Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

I recently bought a Satellite Pro L850-1UJ with Windows 8
http://www.toshiba.co.uk/laptops/satellite-pro/l850/satellite-pro-l850-1uj/
I've created a new partition (so i could use it as data room)
i.e. C: the windows system AND Z: my data
after that, i could NOT use the RECOVERY MEDIA CREATOR to create the recovery dvds
BUT the partition still exists and i can see the inside files from windows
IS IT a way to extract the files from the recovery partition or any other clue how i could fix the partition scheme so the RECOVERY MEDIA CREATOR could recognize it
Many thanks for your time...

>I've created a new partition (so i could use it as data room)
This was a mistake
The HDD partition table has been modified and changed which means that the Toshiba recover media creator would not find the essential files in order to create the Recovery disk or recovery USB flash memory stick.
What you could try to do is to reset the notebook back to factory settings.
For this you can use the option called Reset your PC.
Details here:
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
After that the partition table should be set to the same state like at the first day of purchase and you could try to create the recovery disk once again.
Otherwise if this does not help you, the recovery disk could be ordered as mentioned by user xaver

Similar Messages

How to create recovery partition in new(changed) HDD.

my new HP pavilion g4 laptop HDD have crased, then I replce it by HP care. I upload original win 7 by recovery disk(DVD) but when I open my computer it shows only one partition (C drive, there is no recovery partition and HP tool.
So how to creates recovery partition by recovery disk(DVD)...........please help me.

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

Satellite Pro L850 1DR - Problems with Windows 7 Update KB2887069

I am having problems installing Update KB2887069.
It appears to install okay ... invites me to restart ... when I do it says it is configuring ... gets to 7% then starts the restart ... shows it is configuring again ... up to 7 or 9% ... then reports it is failing and restoring ... restarts again ... and that's it ... not installed and reference to Windows Update confirms it has failed.
All the other updates I had today installed okay once I realised KB2887069 was the problem and omitted it from the update.
I'm running Win 7 Prof Serv Pack 1 - 64-bit on a Toshiba Satellite Pro L850 1DR. I use Microsoft Security Essentials as my AV software.
For now I have had to hide the update ... but anyone any bright ideas how to overcome the problem. I have tried Microsoft's site but as yet there are no answers that have provided a solution for me.
Thanks in anticipation!!

I am "replying to myself" on this one so if anyone else has experienced a similar problem they can see what I did to resolve the matter.
I contacted Microsoft and received excellent support ... although it took a long old time (over the course of 3 days) to resolve the problem, the staff at Microsoft knew their stuff and proceeded tenaciously to overcome every obstacle.
I did feel somewhat sorry for them that one little update should result in the need to offer so much commitment to just one customer ... I was also grateful the resolution was achieved over a time when I was not that busy!
Additional Info: I refer above to 3 days ... for those interested, the time was spent as follows:
Day 1: about an hour and a half covering all the basic checks including sfc /scannow etc after which the update would still not install. (I had done these but accepted Microsoft needed to have the opportunity to check the situation for themselves).
Day 2: a technician called me at a pre-agreed time and having done a few more checks decided to re-download Windows 7.1 (over 3 GB ... on my connection that took a long time) and re-install it (without affecting my data, thank goodness ... but again the process of installation took a long time). The technician left me to do all the updating (a further 3-400MB). Time commitment for me about 5 hours ... but I was able to work on other things while the download, install etc was on as long as I kept half an eye on the screen.
Day 3: the same technician called me back (just when he said he would) ... told him I had no problems with updates (incl KB2887069) but was getting a weird message in Outlook when following hyperlinks and also I could not install IE11 for some reason. Both problems were resolved and other tiny matters sorted over the course of one hour.
Summary: problem therefore took up to 7.5 hours of my time to overcome, approximately half of which I was able to turn my attention to other things on another machine. In my view an acceptable investment of time to have the peace of mind of knowing everything is working just as it should be. I was impressed with Microsoft's staff who were as reliable as they were friendly and patient.
Lindsay

How do I create a DVD from an iMovie '08 Project?

How do I create a DVD from an iMovie '08 Project? I followed the directions in the help section but when I open iDVD, my project is "grayed out" and I cannot open it in iDVD.
Rich Rector

In general, in imovie Share to Media Browser or Share to iTunes.
Then open iDVD. Open the Media Browser in iDVD (at bottom right of window). Navigate to your movies and you should see the movie you made. Drag it in to the iDVD project.

Satellite Pro L850 - Curser 'Hang up' and related problems

I have recently bought a Satellite Pro L850 with Windows OS.
When using the Synaptics pad touch pad the cursor tends to hang up in a random fashion on the screen and sometimes disappears completely.
At times the tool tip displays a small rectangle, bisected horizontally with a small arrow head in each half.
The cursor always sticks when this rectangle is present but the rectangle is not always present when the cursor sticks, I have not been able to identify the purpose of this rectangle.
Other problems such as scroll bars moving independently etc. are probably related to the main problem which, if solved, will hopefully cure all. I have not found any settings in the Control Panel to cure the problem.
All pointer and mouse settings are set as defaults except for the cursor location facility.
Any assistance will be most welcome.
Regards TERON

Hi
Did you try to reinstall the touchpad driver?
Please do that
Also the mouse cursors could hangs due to stressed CPU.
Some processes which are running in the background could stress the CPU and this would lead to cursor freezing.

Satellite Pro L850-1P8 PSKG7E - Unable to see any BT devices

Hi
I have a Satellite Pro L850-1P8 PSKG7E- 00C002EN. I initially had a problem with the software recognizing the hardware. Resolved by re-installing the Atheros filter driver. Now everything say it is working and the latest drivers are installed.
I have a phone, a Nexus 7, a car and PV array that all see each other using their BT and will pair.
The PV array links to a PC based application via bluetooth which worked on a previous works Tosh Satellite Pro.
The laptop refuses to see any of the devices despite everything saying it is working properly and all other devices being visible to each other.
BT RFBUS Toshiba 8.0.2005.0
BT RFCOMM Toshiba 8.0.1129.0
BT RFHID Toshiba 8.0.830.0
BT RFUSB Controller 14 Toshiba 8.0.2005.0
As far as I can see there is no BT entry in the BIOS.
I have tried the FN F8 in both states.
Can anyone give me any guidance?

When you want to use BT on your notebook it is important to enable BT module properly. I presume it works with FN+F8. When the BT is on BT manager should start and in the task bar you should see small blue BT symbol.
When you enable BT does this manager start or not? Click on this symbol with right mouse button and choose option Add new connection. Scan the area and I hope your device should be found (enable visible modus).
You are right about BIOS. There is nothing related to BT functionality.

How create 1 dvd with 2 file

how create 1 dvd with 2 file

As you probably know, DVD creation in Compressor and FCPX is very limited – and it only accommodates single tracks.
But there is no reason why you can't put multiple movies on a single timeline in FCP. Separate them with inserted gaps and add chapter markers to provide some level of navigation among them.
Good luck.
Russ

Satellite Pro L850 (PSKG7E)

Dear Toshiba Please be advised that I has installed Windows 10 on the aforementioned model, abeit, that this model is not presented as being compatible with the upgrade, even though the machine is i5 core 64bit and a couple of years old. I have checked both the global list and the UK list and it appears that the L850 range is completely omitted? Is that an error, or is there a specific reason for that? The only slight issue I am encountering at present is with the optical drive, although at the time of writing I am not 100% certain that the issue is with the optical drive because the error message provided by 'windows' refers to the MS installer not being located, which I am yet to further my investigation into that particular glitch. If Toshiba's previous test indicated problems with the 'Satellite Pro L850' and Windows 10 please can Toshiba provide some transparency with an account of such issues, so that I can be forewarned, and roll back accordingly. Otherwise, if this model is considered to be compatible, it may be an idea to update the compatibility listings. Additionally, if my machine appears to be an unusual exceptance, I don't mind providing some user feedback on my experience of Windows 10 on this model, which may be of some help to Toshiba. Please let me know by reply, private message or email. Thank You.

This is actually the forums for Toshiba USA. You may want to contact Toshiba in your region.
The Toshiba Europe forums can be found here.

Satellite Pro L850 (PSK7GE)

Dear Toshiba Please be advised that I has installed Windows 10 on the aforementioned model, abeit, that this model is not presented as being compatible with the upgrade, even though the machine is i5 core 64bit and a couple of years old. I have checked both the global list and the UK list and it appears that the L850 range is completely omitted? Is that an error, or is there a specific reason for that? The only slight issue I am encountering at present is with the optical drive, although at the time of writing I am not 100% certain that the issue is with the optical drive because the error message provided by 'windows' refers to the MS installer not being located, which I am yet to further my investigation into that particular glitch. If Toshiba's previous test indicated problems with the 'Satellite Pro L850' and Windows 10 please can Toshiba provide some transparency with an account of such issues, so that I can be forewarned, and roll back accordingly. Otherwise, if this model is considered to be compatible, it may be an idea to update the compatibility listings. Additionally, if my machine appears to be an unusual exceptance, I don't mind providing some user feedback on my experience of Windows 10 on this model, which may be of some help to Toshiba. Please let me know by reply, private message or email. Thank You.

As far as I know such drivers are offered as optional drivers and you should not install them. Stay with original drivers. Dont update any offered driver via Windows update.
Have you tried to roll back OS to earlier time before this update was installed? If not do it and check functionality.

Novice. Creating a DVD from camcorder - help please..

Hi all,
I am tasked with creating a DVD from some of my dads camcorder tapes. Can anyone provide a simple advice list. I assume that iDVD (which i have never used) will be the software to use?
Look forward to hearing from you helpful and intelligent people out there.
From a complete simpleton.
Kind regards,
Alan

Hello, Alan,
First, you need to determine if these tapes are digital or not. If they are not digital, you will need to convert them into a digital media format that your version of iMovie can accept. (For example, iMovie 6 can accept only DV footage).
Does your dad have the camcorder that he used to record the tapes? If his tapes are not digital, you can connect his camcorder to a digital camcorder and record each tape to digital miniDV tape. I think it is easier to use iMovie 6 for your movie-making, especially if you are thinking about editing this footage, cropping out bad parts, adding titles, effects and/or audio clips. That is why I am recommending recording to miniDV tapes.
Having the original footage on miniDV digital tapes is also a good way to store the originals, takes up very little space.
If his tapes are some other format, post back for info regarding how to proceed,
What version of iMovie do you have? I am assuming that you have iMovie08 since you are posting in iDVD08. As stated, I recommend that you do this project in iMovie 6. If you don't have it on your computer, you can download it here:
http://www.apple.com/support/downloads/imovieHD6.html
And, I recommend viewing this tutorial: http://www.apple.com/support/imovie/tutorial/
Once you have the footage on the miniDV tapes, you can connect your digital camcorder to your computer's Firewire port, open a new iMovie project and import the footage. You should limit each iMovie to about an hour and a half, if possible. A single-layer DVD can hold about 2 hours of content maximum. It doesn't matter what the size of the iMovie is in GB, only its length matters for iDVD.
After you import the footage you want, you can edit the clips and place them on iMovie's timeline in the order you wish. You can choose to add titles, transitions, effects and audio. iMovie has one video and two audio tracks so you can easily see what you are doing. If you want to have different chapters(scenes), you mark them in iMovie. Another advantage of iMovie 6 over iMovie 8 is that you can put chapter markers where you want them, not just at specified intervals.
After your movie is finished, close iMovie.
Open iDVD, create a new project in which to place your movie.
You should do this tutorial before you begin to work in iDVD:
http://www.apple.com/ilife/tutorials/#idvd-create-63
Once you get your first iDVD project ready to burn, do a 'save as disk image' and then burn the actual DVD from the disk image using Disk Utility. You will need to use a good brand of DVD-R disks, such as Verbatim or Maxell. Memorex has been problematic for many, and don't use a cheap store brand. Select a slow burn speed, 4x or less.
That's a brief summary.....
Post back if you need further information! Good luck with your task!

Create a dvd from past project and event moved to external hard drive

i have version 7.04 DVD. Moved several projects and events to external hard drive. How do I go to "existing dvd projects" and create a dvd from a completed past dvd project? do i have to move the project and event back to the iMac hard drive..thanks

A iDVD project contain links to the various elements you have used to make the project. Unless you have actually saved the project as an iDVD Project Archive (an option under FILE in iDVD) which can be a very large file because it actually contains all the elements used in the project with adjusted links, simply moving a project (and/or elements used in the project) breaks all the necessary links. Sometimes you can reestablish the links (iDVD usually gives you a chance to try), but it can't always be done.
Good luck.

Creating a DVD from camcorder video tape

Hi all,
I am tasked with creating a DVD from some of my dads camcorder tapes. Can anyone provide a simple advice list. I assume that iDVD (which i have never used) will be the software to use?
Look forward to hearing from you helpful and intelligent people out there.
From a complete simpleton.
Kind regards,
Alan

The easiest way (if you don't want to do any editing)
buy a dvd player/recorder, connect the video out of the camcorder to the dvd recorder input.

F10 - create video DVD from recorded TV programme

When I try to create a DVD from a recorded TV programme on my Qosmio F10 I get the following message-
"Media in the CD/DVD drive is not writable by Media Center"
I know that the media is writable by the Qosmio under normal windows but under Media Center it doesn't work on any format of DVD - data, video or DVD slide show.
Any ideas?
Tia,
Les

Hi
I found information that the driver upgrade can solve the problem.
Furthermore you can check this links. There useful und interesting news about Media Center.
http://www.fstop-blues.com/2005/04/windows-media-center-tip-burn-dvr-ms.html
http://www.microsoft.com/windowsxp/mediacenter/using/DVD/burntvtodvd.mspx
Bye

Creating interactive DVD from HTML

I want to create interactive DVDs from html. The end product will be a website stored and browsable on the DVD using the remote control to navigate the menus. Can I do this with Encore?

No
Do a forum search for eDVD, since I'm not sure if the link below is current
Sonic/Roxio eDVD
for ADVANCED Content

How to Generate DVD from iMovie 10.0.2

I have just downloaded the latest IMovie 10.0.2, now I noticed iDVD is no longer an option to share from iMovie. So what are my options to get a movie onto a DVD to be shown on my TV like I had before the latest iMovie upgrade? Are there new programs I'm not aware that can help me create a DVD from movies I have download from by video camera to iMovie?

You will need to export as a file from the new iMovie. If you are not able to import that file format into iDVD (it didn't work for me), drag it into your old iMovie version (which should still be in your Applications folder) and export it from there to iDVD. As an alternative, keep using the old iMovie version (which is what I am going to do since the new one does not offer me the many quality settings options).

Satellite Pro L850-1UJ: How create recovery DVDs from recovery partition

Similar Messages

Maybe you are looking for