Satellite Pro L510 - Can't install and start Intel Link 5100

Hi,
I have a Satellite Pro L510 (P/N:PSLFML-002004). Recently, I have updated my WLAN to Intel Link 5100 (my original WLAN is Realtek RTL8191SE). I've tried Windows 7 32bit and 64bit with intel driver, version 13.4 and 13.5, non of them has worked so far. I always get this error "This device cannot start" from Device Manager
Can anyone help me with this problem, please?
Duy

Hello
> My old WLAN works normally before the upgrades
So I think this WLAN card is not compatible. Not all WLAN cards are compatible with all notebooks. I think this also depending on the mainboard and BIOS
Installing another WLAN card will not improve the range or speed. For example if you use draft N you have 300 Mbps with every WLAN card and the WLAN range is depending on the WLAN antennas and not WLAN card itself.
In your case I would install the old one and be happy with it ;)

Similar Messages

Satellite Pro L500 - Can't install Realtek LAN driver

Hi All,
I have recovered a Satellite Pro L500 Windows 7 pro with disc created from notebook, but now can't install a Realtek LAN driver for the notebook.
The software driver installer dosn't seem to run correctly all the time, have tried several times to install, with only once a realtek "repair" option becoming available.
When I did manage to install driver I got a error "device failed to start". after recovery I also had problems with a "PCL simple communications controller driver",
which seems to have been a Intel MEI according to the VEN, DEV info displayed in systems info.
Are these problems related and how do I Install the required driver in a automated system if the system won't detect the hardware correctly?

Have downloaded from many sources the correct driver, but the motherboard or the OS is not discovering the network adaptor so even if the driver is installed the divice is not recognised as being there(physically installed). when installing the driver software i get the error from the realtek installer "Realtek network controller was not found. If in deep sleep mode is enabled please plug the cable". have no idea what or how deep slee is enabled and have reset bios settings to default and have reset cmos.

Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
-What to do?
CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
Best regards
/peter

Hi Peter,
Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

Satellite Pro A100 - Can't install sound driver

Hello,
Hope someone can help, I'm having trouble getting a sound driver to work, I've tried quite a few different drivers now and none seem to work.
I've tried all the drivers off the Toshiba driver download site with no luck. I'm still left with a yellow question mark in device manager. (Satellite Pro A 100) During the installation the window appears that i must instull MICROSOFT BUS DRIVER BEFORE this audio drive r(Realtek HDA for XP).
Where can I get this driver(Appreicate if someone could point me in the right direction), or somebody can give me another usefull advice?
Appreciate any help
Thanks.

I think this is a known issue.
Sometimes its useful to search in the Microsoft Knowledge Base. There I had found these interesting documents:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Its very important to install these hotfixes before you install the driver.

Satellite Pro S300L - Can I install Windows 7?

Can I install windows 7 on my Satalite pro s300L if so which version 32 or 64 Bit?

Hello
First of all you can install what you want.
Why?
Its your notebook and you can do what you want with it! ;)
In my opinion its depending on the RAM which version you should install If you use 4GB or more RAM, choose the 64bit version. Otherwise 32bit is enough and therefore you can get all drivers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Re: Satellite Pro C50 - Can't install Windows 8

Hi.
I have a Toshiba Satellite Pro c50 with Windows 7 preinstalled.
It comes with 2 DVD's containing Windows 8.
I have tried to upgrade to Windows 8 (following the instructions included in the manual: BIOS changes, etc) but I cant install it.
After booting from the DVD, it doesnt appear the Windows 8 install utility, but the Windows 7 recovery options .
Could you please help me?
Thanks in advance,
Sergio

Exactly the same problem.
Toshiba Portege R-930.
Comes with Win 7 preinstalled and 2 CDs with image of Win 8 (Win 8 sticker on bottom of the laptop).
Followed the directions in the leaflet to upgrade to Win 8 (change in BIOS, etc.) like the user above.
It gets only to a blue screen with two options:
1) Toshiba recovery - a frightening black screen with warning that every data will be lost) and
2) System recovery, getting nowhere but to "switch off computer".
At one point got the message that the disc is locked.
Gave up, returned safely to Win 7.
If someone could explain how to do this properly,
Thanks
Ket

Re: Satellite Pro U200 - Can't install HDD protection Utility?

hi
Knows somwonw why I cannot install:
18/08/08
HDD Protection Utility
Toshiba Windows Vista 32 Bit 2.0.0.7 World Wide
on my Satellite Pro U200 PLUA1E-02802QS4 with Vista Business 32-bit?

All Toshiba stuff available on download page is the same as in recovery image.
All tools are tested and I don't see any reason why you should not be able to install this utility.
Is some error message shown?

Satellite Pro M70 - Can't install Toshiba Power Saver Driver

Hi, I can't install toshiba power saver driver on my laptop because instalation crashes with error 1610: The configuration data for this product is corrupt. Contact your support personnel. I tried more versions of power saver driver. I got latest official chipset driver..Know somebody how to fix that?
My second problem is with battery, my laptop running on battery for max 10 minutes (i got my laptop 2 years) and i dint using battery supply often. Can battery loose so much capacity in 2 years even if i used to my battery once a week?
Sorry for english and thx for reply

I believe you must not install this driver, only Power saver utility only.
What to say about battery? In my opinion it is possible. In my opinion the battery life time cannot be defined so easy.
Some batteries run well after 3 years of usage and some of them are death after one year only.

Satellite Pro L40 - Can't install XP and reinstall Vista too

I have formatted my harddrives to install XP pro.
And when I tried it didnt work so I tried to re install Vista and it goes to a blank screen after getting stuck at the completing installation phase?
Any ideas, any help will be greatly appreciated .

sorry i have a sattilite pro l40
8ogb hardrive ,1.5gb ram
with the xp it says that it cannot find any hardrives and to ensure they are powered up correctly,what i would like to to just have vista back and i am using a microsoft disk to do this although this was given to me so not sure if the disk is anygood or not.it just quite confusing as it completes the install apart from the very last stage?

Firefox won't open and won't uninstall so I can re-install and start anew. HELP!

I'm on a Dell laptop with Windows Vista using the latest version of Mozilla Firefox. My son was playing a game online (addicting games website I think) and the whole game screen didn't show up, he had to scroll. I went to the top of the page and right clicked and closed the address bar and menu bar so they weren't in the way. I've done this in the past and it worked fine. Not this time! When I went back to put those bars back on I couldn't do it. I had no address bar, no forward, back, refresh and home buttons, no file, edit, view buttons etc. I looked in my internet settings and all over the place and couldn't figure out how to replace those bars. I uninstalled Firefox and reinstalled it but those bars still were not there. I did this again after deleting browsing history (cookies and all) in case this problem was saved in my preferences. Still, no bars or buttons. I tried to uninstall again but now it won't even uninstall! It stubornly stays right there! It also won't even open now! I click on the icon and it sits. I right click the icon and hit open and it sits. I'm dead in the water. I can't even sign in to Pogo anymore because IE crashes everytime. I hate IE.....HELP!

Right... Back to square one.
- Open Internet Explorer, go to "www.mozilla.com" and download the installer for Firefox 3.6.12 and save it to your desktop.
- To uninstall Firefox, first make sure no "firefox.exe" processes are running on your machine: Open the task manager (invoke it by pressing ctrl-alt-del and choosing the appropriate option), click on the "Processes" tab, click on the heading "Name" to sort all running processes by name.
Scroll down the list and right-click on the first "firefox.exe" process picking the "Kill process" option. If there's more than one of them, repeat for all instances of "firefox.exe".
- Now go to the directory C:\Program Files\Mozilla Firefox\uninstall and double-click "helper.exe". This should uninstall Firefox completely.
- Now we're in for the hard part: Go to C:\Dokuments and Settings\[Your User Name]\Application Data\Mozilla\Firefox\Profiles. That's where your profile resides. Unless you're using the Profile Manager, chances are you're seeing just one directory "[random string],default". (In my case it's called "4sr92zjz.default", f. ex.).
If you got any bookmarks you'd like to keep, open this folder, find the file "places.sqlite" and move it to your desktop.
Now delete the entire contents of your profile folder--you'll need to configure firefox anew. Do keep this window open, you'll need it again in a few moments.
Go to your desktop, run the installer, start Firefox once, close it again and move your "places.sqlite" file from your desktop to your profile folder.
Now double-click Firefox and reconfigure it according to your preferences.
N.B.: Do get "MozBackup". With this application you're able to save and restore a working Firefox profile--for your next mishap ;-)

How can I install and run a Windows program on my MacBook Pro/?

How can I install and run a Windows program on my MacBook Pro?

You have several options.
1, Use a Virtual Machine like Vmware, Parallels etc... to Create a Virtual Windows Installation and Run your program in there. A Virtual MAchine will runn in a Window on your Desktop and share your Mac's resources RAM HD space processor. Your MAc desktop will still be available while you run Windows install.
http://www.parallels.com/
2. Install Windows on a partition using Bootcamp. It will run a full installation of Windows you can boot into, and run your programs. The Mac desktop will not available until your reboot the computer and start in OSx instead of Windows.
https://www.apple.com/support/bootcamp/
3. Use Wine / Winebottler to run the Application without the need for a complete Windows installation.
http://winebottler.kronenberg.org/

Satellite X200-245 can i install a second HDD

on satellite X200-245 : can i install a second hard drive ?
is it possible ?
There is a place for it but no sata connection on the mother board where can i find this connector

No you cannot install the second HDD because there is no HDD connector which would allows to connect the HDD to the mobo.
And No, its not possible to upgrade the mobo with such connector.
The X200 has the two HDD bays because some X200 support 2 HDDs and some dont support it.
Your X200 doesnt support 2 HDD

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

Satellite A200-137 - Can not install windows after hard disk crash

last week my a200-137 crashed and now i have new hitachi 500 gb hdd on it, same as before the crash.
I install with Toshiba recovery DVD windows Vista on it and after succesfull install i have to start windows, it says preparing windows for first use then i have to wait a moment and then i get the message that windows installation is not completed. But it is complete!
After trying for 3 times installing with recovert I tried to install windows xp.
After a couple of minutes and transering files, I get the message no disk found! It says that there is no hard disk on the laptop!
But when I start up the boot menu or the setup menu I can see the 500 gb Hitachi hard disk!
So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?

> So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?
On this virtual way it is not easy to say why you cannot install recovery image. It would be interesting to know if the same will happen when you replace HDD with the same or identical one.
Which capacity has had original HDD?
If possible try to obtain original Microsoft installation disc and check if HDD will be recognized by Vista or Win7 and of course if you will be able to install and start preinstalled OS.
About WXP installation: it is well known that WXP installation will not starts properly due to missing SATA driver that must be loaded before WXP installation starts.
Check this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

Satellite Pro L510 - Can't install and start Intel Link 5100

Similar Messages

Maybe you are looking for