Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Similar Messages

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Satellite Pro A200: Card Reader does not work after XP installation

Hi...
I have removed Windows Vista from my Satellite Pro A200 in favour of XP Home.
I'm much happier with the machine now but am unable to get any response from the Card Reader. There's no mention of it in the User's Manual that came with the machine.
I can't find any reference to it in the Control Panel's Hardware Manager and nothing changes in there when I insert an SD memory card.
I didn't have cause to try the reader prior to removing Vista, so I don't know if it ever worked... although I imagine that it did.
Running a search for a driver in the download section didn't have any success and this forum has no direct answers.
Does anyone have any idea what I need to do to get this to work?
Popa Mintin.

Hi
I dont see any serious reasons why your card reader shouldnt run/function with installed Windows XP.
What you need is the right driver.
The Toshiba driver page provides all Win XP drivers and there is also an XP driver for the multi card reader.
You need a Texas Instruments Flash Media Driver. This is a driver for your Bridge Media Slot.
This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
Cheers

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

Macbook Pro Pinch/Zoom feature does not work with Firefox 6

Can someone please tell me how to fix this major problem?
I can not get the Pinch/Zoom feature on the track pad to work on my Macbook Pro. I am running OS 10.6.8.
I have seen this below in other posts, and have tried it, but it STILL does not work !!!!
'''''Some gestures have been removed in Firefox 4.
'''You can restore the zoom feature by changing the values of the related prefs on the about:config page.
'''browser.gesture.pinch.in -> cmd_fullZoomReduce<br>
'''browser.gesture.pinch.in.shift -> cmd_fullZoomReset<br>'''
'''browser.gesture.pinch.out -> cmd_fullZoomEnlarge<br>'''
'''browser.gesture.pinch.out.shift -> cmd_fullZoomReset<br>''''''
'''To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.'''
'''If you see a warning then you can confirm that you want to access that page.'''''''''''
Please someone help me - this is a great feature and its really pissing me off that I can't use it.
HELP !!!

I'VE TRIED THIS:
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
I'VE TRIED ALL OF THE ABOVE NUMEROUS TIMES AND IT DOES NOT WORK ON MACBOOK PRO AND FIREFOX 6.
CAN ANYBODY HELP? THANKS ♥

Satellite A660-11M - Power Saver does not work

I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!

Hi buddy,
Wait a moment, please.
Im a little bit confused about your posting First you write about Power Saver and then about green icon Which one you mean exactly and whats the problem?
If you mean Eco mode you have to install Eco Utility from official Toshiba website.

Satellite C50-A0121: My ribbon does not work in libraries

Hi there
Please can you try assist me.....
In Libraries my ribbon does not work, the layout wont allow me to make changes, the right click does not work when i want to select any of the options
I know this might sound blonde for a gal to be asking but PLEASE help
thanks
Yve

Thank you for the reply
It is a Toshiba Satellite C50 - A0121 (C1005 4096)
Ive attached two pictures
1) the properties do not come up when i right click on any file
2) the format on the ribbon does not work, where you change the way you look at a folder
Originally Posted by Juan28
Sorry but your message and issue is not understandable enough.
Could you please post the notebook model and the system you are using?
Please explain exactly (very detailed) whats wrong with your notebook!

Satellite C660-11W - Num pad does not work

Hi!
I have a Toshiba Satellite C660-11W, who I bought 10 months ago. Since October, the num pad of my laptop does not work, but when I push the button "Num Lock", it makes a sound like I had activated the sticky keys.
How do I solve this problem?

Hi
Sounds a little bit like keyboard malfunction.
I think the service technician should need to initialize the Numpad function by Test & Diagnostic software and should replace the keyboard if the test would fail.

Satellite A660 BIOS update link does not work

Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
Unfortunately the link does not work.
I hope someone reads this part of the administration of technical assistance.

Hi
For PSAW3E:
http://support.toshiba-tro.de/tedd-files2/0/bios-20100920154827.zip
Run it as admin.

MacBook Pro up arrow key does not work how to fix it?

When I am just working on the computer the up arrow key does not work at all but when I use bootcamp to go to the PC side the arrow works so i know its not a phisical problem, i have tryed everything i know and still no success.

Hello brooklinekilla,
I would be concerned too the up arrow key on my keyboard was not working. I found an article that can assist with further isolating and troubleshooting issues with the built in keyboard. I recommend following the steps under the section titled, "Some keys don't work as expected" in the following article:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Similar Messages

Maybe you are looking for