Satellite Pro L670-18F PSK3FE Webcam stops working become "Unknown Device"

The *webcam* on my *Satellite Pro L670-18F PSK3FE* which is running *Windows 7 64-Bit* worked fine until this week. My notifications bar started to say *"unknown USB device"* and when when I went to use the webcam it was no longer working.
When I turned the webcam off in the BIOS the notification stopped but when I turned it back on the notification kept coming up again. The unknown device is clearly the webcam.
I have updated my BIOS and tried system restore.
I have also downloaded the driver for the webcam from http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have been trying to run that - +but it NEVER seems to finish installing!+ I will keep trying to reload the driver and see if that helps but as of now I do not believe that the driver will help.
If this is only a driver problem could someone suggest how I get the driver to actually install :-(
I am now at a loss. I am unsure what to do now. Suggestions?... +please!+

Hi
Unknown device means that the driver is not installed.
I think the webcam driver installation should fix this.
Since the face recognition use the webcam too, I recommend uninstalling this tool as well as the old version of webcam software.
Both (or just face recognition) should appear in control panel -> software
Now download the both applications from the driver page.
Start with webcam driver installation:
1) Unzip the webcam driver package
2) The TC30049700N.exe can be unzipped too (right click -> extract here)
3) Now you should see different files exe, dll, and others try to execute the setup.exe to start the installation. If this does not work, go to device manager, mark the unknown USB device (webcam) and install the driver pointing to the extracted folder containing the webcam driver files. The system should pick up the dll files automatically.
4) Reboot the notebook and follow with face recognition software.
Good luck

Similar Messages

Satellite Pro L300 - WLAN connection has stopped working

FN+8 indicates that the wireless is on as the icon shows but suddenly tonight the connection has failed while I was browsing the internet and I can't get it back.
I have reset the modem - the laptop is currently connected by ethernet cable to the same modem with a good connection. The laptop is about 16 months old and is running Windows 7 Pro. I've updated all drivers tonight but even though it's "on" it isn't working.
Will dig out the wireless usb modem tomorrow but I'm wondering if the card has given up :(
null

Yes it was listed. Oddly enough when I booted it the next day the wireless kicked in straight away. Go figure!
Talked to a friend who repairs puter's in the US and he's told me that if it happens again to reset the wireless card - preferably without the two wires disconnecting from the card. I'm used to doing hardware and software upgrades with towers - time to learn about laptops :)
Thanks for posting a reply xaver :)

Satellite A300-1G5: webcam stopped working - Webcam driver open fail

Hi
my laptop specifcation here : ( [A300 - 1G5|http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new=Yes&PRODUCT_ID=1055589] ) for any needed details ..
The problem simply is, the webcam stopped working for some reason, an error messeage says "Webcam driver open fail. Please restart camera or computer".
I noticed that whenever I put the computer in sleep mode I was getting on the icon tray a notification says "USB device unrecognized"... I wasnt aware what it was - thought it becasue of the USB mouse being plugged... but I think its related to the camera...
software is installed but camera is not working and cant enable it .. I did download the latest driver from toshiba site , but still not working ...
Currently my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall Enabled, Windows UAC enabled, Kaspersky Ani-Virus 2009 Enabled. I only use Windows Live Messenger (which up to date I think , version : 14.0.8089.726) which i used camera with, I quite using face recognition long time ago and rarely use the webcam ... I didnt install or update any drivers and used to have the laptop running perfectly..
So what happened now ?!

Hi
I have had a similar error message and could solve this by disabling the webcam software from startup.
In msconfig -> Start Up tab I have unchecked the Chicony webcam software.
This prevents it from automatic loading.
I dont use MSN but Skype and the Chicony webcam software is always disabled (not executed) if Skype is running.
Maybe you should try this too.
Furthermore you could try this:
Go to device manager, mark the webcam (imaging devices USB video device) and deleted it from the device list.
Then reboot the notebook and wait until the webcam has been recognized again.
Then test it.

New Satellite Pro L670-14M won't turn on unless the charger is plugged in?

Hi All,
New to the forum so would be grateful for any help on this matter.
I purchased a Brand New Satellite Pro L670-14M laptop last week. Now it has been working fine up until today. The last time I used it while just running off the battery was monday evening. I was working on the laptop sending email etc today, and I decided to move rooms. For a reason I have yet to discover I unplugged the charger from the wall (instead of just unplugging the charger from the laptop) while it was plugged into the laptop and the laptop just switched off much to my shock. The was no sparks that i saw from the outlet as i removed the plug but now the laptop will not switch on unless the ac power supply is connected. If i unplug the charger the computer will not turn on.
Now my first thought is that i have (crossed the beams) killed the battery, but the strange thing is, when the laptop is plugged in and turned on and I'm on my desktop screen and i click on the battery icon in the taskbar it states '94% available (plugged in, charging)
While I wait hopefully for some responses I will turn the laptop off and leave the charger plugged to see if the battery has charged beyond 94%

Hello
I think BIOS update would be worth a try in your case. Have a look on Toshiba driver download page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
But before you start the update: Make sure you are logged in as Administrator and close all running programs. Unzip all files from zip archive firstly.
After successful BIOS update load the default settings in BIOS.
Do you use original Toshiba battery and AC/DC adaptor or are they 3rd party parts?

Webcam stopped working for one user, still works for another user

I'm using 2 userprofiles on my laptop.
For 1 user, webcam software works as expected.
For 2nd user webcam stopped working.
For this user:
- Autostart Webcamsoftware doesn't work (traybar).
- Manual start doesn't work either.
- I can see that for each attemt, conhost.exe is started but no traybar.
- In systray i see the icon appearing but after some secs, it disappears.
- In syslogs, following error is shown:
Naam van toepassing met fout: traybar.exe, versie: 1.5.4002.79, tijdstempel: 0x46e9fe5c
Naam van module met fout: traybar.exe, versie: 1.5.4002.79, tijdstempel: 0x46e9fe5c
Uitzonderingscode: 0xc0000005
Foutoffset: 0x00001410
Id van proces met fout: 0x16f8
Starttijd van toepassing met fout: 0x01ccecdf12fc5566
Pad naar toepassing met fout: C:\Program Files (x86)\Camera Assistant Software for Toshiba(2.0M)\traybar.exe
Pad naar module met fout: C:\Program Files (x86)\Camera Assistant Software for Toshiba(2.0M)\traybar.exe
Rapport-id: 5a545dcd-58d2-11e1-9c2d-463500000031

I use my laptop for both private and office. Therefore i created a userprofile for home and another for the office.
Both userprofiles have different settings/desktops/etc.
Meanwhile i did the following:
- boot and logon with primary profile (working webcamsoft)
- uninstalled the program
- used CCClean to cleanup registry (and other stuff)
- reboot and logon with secondary userprofile
- used CCClean to cleanup registry (and other stuff)
- reboot and logon again with primary userprofile
- install the webcam software
- reboot and logon with primary userprofile
- test webcamsoft, it works
- reboot and logon with secondary userprofile
- webcam still doesn't work
any suggestions???

Adobe premiere Pro CC 2014.2 has stopped Working

Hey guys,
I can start up my premiere pro CC 2014 but as soon as I choose a project to open, it loads for a second and then I keep getting the same error window that says: Adobe premiere Pro CC 2014.2 has stopped Working
My computer:
Processor: Intel Core i5-2500K CPU @ 3.30Ghz
GPU: AMD Radeon HD 7800 Series
RAM : 16GB
Motherboard: Maximus IV Gene Z
Windows 7 Ultimate - Service pack 1
All my drivers are up to date. If you could help me solve this problem I would be most appreciative!
I have checked the event viewer and found these results:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Adobe Premiere Pro.exe
P2: 8.2.0.65
P3: 5486db4a
P4: atig6txx.dll
P5: 8.14.1.6413
P6: 546e9ebb
P7: c0000005
P8: 00000000000122bf
P9:
P10:
Attached files:
C:\Users\Ki.Vol-Opt\AppData\Local\Temp\WER9C7D.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Ki.Vol-Opt\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_543ba1a98f4ca1ae4f8ea45cfad084579dcc63_0efac014
Analysis symbol:
Rechecking for solution: 0
Report Id: f87a347b-9569-11e4-b338-c86000246990
Report Status: 1
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-06T06:05:20.000000000Z" />
<EventRecordID>24436</EventRecordID>
<Channel>Application</Channel>
<Computer>Vol-Opt</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>Adobe Premiere Pro.exe</Data>
<Data>8.2.0.65</Data>
<Data>5486db4a</Data>
<Data>atig6txx.dll</Data>
<Data>8.14.1.6413</Data>
<Data>546e9ebb</Data>
<Data>c0000005</Data>
<Data>00000000000122bf</Data>
<Data />
<Data />
<Data>C:\Users\Ki.Vol-Opt\AppData\Local\Temp\WER9C7D.tmp.WERInternalMetadata.xml</Data>
<Data>C:\Users\Ki.Vol-Opt\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe Premiere P_543ba1a98f4ca1ae4f8ea45cfad084579dcc63_0efac014</Data>
<Data />
<Data>0</Data>
<Data>f87a347b-9569-11e4-b338-c86000246990</Data>
<Data>1</Data>
</EventData>
</Event>

I have a video assignment due this week and I really don't want to have to restart my project on different editing software. I am going to have to ask for a premiere pro refund for this month if I can't get it to work. The software was working fine until 3 days ago. Please help - thanks!

Adobe Premiere Pro CC 2014.0 has stopped working & Adobe QT32 Server CC 2014.0 has stopped working

Hello,
I just installed Adobe Premiere Pro CC 2014 as trial to see if its working on my system but as soon as i launch it, it crashes with the following errors on splash screen: Adobe Premiere Pro CC 2014.0 has stopped working followed by Adobe QT32 Server CC 2014.0 has stopped working.
System Info:
Windows x64 bit
16GB RAM
Intel Core i7-4770 CPU @ 3.40GHz 3.39GHz
NVIDIA GeForze GTX 660 (fully updated)
I turned off Windows 7 Sync Center (suggested in adobe forums) but it didn't help.
I tried running it as administrator, and playing with the permissions but nothing helped.
Please help me with my problem.
Thank you,
James

I have the same problem too.
I try format pc ans reinstall win7 64 bits totally clean, but nothing...
Drivers are update, intel i7,nvidia gtx 760,all works fine in all aplications and games.
When open media encoder or premiere or after effects crash is startup and show message adobeqt 32 stoped.
The sp1 are install too.
I think what adobe cc 2104 fails hards and adobe needs fix this.
The solutions how reinstall or update drivers not work, fix a problem please.

"Adobe Premiere Pro CC 2014.1 has stopped working"

I'm on a Windows HP ProDesk PC trying to open a file from my external hard drive that I created on my Macbook Air laptop. When I open the file, I'm able to get past the window that says it's locating the media, it loads the sequence timeline, it loads the project assets panel, and then it crashes: "Adobe Premiere Pro CC 2014.1 has stopped working."
I've tried running Premiere in compatibility mode (setting to Windows Vista and Windows 7), but that yields the same results. I'm going to attempt to update the graphics card driver to the latest update to see if that does the trick.
I'm running:
Windows 7 Professional, Service Pack 1
Intel Core i5-4570 CPU @ 3.20 GHz
64 Bit Operating System
Intel HD Graphics 4600
Any assistance would be greatly appreciated!

No guarantee that this will work for you, but I went to Intel's website (Intel® Driver Update Utility for graphics drivers) and downloaded the updated driver software. Hope that helps!

Premiere Pro CC slows down, then stops working, then won't work, then it won't quit

Premiere Pro CC slows down, then stops working, then won't work, then it won't quit. So I have to force quit every time.
It does not matter if I am working with HD or 4K - same thing happens.
This began happening about a week ago. Nothing really new has changed. I tried to repair permissions and check this from a new admin account because I know that is what Adobe thinks the answer to every problem is. But it did not change anything.
Mac 10.10.2
3.5 ghz 6-core
Dual D700
16GB Ram
CC 2014

Used this tip from Adobe and it worked, all running quick and smooth again.
Hope it works for you too.
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/

Premiere Pro CC 2014.0 has stopped working

I have Premiere Pro CC 2014.0 installed
I can't install 2014.0.1 because it's simply not available despite being told the contrary from Adobe Communities moderators.
I'm using Windows 8.1
There is no actual error message from premiere, the message comes from Windows Problem Reporting which states: "Adobe Premiere Pro CC 2014.0 has stopped working... A problem casued the program to stop working correctly. Windows will close the program and notify you if a solution is available."
This error occurs during the launch of Premiere Pro.
This problem began to persist yesterday. It occurs while no other programs are running. I am running no third party codecs or add-ons to Premiere Pro.
Here is the AMT3 log file:
It's not letting upload this information.
The contents of this file suggest premiere pro is trying to return values in regard to license keys... So, I signed out and signed back in. I started Premiere and it asked me to sign in, I clicked sign in and it logged me in automatically... its said thanks then disappeared... It then brought up a dialogue saying I had 00 days left on my trial. It then went away and asked me to sign in again... I signed in and it said thanks and went away and started to load... Then the same thing happened : I get a white screen and a Windows Problem Reporting that Premiere Pro has stopped working.

I have an enterprise subscription through Tulane University. Here is the amt3 log if it lets me upload this time.
09/11/14 14:53:15:976 | [INFO] | | | | config | | | 7956 | Using default media policy RET
09/11/14 14:53:15:979 | [INFO] | | | | AMT | | | 7956 | AMTImpl::AMTRetrievePersonGUIDWithAuthSource PersonGUID is : 48AD623B4FA80E1B0A490D44@AdobeID
09/11/14 14:53:15:979 | [INFO] | | | | EULA | | | 7956 | 48AD623B4FA80E1B0A490D44@AdobeID
09/11/14 14:53:15:979 | [INFO] | | | | EULA | | | 7956 | V7{}PremierePro-8-Win-GM
09/11/14 14:53:15:980 | [INFO] | | | | LicenseAgreementLog | | | 7956 | Called GetLicenseAgreementDetails
09/11/14 14:53:15:980 | [INFO] | | | | LicenseAgreementLog | | | 7956 | Called IsLicenseAgreementAccepted
09/11/14 14:53:15:980 | [INFO] | | | | LicenseAgreementLog | | | 7956 | passed type in IsLicenseAgreementAccepted 1
09/11/14 14:53:15:980 | [INFO] | | | | LicenseAgreementLog | | | 7956 | passed dguid in IsLicenseAgreementAccepted 48AD623B4FA80E1B0A490D44@AdobeID
09/11/14 14:53:15:980 | [INFO] | | | | LicenseAgreementLog | | | 7956 | passed driverleid in IsLicenseAgreementAccepted V7{}PremierePro-8-Win-GM
09/11/14 14:53:15:981 | [INFO] | | | | LicenseAgreementLog | | | 7956 | passed version in IsLicenseAgreementAccepted 1000
09/11/14 14:53:15:982 | [INFO] | | | | LicenseAgreementLog | | | 7956 | Successful in searchDocForAgreement, returning the child element
09/11/14 14:53:15:983 | [INFO] | | | | LicenseAgreementLog | | | 7956 | foundXmlElement in IsLicenseAgreementAccepted
09/11/14 14:53:15:983 | [INFO] | | | | LicenseAgreementLog | | | 7956 | outstatus being returned from IsLicenseAgreementAccepted is 0
09/11/14 14:53:15:983 | [INFO] | | | | LicenseAgreementLog | | | 7956 | return status from IsLicenseAgreementAccepted is 0
09/11/14 14:53:15:983 | [INFO] | | | | LicenseAgreementLog | | | 7956 | return status from GetLicenseAgreementDetails is 0
09/11/14 14:53:15:984 | [INFO] | | | | uiswitch | | | 7956 | EULA has already been accepted.
09/11/14 14:53:15:984 | [INFO] | | | | AMT | | | 7956 | This is a subsequent launch. Deferring services.
09/11/14 14:53:15:984 | [INFO] | | | | performance | | | 7956 | AMTObtainProductLicense took 95.203712 ms
09/11/14 14:53:15:984 | [WARN] | | | | AMT | | | 7956 | AMTGetParentLEIDLicenseStatus called.
09/11/14 14:53:15:985 | [INFO] | | | | SLCoreService | | | 7956 | Starting up SLCore 2.0 Release (build 2.0.1.360321).
09/11/14 14:53:15:985 | [INFO] | | | | SLCoreService | | | 7956 | Service construction took 0.1 ms and succeed.
09/11/14 14:53:15:985 | [INFO] | | | | AMT | | | 7956 | Parent LEID not passed Relying on Licensing LEID V7{}CreativeCloudEnt-1.0-Win-GM
09/11/14 14:53:15:985 | [INFO] | | | | SLCoreService | | | 7956 | Syncing to license store...
09/11/14 14:53:16:049 | [INFO] | | | | SLCoreService | | | 7956 | Found server mkey.
09/11/14 14:53:16:066 | [INFO] | | | | SLCoreService | | | 7956 | Loading license references...
09/11/14 14:53:16:068 | [INFO] | | | | SLCoreService | | | 7956 | Found 2 license file(s)
09/11/14 14:53:16:083 | [INFO] | | | | SLCoreService | | | 7956 | Parsing license file [10436989.lc2] succeed.
09/11/14 14:53:16:099 | [INFO] | | | | SLCoreService | | | 7956 | Parsing license file [243157053.lc2] succeed.
09/11/14 14:53:16:099 | [INFO] | | | | SLCoreService | | | 7956 | License store synchronization took 114.5 ms and succeed.
09/11/14 14:53:16:101 | [INFO] | | | | SLCoreService | | | 7956 | Query license: type = 5, duration = 1122 days, remaining = 1121 day(s) 14803 seconds.
09/11/14 14:53:16:101 | [INFO] | | | | PCCheck | | | 7956 | Royalty Bearing found.
09/11/14 14:53:16:101 | [INFO] | | | | PCCheck | | | 7956 | Protected Content found.
09/11/14 14:53:16:101 | [INFO] | | | | PCCheck | | | 7956 | Breaking Out!
09/11/14 14:53:16:101 | [INFO] | | | | AMT | | | 7956 | Return Code 3
09/11/14 14:53:16:101 | [INFO] | | | | performance | | | 7956 | AMTGetParentLEIDLicenseStatus took 117.028931 ms
09/11/14 14:53:32:720 | [WARN] | | | | PCDService | | | 7956 | Failed to remove key [LD_SESSION] in hive [976087041428704252227960]from cache : 769
09/11/14 14:53:32:721 | [DEBUG] | | | | PCDService | | | 7956 | No value for key [AdobeUpdaterCodeV2] in hive [{07BE616F-9E42-4C90-AF4F-0F32A5B088E7}] in master : 10
09/11/14 14:53:32:721 | [DEBUG] | | | | PCDService | | | 7956 | No value for key [AdobeUpdaterCodeV2] in hive [{07BE616F-9E42-4C90-AF4F-0F32A5B088E7}] in master : 10
09/11/14 14:53:32:721 | [DEBUG] | | | | PCDService | | | 7956 | No value for key [Updates] in hive [{07BE616F-9E42-4C90-AF4F-0F32A5B088E7}] in master : 10
09/11/14 14:53:32:721 | [DEBUG] | | | | PCDService | | | 7956 | No value for key [Updates] in hive [{07BE616F-9E42-4C90-AF4F-0F32A5B088E7}] in master : 10
09/11/14 14:53:32:721 | [WARN] | | | | AUMService | | | 7956 | config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
09/11/14 14:53:32:721 | [DEBUG] | | | | ServiceLoader | | | 7956 | looking for library C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\updaternotifications.dll
09/11/14 14:53:32:722 | [DEBUG] | | | | ServiceLoader | | | 7956 | Found library C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\updaternotifications.dll
09/11/14 14:53:32:722 | [INFO] | | | | SLCoreService | | | 7956 | Shutting down SLCore 2.0 Release (build 2.0.1.360321).
09/11/14 14:53:32:755 | [INFO] | | | | SLCoreService | | | 7956 | Service destruction took 32.8 ms and succeed.
09/11/14 14:53:32:755 | [INFO] | | | | performance | | | 7956 | AMTReleaseProductLicense took 35.584194 ms
09/11/14 14:53:32:755 | [INFO] | | | | AMT | | | 7956 | END SESSION.

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?

Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.

Premiere Pro CC 2014.1 has stopped working

Here is the message I receive:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.1.0.81
Application Timestamp: 5426694c
Fault Module Name: MXF_SDK_4.4.33_vs10.dll
Fault Module Version: 4.4.33.0
Fault Module Timestamp: 534d772c
Exception Code: c0000005
Exception Offset: 00000000000bdc55
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 8535
Additional Information 2: 8535b7c2559674464ddf08509fefe6b0
Additional Information 3: 10af
Additional Information 4: 10afa115ca3f79009d0573e10a7cefff
It either happens right away or after I load an image to the timeline. I've tried uninstalling and re-installing Premiere Pro twice and updating my Intel driver (it didn't need to be updated).

Hi Cindyh925,
Please check the forum discussion link below and follow the steps.
Premiere Pro CC 2014.1 has stopped working - Win 7 64 bit
Regards,
Vinay

My USB webcam stopped working after I upgraded to OS X 10.6.8

When I installed the upgrade to OS X 10.6.8 my USB webcam stopped working.
Any idea how to get it back.

Upgraded from what to 10.6.8?
Did it work before?
What camera?

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

In what way is it not working?
Please describe in detail all you have attempted to do in order to resolve the issue.

Which Solid State Hard Disk for Satellite Pro L670?

I have a Satellite Pro L670 which I want to configure for presentation purposes and have to re-load the operating system anyway.
Rather than over-write the existing disk, I thought it would be better to get a second one to fit instead.
Replacing the current (old-fashioned) spinning disk with a solid state one seems to me the best way to go.
Has anyone else fitted a solid state hard disk to a Satellite Pro?
For budget reasons I am planning to go for a 120GB capacity which will be enough.
However I have yet to find out from Toshiba what they might recommend. Anyone else yet gone this route?

Hi
Theoretically any SATA SSD drive should be compatible because the notebook supports an SATA controller.
But in some cases it could be possible that an SSD drive would not be handled properly. In such cases the SDD drive manufacturers provides different firmware updates
So before purchasing an SSD drive check the support pages of SSD drive manufacturers for further details maybe an firmware update would be available

Satellite Pro L670-18F PSK3FE Webcam stops working become "Unknown Device"

Similar Messages

Maybe you are looking for