Satellite Pro M30: I need WLan card which supports WPA and 54mbits

I will buy a new wlan adapter..... for my toshiba satelite pro m 30.
myone only supports wep and 11 mbits and i need a faster one that supports wpa and 54 mbits.
whisch wlan adapter is the right one?
i read in forums, that ist a little bit complicated because of the bios, chipset and the connectors.....
could anybody tell me which card is ok?
thanks

Hello Michi
It is not easy to give you any precise info but if your notebook has Intel Centrino mobile technology you can use Intel PRO/Wireless 2200BG LAN Mini PCI adaptor. I have the same WLAN card and can use WPA and 54mbits data transfer speed.
If you want to be sure try to contact service partner in your country. They should know this for sure.

Similar Messages

Satellite Pro L50-B05D - need WLan driver for Windows 7

Hi
I bought a *Toshiba Satellite Pro Model L50-B05D psktaa-05d001*.
I needed a new machine as I was starting a new job the next day.
During an install off office 2013 the machine in one of its reboots had a catastrophic error.. and refused all recovery attempts. around 19:00 at night...
I needed an operational machine for work...the next day
I pulled out my Windows 7 and proceeded to reconfigure machine and install Windows 7.. The Machine is operational BUT I cannot get the Wireless LAN functioning... for the Model I have there does NOT appear to be a Wireless lan driver...
The network card functions BUT not wireless LAN..
Can anyone please advise what is the correct Wireless LAN driver for the machine...
Thanks
Harpoon2222

Hi
Your notebook Satellite L50-B05D belongs to the PSKTAA series and this series was released in Australia only.
But the similar notebook series Satellite L50-B PSKTAE was released in Europe.
Therefore the drivers from Toshiba EU driver page should be compatible.
Visit this page:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Here choose.
Notebook
Satellite
Satellite L
Satellite L50-B
PSKTAE
Win 7 64bit
Note: there are three different Wlan drivers: Intel, Atheros, Broadcom

Satellite Pro L20 (PSL25E) - Need WLAN driver

Hello, new at this!
Satellite Pro
L Series
L20
PSL25E
Windows XP
Ive never had a Lan Driver or the ability to connect to a WiFi Network. I currently use a BT voyager, however that has broken. Is there anywhere I can download either Lan Driver or Wireless Lan Driver that will allow connection to my WiFi Network without the use of the external BT voyager.
Im sorry if this doesnt make sense. Ive tried various links to no avail.
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
http://aps2.toshiba-tro.de/wlan/?page=downloads
Thanks for your time. Regards.

Yep, this looks like the correct driver! A message has just appeared though:
The software you are installing for this hardware:
Intel Pro/Wireless 2200BG Network Connection
Has not passed Windows Logo testing to verify its compatibility with Windows XP.
Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
Is this a normal message?
How reliable are the Toshiba downloads?
Im using this link:
http://aps2.toshiba-tro.de/wlan/?page=downloads

Satellite Pro M30 graphics card not working when driver is installed

Hi all,
Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
Anyone can help me?
[email protected]

It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

Need info about max HDD size available for Satellite Pro M30-813

Hello,
The following question is mainly to be addressed to authorized Toshiba support personnel. What exactly is the limitation of a maximum size of an internal HDD that I could use with my Satellite Pro M30-813?
Recently, I have bought and installed seagate 160 GB SATA drive, onto which I have successfully installed WXP Pro and have been running it for quite a while with no problems. Recently, I have been copying large amount of data from an external hard drive to my new internal disk, and as the files were being copied as I noticed having about 50 GB free space left, I had experienced windows "delayed write failed" and a massive partition failure with no possibility to recover data. The system would no longer boot and the whole MBR was damaged. As the result, I have lost all data on my new disk.
Although, I realize that Toshiba is not responsible for additional hardware that I use with my laptop and that is not officially supported by Toshiba, I am certain that as an end user of a Toshiba product I have the right to know about a max HDD size limitation information for my notebook model. Therefore, I request Toshiba technical support representative to give me a straight official answer to my question.
Thank you in advance,
Andrejs
(You may also contact me privately at my e-mail address)

Hi Andrew
> The following question is mainly to be addressed to authorized Toshiba support personnel
I think you are in the wrong area if you are looking for an answer from an authorized Toshiba support.
This is a Toshiba user-to-user forum! You will meet here Toshiba notebook owner and enthusiasts who share knowledge and tries solve problems but nobody from Tosh :(
I could provide my experience with the M30 Satellite and the HDD upgrade possibilities.
In my knowledge the Sat M30 supports a 40GB, 60GB and 80GB HDD for sure.
In my opinion you could use the 100GB HDD but bigger HDDs will not run and functions correctly.
So switch to a lower HDD size and enjoy the notebook!
Ive goggled a little bit and found compatible HDD and the part numbers
HITACHI GBC000Z810 -> 80GB
HITACHI GBC00014810 -> 80GB
TOSHIBA HDD2188B -> 80GB
HITACHI G8C0000Z610 -> 60GB
HITACHI G8BC00013610 -> 60GB
TOSHIBA HDD2183 -> 60GB
TOSHIBA HDD2184 -> 60GB
I hope this could help you a little bit!
Best regards

Satellite Pro M30 - cannot install sound driver

Hi
I have a Satellite Pro M30 which usaed to work fine but I can no longer install sound card drivers on it.
I THINK it has happened since we reinstalled windows XP Pro with SP2 but can not be certain.
It is trying to install the Sigmatel AVC97 drivers and comes up with the following error.
Invalid operating system parameter or this installer does not support this operating system
Any suggestions as there seems to be only one sound driver for the SPM30 family.

Nobody here have got a problems with sound driver installation just you
So is this not strange for you???
Either you did something wrong or its your windows XP issue.
Please note that the Toshiba driver page provides also the Installation Instructions
There you can find the right installation order!
Install your OS again and follow this instruction in this doc!

Satellite Pro M30, Is it recommended to install the new display driver from nVIDIA?

I own a Satellite Pro M30 notebook, which includes a GeForce FX Go5200 GPU made by nVIDIA. On July 27, nVIDIA released a new driver and related software (version 61.77) which, as stated by nVIDIA, fits all its GPUs.
I tried to install this new driver on my notebook (after removing the old driver as instructed by nVIDIA) but it does not install. Does somebody have any idea why?
Why isn't the new driver posted on Toshiba's driver support site for this notebook?

Hi
All drivers are designed and tested for the notebooks and Tom is right about depending on notebook producer. That means that you can find all necessary drivers on Toshiba download page.
As far as I know Toshiba supports the drivers delivered with the unit and updates drivers if needed.

Satellite Pro M30 , Can you help me to how i can connect Serial COM wire?

Dear Sirs,
Can you help me to how I can solve my following issue:
I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial COM Port in this model.
Can you help me to how I can connect Serial Com wire (SR232 DATA)?
Where I need to connect above wire for Satellite Reserve updating.
Also for your information the wire which I have is tow male sides.
Regards
Ali H. Ba-Aqeel
[email protected]

Hello,
youve got the alternative to get an PCMCIA Serial Port Adapter.
The Installation was easy at my Notebook and runs without Problems in Windows XP and 2000.
Have a try.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Satellite Pro A100 PSAA3E: What WLan driver should I use?

What wireless software should i download to make my built in wireless work.
I have downloaded almost all of them but they install and i see no wireless there :S
Help please?

Hi
The Satellite Pro A100 were equipped with the different WLan cards; two different Wlan cards are possible; Intel and Atheros.
All necessary WLan drivers can be found either on the Toshiba European driver page or on the Toshiba WLan portal.
http://aps.toshiba-tro.de/wlan/
Check both drivers. One of them will work for sure!
Regards

What is the mainboard productnumber on Satellite Pro M30?

Hello,
I need the Productnumber from the mainboard for my Satellite. Modell Nr. : PSM35E-000NU-GR
Thanks.

Rocko your right number is notebook part number and number posted by Doc is part number for mainboard.
All Satellite Pro M30 belongs to model number that begins with PSM35E and you can find it on Toshiba sticker at the bottom side.
Start Google and put P000400260 as search term and check the results.

Keyboard not responding - Satellite Pro M30

Hi,
I have recently purchased a Satellite Pro M30. The keyboard has stopped responding completely. When I turn the laptop on and when it prompt me for login credentials I am just not able to enter it, nothing happens when the keys are pressed.
I re-installed the unit using recovery CD but no luck. Interestingly, when I put laptop in stand-by mode, and when it comes back to normal mode, keys work for few seconds. Also if I kill the explorer.exe and launch new one, keys works for some time.
Since keys are working when laptop comes out of standby mode, the keyboard is not completely dead/hardware failure. My OS is XP Pro SP2.
Please help.
Thanks in advance,
Sanjay Kedare

Hello
The best way to check the functionality of the unit is to preinstall the unit with original recovery CD or DVD. Like I can see you have already done this.
If the problem still persists I assume there is some hardware problem. I dont know if the unit is new one or used one but you should contact service partner in your country and explain them the situation. Valid warranty will cover all costs if some hardware part is defective and must be exchanged.
Bye

UK key tops for Satellite Pro M30

I have bought a Satellite Pro M30 in France and it has a French keyboard. I have set it up to work as a UK version but can anyone tell me how to get UK key tops so I can change them for the French ones. Failing that, does anyone have the part number for a new keyboard for this model?

Wow! This system realy works. Thank you so much for getting back to me so soon.
I will keep this question open for the time being just in case someone comes up with a place to get just the keycaps - hopefully that will be cheaper than buying a complete keyboard.
Stuart

Are there any PC cards which have sample and hold capability

Are there any PC A/D cards which have sample and hold capabilities up to a 10 Khz sampling rate which we are interested in for modal testing of engine structures. Also if this type of card is available what would be the maximum input channel count of this card. We would be interested in the highest count available up to 64 channels.
A second question: We currently have a 64 channel PCI 6071 capable of 1.25 MS/s throughput. If we are using all 64 channels what would be the interchannel delay between the first and last recorded channel and at what frequency would we have to be sampling to even be able to see the affect of the interchannel delay of this specific card.
This issue has been debated wi
th in our group and your insight would be appreciated as you are the experts in this field.

Dear Sir,
Thank you for using NI Developer Zone.
National Instruments has a product line designed specifically for acquisition of dynamic signals, it is called DSA - Dynamic Signal Analyzers. In according to the description of your application the card that best fits your needs is the NI-4472 that is available in PCI and PXI format. This card is able to acquire 8 channels simultaneously, as opposed to the regular DAQ cards that have a single A/D converter and a multiplexer. The NI-4472 has 8 Delta-Sigma A/D converters one per channel, what results in a better performance than having a single A/D converter in combination with a sample and hold and a multiplexer. To Acquire 64 channels you would have to have 8 boards and synchronize all 64 channels. The Synchronization process is very simple and with a couple of software calls we can synchronize as many as 112 channels for simultaneous acquisition at 102.4K samples per second per channel.
Regarding your second question, the PCI-6071 will sample between channels in a single scan at the maximum sample rate of the board (1.25 MS/s) but the
scan rate, i.e. the rate in which the same channel is sampled is defined by the user. Being that said, we can conclude that the interchannel delay will be the inverse of the 1.25 MS/s clock, or 0.8 micro seconds.
For a 1 KHz sine waveform, this represent a phase delay of 0.288 degrees between consecutive channels. For a channel list of 64 channels each one having the same 1 kHz sine waveform, the phase delay between the first and the last waveform will be 18.432 degrees.
I really recommend the NI-4472 as a very good solution for your application, besides that the combination of the NI-4472 with LabVIEW and the sound and vibration toolset will give you a tremendous tool to solve not only your immediate need but also provide you a system that will be easily modified and adapted for future needs.
If you need more info, feel free to contact me and I can give you more details about this product.
Call 1 800 IEEE488 and ask to speak with the Computer Based Instruments (CBI) support team.
Best Regards.
Omar De Andrade
Applications Engineer - Computer Based Instruments
http://www.ni.com/support/

Running Firefox 10.0.2, cannot add new search engines from Mycroft Project. Error message: "you will need a browser which supports opensearch to install this plugin" Please help with steps on how to fix this issue in Firefox, thank you

Can't add new search engines from Mycroft Project in FF 10.0.2. Error message states: "you will need a browser which supports opensearch to install this plugin"

You're welcome.
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Satellite Pro M30: I need WLan card which supports WPA and 54mbits

Similar Messages

Maybe you are looking for