Satellite Pro M30 - wireless cant connect to Internet

Hi
I'm having problem when trying to connect to internet by using wireless PC card. I did all card instructions, it's indicates green light in power field but no lights in link field?
Why?! Pleas help.
Thanks

Hello
First of all the wireless card must be installed properly. I dont know which card you have exactly but check please in device manager if the card is listed and ready to be used (check device status).

Similar Messages

Satellite Pro P100 - Can't connect to Internet via LAN

I have a Toshiba Satellite Pro P100. Model No SPSA4A-005002
I used my recovery disk and wiped my computer, because of a virus and now I cant connect to the internet via cable but my wireless internet works perfectly.
Its completely dead there are no lights at the back of the laptop from where I plug the cable in.

Hi
Is your LAN card recognized properly in device manager?
In your case I would try updating the LAN driver. You can get the latest version here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you check the BIOS version. The latest version should be installed and load the default settings there.
In worst case its a hardware problem and you have to exchange the whole mainboard :(

Satellite Pro A10 - Unable to connect to internet

I have an old Satellite SPA10 which lost internet connectivity about a year ago.
The components at fault are:
Ethernet Controller
Network Controller
Video Controller
Video Controller (VGA)
I have tried numerous attempts to install drivers to replace those already on but each attempt has failed. The Toshiba downloads I used were from the following link:
http://www.toshiba.co.uk/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi nes&action=sea...
I'm using a desktop which is ok although it does have its own faults and would like to get back to using the Satellite.
Any suggestions please?
(Using Windows XP)

Hi
This old notebook model is supported for WXP but WXP is not supported by Microsoft anymore.
Anyway if you want to have well working machine I recommend you to make clean WXP installation.
After doing this you should install all necessary drivers, tools and utilities additionally.
This notebook model was offered with WXP SP1 at this time.
Do you have WXP installation disc? Is clean WXP installation an option for you?
If yes I can help you with this and send you exact installation order for drivers, tools and utilities.
One more thing: do you have original recovery installation disc?

Satellite Pro M30: Wireless LAN/ZeroCfgSvc MFC Application

Whenever i turn on the wireless lan switch an error msg appears " ZeroCfgSvc MFC Application has encountered a problem and needs to close.
What shall I do?

Hi
I have read on some websites that a new wireless driver update could solve this issue.
Try to download the new wireless update from the Toshiba website:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
or from the Intel website:
http://downloadfinder.intel.com/scripts-df-external/Support_Intel.aspx
Check also this site:
http://forums.divx.com/groupee/forums/a/tpc/f/221101651/m/693108652
http://www.neuber.com/taskmanager/process/zcfgsvc.exe.html
Regards

Satellite Pro M30 , Can you help me to how i can connect Serial COM wire?

Dear Sirs,
Can you help me to how I can solve my following issue:
I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial COM Port in this model.
Can you help me to how I can connect Serial Com wire (SR232 DATA)?
Where I need to connect above wire for Satellite Reserve updating.
Also for your information the wire which I have is tow male sides.
Regards
Ali H. Ba-Aqeel
[email protected]

Hello,
youve got the alternative to get an PCMCIA Serial Port Adapter.
The Installation was easy at my Notebook and runs without Problems in Windows XP and 2000.
Have a try.

Satellite Pro M30 Win 7 - webcam does not work on msn messenger

Hi all
I have a Satellite Pro M30 Modell Nr.: PSM35E and have just changed to Windows 7. But the Nvidia Card NVIDIA GeForceTM FX Go5200 Grafik mit 64 MB RAM does not work properly.
I could find a driver from Vista and installed it, have Aero pics on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.
Can someone help me?
Thanks for your help

Hi
Im a little bit confused; do you have some problems with the graphic card or with the webcam?
I assume you are speaking about external webcam connected to the USB port? Right?
What happens if you connect the webcam to the notebook? Can Win 7 recognize the connected device? Did you install additional drivers for this webcam?
In most cases its necessary to do that because I think its not plug & play device.

Time capsule cant connect to internet

My Time capsule has recently stopped working (yellow flashing light) when it cant assign an ip address. I checked Airport utilities and now it has no ip address and cant find dns server. The problem with losing ip address has happened before and was resolved by restarting the modem. I've tried another router and its fine so my modem is ok. This time my time capsule dont want to work with the modem. Its stuck and cant connect to internet. I've restarted the TC but it didnt help so now Im pretty clueless. Any advice woyld be appreciated.

Ok, when the simple stuff doesn't work you need a lot more analysis.
1. Plug a computer direct to the modem.. does the modem give you internet? (are we talking cable?? what internet?)
Once you clear the modem is working.. then the issue is purely the TC.
2. You didn't make clear if you followed the instructions I gave.. I want you to plug in the TC to a computer by ethernet. Lan port to the computer ethernet. Turn off wireless on the computer.. disconnect all other network connections on the TC. Press and hold reset until the front LED flashes rapidly.
Can you now access the TC?
If not it is likely dead ..
If you can make sure it is in router mode.. plug the modem into the TC wan port.. for cable you will have to power cycle the modem.. this can take a while.. 15min depending on your ISP.
Reboot everything.. and check if the TC has picked up a public IP on wan.. if not it has failed on wan side.
If the TC is dead.. or just as a means of testing.. get another router and plug it in. Substitution is the best test method.
Exactly how old and what model is the TC?
If it is Gen 3, A1355 try leaving it off overnight and restart the next day.. test immediately from cold. They have several board issues.
Or if the TC is newer and you have existing warranty or applecare let apple fix it.

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Satellite Pro M30 - cannot install sound driver

Hi
I have a Satellite Pro M30 which usaed to work fine but I can no longer install sound card drivers on it.
I THINK it has happened since we reinstalled windows XP Pro with SP2 but can not be certain.
It is trying to install the Sigmatel AVC97 drivers and comes up with the following error.
Invalid operating system parameter or this installer does not support this operating system
Any suggestions as there seems to be only one sound driver for the SPM30 family.

Nobody here have got a problems with sound driver installation just you
So is this not strange for you???
Either you did something wrong or its your windows XP issue.
Please note that the Toshiba driver page provides also the Installation Instructions
There you can find the right installation order!
Install your OS again and follow this instruction in this doc!

Satellite Pro M30 graphics card not working when driver is installed

Hi all,
Im having problem with my nvidia Geforce FX Go5200, in a Satellite Pro M30 laptop, (Intel Pentium M processor 1.7 GHz, 512 Ram). This card was working fine suddenly the notebook stops.
I have formatted the notebook and installed Win XP PRO. After installing the VGA driver I restarted the notebook but black screen started coming up right after the Win XP splash screen appears. The notebook continues to start up but no screen.
It starts just fine in safe mode. I get my best screen by simply disabling the geforce card or uninstalling the driver. I tried to install a new driver for the VGA from the Toshiba download site but same problem appears. I have also tried updating BIOS but nothing happens.
Anyone can help me?
[email protected]

It is very strange issue. It will be really interesting to know if this happen when you use delivered recovery installations CD.
Anyway I presume there is some problem with LCD display. In safe mode the desktop is shown in lowers resolution but when OS starts the resolution will be adapted for standard one (1280x800) and obviously there is the problem.
I am not technician but I recommend you to contact service partner. As far as I know they use special tools and programs for display tests. They can tell you more.

Need info about max HDD size available for Satellite Pro M30-813

Hello,
The following question is mainly to be addressed to authorized Toshiba support personnel. What exactly is the limitation of a maximum size of an internal HDD that I could use with my Satellite Pro M30-813?
Recently, I have bought and installed seagate 160 GB SATA drive, onto which I have successfully installed WXP Pro and have been running it for quite a while with no problems. Recently, I have been copying large amount of data from an external hard drive to my new internal disk, and as the files were being copied as I noticed having about 50 GB free space left, I had experienced windows "delayed write failed" and a massive partition failure with no possibility to recover data. The system would no longer boot and the whole MBR was damaged. As the result, I have lost all data on my new disk.
Although, I realize that Toshiba is not responsible for additional hardware that I use with my laptop and that is not officially supported by Toshiba, I am certain that as an end user of a Toshiba product I have the right to know about a max HDD size limitation information for my notebook model. Therefore, I request Toshiba technical support representative to give me a straight official answer to my question.
Thank you in advance,
Andrejs
(You may also contact me privately at my e-mail address)

Hi Andrew
> The following question is mainly to be addressed to authorized Toshiba support personnel
I think you are in the wrong area if you are looking for an answer from an authorized Toshiba support.
This is a Toshiba user-to-user forum! You will meet here Toshiba notebook owner and enthusiasts who share knowledge and tries solve problems but nobody from Tosh :(
I could provide my experience with the M30 Satellite and the HDD upgrade possibilities.
In my knowledge the Sat M30 supports a 40GB, 60GB and 80GB HDD for sure.
In my opinion you could use the 100GB HDD but bigger HDDs will not run and functions correctly.
So switch to a lower HDD size and enjoy the notebook!
Ive goggled a little bit and found compatible HDD and the part numbers
HITACHI GBC000Z810 -> 80GB
HITACHI GBC00014810 -> 80GB
TOSHIBA HDD2188B -> 80GB
HITACHI G8C0000Z610 -> 60GB
HITACHI G8BC00013610 -> 60GB
TOSHIBA HDD2183 -> 60GB
TOSHIBA HDD2184 -> 60GB
I hope this could help you a little bit!
Best regards

What is the mainboard productnumber on Satellite Pro M30?

Hello,
I need the Productnumber from the mainboard for my Satellite. Modell Nr. : PSM35E-000NU-GR
Thanks.

Rocko your right number is notebook part number and number posted by Doc is part number for mainboard.
All Satellite Pro M30 belongs to model number that begins with PSM35E and you can find it on Toshiba sticker at the bottom side.
Start Google and put P000400260 as search term and check the results.

My wifi bar isnt showing up at the top and i cant connect to internet but its not my router

my wifi bar isnt showing up at the top and i cant connect to internet but its not my router? HELP HOW DO i get wifi back

I recommend that you start with taking a look at the Apple Support article to help you troubleshoot what the issue may be.
If that still doesn't resolve the issue, we will need to get the AirPort icon back on the OS X menu bar to continue. Please try the following:
System Preferences > Network > Wi-Fi > Show Wi-Fi status in menu bar (checked)

Satellite Pro M30, Is it recommended to install the new display driver from nVIDIA?

I own a Satellite Pro M30 notebook, which includes a GeForce FX Go5200 GPU made by nVIDIA. On July 27, nVIDIA released a new driver and related software (version 61.77) which, as stated by nVIDIA, fits all its GPUs.
I tried to install this new driver on my notebook (after removing the old driver as instructed by nVIDIA) but it does not install. Does somebody have any idea why?
Why isn't the new driver posted on Toshiba's driver support site for this notebook?

Hi
All drivers are designed and tested for the notebooks and Tom is right about depending on notebook producer. That means that you can find all necessary drivers on Toshiba download page.
As far as I know Toshiba supports the drivers delivered with the unit and updates drivers if needed.

Keyboard not responding - Satellite Pro M30

Hi,
I have recently purchased a Satellite Pro M30. The keyboard has stopped responding completely. When I turn the laptop on and when it prompt me for login credentials I am just not able to enter it, nothing happens when the keys are pressed.
I re-installed the unit using recovery CD but no luck. Interestingly, when I put laptop in stand-by mode, and when it comes back to normal mode, keys work for few seconds. Also if I kill the explorer.exe and launch new one, keys works for some time.
Since keys are working when laptop comes out of standby mode, the keyboard is not completely dead/hardware failure. My OS is XP Pro SP2.
Please help.
Thanks in advance,
Sanjay Kedare

Hello
The best way to check the functionality of the unit is to preinstall the unit with original recovery CD or DVD. Like I can see you have already done this.
If the problem still persists I assume there is some hardware problem. I dont know if the unit is new one or used one but you should contact service partner in your country and explain them the situation. Valid warranty will cover all costs if some hardware part is defective and must be exchanged.
Bye

Satellite Pro M30 - wireless cant connect to Internet

Similar Messages

Maybe you are looking for