part 2 of the problem :(
    Before I installed XP on my system I made sure that I have all the drivers so I went on the Toshiba website and downloaded all the XP drivers. When XP got loaded I could see there were a lot of drivers uninstalled in Device Manager so I installed them. However a few of them remain and I dont know what to do as I've downloaded all of them from the Toshiba website.
    I remember before I installed the drivers there were 2 audio required and one of them has installed, I also tried installing the 'Display driver' but I cant because its not letting me run the actual setup file it says the instsallation file being created is more than 88 characters :s never came across this error message before.
    So in all I have 3 drivers missing, they are:
    Audio Device on High Definition Audio Bus - but my sound is working
    PCI Memory Controller, and
    Video Controller (VGA Compatible)
    Any ideas to what I could do? THanks

    Yes, the forum is really helpful!
    Im a regular guest here. Ive got 3 notebooks and I would like to share my knowledge with other users
    *Just for note;*
    ALL XP drivers are released for this Satellite Pro P200 PSPB7E notebook on the Toshiba European driver page!!!
    Furthermore if you would check the Toshiba European drive page you would see that there is a special BIOS update for Win XP!!!!
    This would mean that you should update the BIOS if you would like to use the XP on this notebook!
    Regarding your driver question;
    > Audio Device on High Definition Audio Bus - but my sound is working
    I've got this yellow exclamation mark too. It's normal with Win XP but if you want check this advice:
    You have to install firstly the MS patches: KB835221and KB888111.
    Then remove the Audio Device on High Definition Audio Bus from device manager and restart the notebook again.
    Possibly you will have to install the sound driver again.
    > Video Controller (VGA Compatible)
    This device requires the graphic card driver
    Check if you could use the XP driver released for one of these models:
    Equium A200 PSAE8E
    Equium A210 PSAENE
    Equium P200 PSPB8E
    Satellite A200 PSAE6E
    Satellite A210 PSAELE
    Satellie P200 PSPB6E
    Satellite P200 PSPBQE
    Satellite Pro P200 PSPB7E
    Satellite Pro A200 PSAE7E
    > PCI Memory Controller
    You need to install the Texas Instruments Flash Media Driver
    Bye

  • Satellite Pro L40 - Can't install XP and reinstall Vista too

    I have formatted my harddrives to install XP pro.
    And when I tried it didnt work so I tried to re install Vista and it goes to a blank screen after getting stuck at the completing installation phase?
    Any ideas, any help will be greatly appreciated .

    sorry i have a sattilite pro l40
    8ogb hardrive ,1.5gb ram
    with the xp it says that it cannot find any hardrives and to ensure they are powered up correctly,what i would like to to just have vista back and i am using a microsoft disk to do this although this was given to me so not sure if the disk is anygood or not.it just quite confusing as it completes the install apart from the very last stage?

  • Satellite Pro L40 wont boot after changing BIOS settings

    Alright changed a few settings in the bios last night and now when I boot I get a black screen lights flash and that hard drive light comes on but nothing on screen.
    There was no password on bios,... how would I reset BIOS to normal?
    I put a windows disk on I can hear the disk spinning but nothing on the screen
    (I think I have come to the right place on the forum)
    Its a Toshiba Satellite Pro L40 model psl4be.
    Thanks

    >There was no password on bios,... how would I reset BIOS to normal?
    You can set the BIOS to default ONLY inside the BIOS so you have to access the BIOS pressing F2 or at the beginning of the booting order
    But I doubt that this problem is related to the BIOS.
    Maybe its just a simple bad luck that this issue happened just exactly after changing something in BIOS.
    Try to connect an external monitor and check if you can see something on 2nd display.

  • Satellite Pro L40 wont start

    When i turn on my Satellite Pro L40 it shows me a screen asking me to start windows repair or start windows normally.
    When choosing either option it leads me back to the same screen.
    Does anybody have any ideas?
    Many thanks

    Hi Will
    For me it looks like the installed OS was muddled up for non apparent reason
    If you are not able to boot in the Windows XP OS and if the repair option doesnt help to boot in the safe mode I dont see any other possibility as to boot from the Toshiba recovery CD and to reinstall the operating system again!
    But note; the booting from the recovery CD will format the whole HDD and you will lose all files stored on the HDD. ?
    This is a drastic procedure but in my eyes its the only one which could helps to solve this issue.
    Greets

  • As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    Against TOU which you "agreed" to in order to post in these user to user forums.  If you want to "suggest" something to Apple, do so in the Product Feedback area.

Maybe you are looking for