Satellite Pro M10 Fn-F5 not working after login???

Im hoping someone can help me. Im totally confused.
Im running a projector off of a Satellite Pro M10. The Fn-F5 works perfectly all the way up until the CTRL - ALT - DEL prompt. Even at this point I can still Fn - F5 and flip through the settings. As soon as I login the FN - F5 doesnt do anything? I have removed all the monitors, reinstalled the video card with the latest driver and installed the Device Function key utility from the website?
I am assuming it must be something with the display settings once the user logs in but I cant work it out? I have tried taking the setting down to the basic 16bit and 800 x 600 but it makes no difference?
Any help or pointers would helpful?
Thanks
Mark

Hi
Sorry but you posting is a little be confused.
The FN+F5 combination allows you to switch between display devices. You can choose an external monitor, TV etc.
If you want to use the FN keys you have to install the Driver for Toshiba Display Devices Change Utility (Display Device Change) and the Hotkey Utilities for Display Devices.
These both applications are responsible for the correctly usage of the FN+F5 option.
The display graphic driver has nothing to do with the FN+F5 keys.

Similar Messages

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Satellite Pro M30 graphics card not working when driver is installed

Hi all,
Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
Anyone can help me?
[email protected]

It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

Satellite Pro A10 - some keys not working with new keyboard

Hi all
I hope some1 can help with this
i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
i fitted into my other A10 and all keys work so keyboard is fine.
All works ok with usb keyboard. Had motherboard out all seems ok.
Any help plz
chris....
Message was edited by: widgy

Hi
Why do you think that the motherboard is ok?
Maybe its a keyboard controller issue
Did you check if the cable was connected properly?
In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
Bye

Re: Satellite P305-S8820 - FN key not working after clean install of Windows 7

I have a problem with a Satellite A210-103. After installation of Toshiba Value Added Package (Flash Cards Support Utility not available for A210), reboot, restarting Toshiba Flash Cards and pressing the FN key several times the problem still exists.
It must have other reasons why so many user have problems with the FN keys.
John

I have searched for A200 and A210 in the Toshiba sections of Equium, Satego, Satellite and Satellite Pro but their are no Flash card support utility. In the details of the "Value added package" are the words:
"TOSHIBA Flash Cards provides the Hotkey function and the launcher function that starts the Hotkey function and launches the other TOSHIBA utilities"
So I think it's useless to search for this utility. It's more important for me to know which files (like name of the launcher program) must be started to use the FN keys.
John

Satellite P305-S8820 - FN key not working after clean install of Windows 7

Hi,
I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I have loaded the Toshiba value added driver pack and the trackpad driver but still cannot get the trackpad or the FN key to work.
Any ideas?

Hello John
You are like other millions other users and what you can read is relevant for you but sometimes it works a little bit different. For you it can be useless but sometimes it helps. Fact is that this utility is offered for some notebook models.
Generally speaking you are right and after VAP installation the job should be done but Ive faced the same problem in the past. Sometimes it works well and sometimes not. You will not believe me but in the past I used stuff for Satellite P300 to get all stuff working on Satellite A350. I cannot explain why this happen and it sounds crazy but it is the truth.
You can also try to play a little bit with VAP installation. Try to install VAP for A300/A350/P300. Generally speaking it is the same and if this will not work well you can remove it from the system.
Launcher for flash cards? It must be listed in MSCONFIG > startup > TcrdMain.exe

Keyboard on Satellite Pro A300-10Q is not working

I have a Satellite Pro A300-10Q running XP.
The function keys weren't working so I downloaded Common Module and Hot Key Utility.
After that the touch pad mouse and keyboard stopped working as well.
Please help?

Hello
Who knows what have you installed and what is missing so Ill send you full installation list and pleae install all drivers, tools and utilities following this installation order.
1 Windows XP Pro(SP3) Service Pack3 RTM
2 Sun Java 2 Runtime Environment V1.6.0_06
3 Intel Chipset Software Installation Utility Chipset 8.7.0.1007 (02)
4 Intel(R) Cantiga-GM / UMA Version: 6.14.10.4953
or
4 ATI M82XT, M86 Driver
5 Azalia, Realtek ALC268 Audio Driver Version:5.10.0.5599
6 Realtek 10/100 LAN Driver Version:5.686.103.2008
7 Synaptics Touch Pad Driver Version: 10.1.8.0
8 RICOH R5C833/R5C837 Card Reader Memory Stick 6.0.1.11
SD/MMC 6.0.3.5
XD Picture 6.0.1.13
9 Intel iMSM Driver(Robson) Version: 8.0.0.1039
10 TOSHIBA Software Modem V2.1.77(SM2177ALD04)
11 Motorola ML3054/SM56 Modem Version:6.12.14.3
12 Modem Region Select Utility (for Motorola) V2.2.3.0(RST223MOT03)
13 Intel Wireless LAN Driver V12.0.0.73.0.x32_wCAT
14 Intel Proset Utility V12.0.0.0.6.x32
15 Atheros Wireless LAN Driver V7.6.0.200.0.x32_wCAT
16 Realtek Wireless LAN Driver Version: 5.1116.1226.2007
17 Atheros Client Utility V7.0.1.98.0.x32_wCAT
18 Chicony Camera Software Version: UVC 1.7.193.0508L / 6.2.238.214
19 Presto! BizCard 5 V5.50.02
20 Bluetooth Stack for Windows by Toshiba V6.10.07.2T
21 CIR Port Driver Version:7.1.64.1011
22 TOSHIBA Common Module V1.00.08
23 TOSHIBA Power Saver V7.04.02.I
24 TPSInit V1.0.4.1
25 TOSHIBA Zooming Utility V2.0.0.24c
26 TOSHIBA Controls V3.32.4102
27 TOSHIBA PC Diagnostic Tool V3.2.9
28 TOSHIBA Hotkey Utility V1.00.01
29 TOSHIBA TouchPad On Off Utility V1.00.01
30 TOSHIBA Utilities V1.00.06
31 TOSHIBA Assist V1.03.00upd4
32 TOSHIBA Speech System V1.00.2515
33 TOSHIBA ConfigFree V5.90.09
34 ConfigFree Demo Screen Saver V1.00.07
35 TOSHIBA SD Memory Utilities V1.8.1.3
36 Authentec AES1610 Fingerprint Utility Version: 7.10.1.0/AP 2.1.10.0
37 CD/DVD Drive Acoustic Silencer V1.00.008
38 Proton Pack V3.10.15
If something is missing on Toshiba download page just install next available software.

Satellite Pro A210 DVD Drive not working - error code 39

Hi All
My Satellite Pro A210 dvd drive is not loading.
When I looked into it it showed an error code 39.
I tried uninstalling it and reinstalling it but it's still not working.
Any ideas?

Hi
From my knowledge the error message 39 appears if the CD/DVD drive is not visible in the My Computer.
You can try this workaround:
Go to device manager and delete the CD/DVD drive from the device list.
Then go to registry (regedit) and remove the upper and lower filters from the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the unit and test it again
I think this should help!

Satellite Pro 6100: Fn keys not working

Hello,
Ive got a Satellite Pro 6100 notebook. Im having trouble using the secondary function keys (im not sure what they're called!). When I press the function (Fn) button, the light below the F10 button come on as it should, but when i press any of the F buttons i.e brightness up/down, nothing works!
I had a quick look at some of the keyboard help and troubleshooter in control panel which suggested the driver may be incorrect so i tried looking for an updated driver, but windows said i have the latest driver.
Does anybody else have this problem with the SP6100? Can it be fixed? If so how?!
Any help would be great.
Thanks - Kavi.
Message was edited by: kavi

Hi
Even the Windows said you use the latest drivers, you should reinstall the drivers.
Firstly remove the Hotkey Utility Emulator for Display Devices from Add & remove programs.
The reinstall the common modules and Hotkey Utility Emulator for Display Devices.
Hope it helps pleas let us known if it will work or not

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

Satellite Pro A300 - FN Key not working with xp downgrade

I have just purchased a Toshiba Satellite Pro A300 and downgraded the o/s to XP.
There is a problem with the FN key on the keyboard, it does not function. I dont know if this has something to do with the xp downgrade?
Any ideas please?

If you have downgraded to Windows XP with the Microsoft disk you must install the Toshiba utilities and Hotkey Utility.
This is necessary for the FN keys in Windows XP so check the Toshiba website for these utilities:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Macbook pro ipod nano does not work after plugging in

I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
Does anyone have any suggestions? Please help. Thanks!

I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

SOLMAN_SETUP not working after login

Hi,
We have installed solution manager,
and trying to configure it using Tcode SOLMAN_SETUP,
this Tcode is not working, it opens browser fine, but with some warnings:
Then after I input the password and user name of user "ddic" and press the login button the page then goes to "The Website cannot be displayed HTTP500" as follow screenshot:
and if i do refresh it gives me the following error:
pls advise.
Thanks
Adiac

Hi Galan,
Check the below parameters and also make sure that services are activated in SICF.
icm/host_name_full
SAPGLOBALHOST
SAPLOCALHOSTFULL
SICF Services are :
/sap/bc/webdynpro/sap/ags_work_incident_man
/sap/bc/webdynpro/sap/ags_workcenter
/sap/bc/ags_workcenter/ags_work_appln
/sap/bc/ags_workcenter/ags_work_webgui
/sap/bc/webdynpro/sap/ags_work_trans_print
/sap/bc/webdynpro/sap/ags_work_incident_create_app
/sap/bc/webdynpro/sap/ags_work_change_man
/sap/bc/webdynpro/sap/ags_work_setup
/sap/bc/webdynpro/sap/ags_work_job_sch_man
/sap/bc/webdynpro/sap/ags_work_implementation
/sap/bc/webdynpro/sap/ags_work_bp_iterf_mon
/sap/bc/webdynpro/sap/ags_work_services
/sap/bc/webdynpro/sap/ags_rbe
/sap/bc/solman/nwbc/solmanwork
/sap/bc/webdynpro/sap/ags_work_gui_selection
/sap/bc/dal/demoA
/sap/bc/webdynpro/sap/wdc_wba_rfc_monitoring
/sap/bc/bsp/sap/wba_start_smdia
/sap/bc/webdynpro/sap/ags_work_gui_default_set
Thanks & Regards,
Sandeep

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Satellite Pro M10 Fn-F5 not working after login???

Similar Messages

Maybe you are looking for