Satellite Pro M70 - Can't install Toshiba Power Saver Driver

Hi, I can't install toshiba power saver driver on my laptop because instalation crashes with error 1610: The configuration data for this product is corrupt. Contact your support personnel. I tried more versions of power saver driver. I got latest official chipset driver..Know somebody how to fix that?
My second problem is with battery, my laptop running on battery for max 10 minutes (i got my laptop 2 years) and i dint using battery supply often. Can battery loose so much capacity in 2 years even if i used to my battery once a week?
Sorry for english and thx for reply

I believe you must not install this driver, only Power saver utility only.
What to say about battery? In my opinion it is possible. In my opinion the battery life time cannot be defined so easy.
Some batteries run well after 3 years of usage and some of them are death after one year only.

Similar Messages

I cannot Install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

I cannot Install/reinstall/remove/run Toshiba power saver on my Satellite M45-S169. after I have reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via control panel I got accessed denied and every time I reboot the system I get the error message:
Toshiba Power Save
A fatal error has occurred. This programme will be terminated.
Code: Ox7E
I cannot neither remove nor reinstall power saver. Can I try to run power saver for Windows XP SP2 applicable for other laptop models? I could not find the one for my model. Which one will fit? Any other solutions/advises to the problem?
Please, help
Thank you a lot, Oksana

Hi
First of all you have to known that this notebook was designed for the US market and all drivers, tools or any other Toshiba utilities should be used from the Toshiba US website.
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
Please ensure that you have already installed Toshiba ACPI Common Modules before you will continue with any further Toshiba software installation.
One important hint; the Toshiba power saver profile must be chosen in the Windows power options!!! Dont forget this!!!

Satellite Pro L500 - Can't install Realtek LAN driver

Hi All,
I have recovered a Satellite Pro L500 Windows 7 pro with disc created from notebook, but now can't install a Realtek LAN driver for the notebook.
The software driver installer dosn't seem to run correctly all the time, have tried several times to install, with only once a realtek "repair" option becoming available.
When I did manage to install driver I got a error "device failed to start". after recovery I also had problems with a "PCL simple communications controller driver",
which seems to have been a Intel MEI according to the VEN, DEV info displayed in systems info.
Are these problems related and how do I Install the required driver in a automated system if the system won't detect the hardware correctly?

Have downloaded from many sources the correct driver, but the motherboard or the OS is not discovering the network adaptor so even if the driver is installed the divice is not recognised as being there(physically installed). when installing the driver software i get the error from the realtek installer "Realtek network controller was not found. If in deep sleep mode is enabled please plug the cable". have no idea what or how deep slee is enabled and have reset bios settings to default and have reset cmos.

Satellite A660-11M on Windows 7 - Toshiba Power Saver does not work

I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!

Toshiba Power Saver is only for XP installations, you can't install the XP Drivers (and most Vista Drivers) in Windows 7.
Make sure all your drivers are for the A660, and make sure they are for Windows 7.

Receiving error message when trying to install Toshiba Power Saver

Recently toshiba power saver stopped working - I removed it and redownloaded it from this website, now whenever I try to run the install i get a "unable to machine id" message and the install stops.
First time posting here so If i'm on the wrong forum or you need anything else apologies in advance.

Hi there,
where did youve downloaded the powersaver? Maybe you downloaded the wrong one for your machine. Its absolutely important to download EXACTLY that software which fits your machine type.
When downloading stuff from toshiba websites you have to keep an eye on the version of your machine (e.g. Satellite A100-552 -> download the software for type "552" of the Satellite A100 series).
This sometimes resolves many errors and clarify some not very nice situations.
Please, more details on your problem. :)
Greets

Satellite Pro A100 - Can't install sound driver

Hello,
Hope someone can help, I'm having trouble getting a sound driver to work, I've tried quite a few different drivers now and none seem to work.
I've tried all the drivers off the Toshiba driver download site with no luck. I'm still left with a yellow question mark in device manager. (Satellite Pro A 100) During the installation the window appears that i must instull MICROSOFT BUS DRIVER BEFORE this audio drive r(Realtek HDA for XP).
Where can I get this driver(Appreicate if someone could point me in the right direction), or somebody can give me another usefull advice?
Appreciate any help
Thanks.

I think this is a known issue.
Sometimes its useful to search in the Microsoft Knowledge Base. There I had found these interesting documents:
http://support.microsoft.com/kb/835221
http://support.microsoft.com/kb/888111
Its very important to install these hotfixes before you install the driver.

Satellite Pro A200 - Can't install Windows 7 due missing CD/DVD driver

Hello, I have a Satellite Pro A200, PSAE4E-046018N5 and I'm trying to install Windows 7 but I can't pass from step one because it doesn't found a driver:
A message box saying: A required CD/DVD drive devise driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
-What to do?
CD-ROM is a HL-DT-ST DVDRAM GSA-T20N ATA, the actual driver have version 6.0.6002.18005 (date:2006-06-21)
Best regards
/peter

Hi Peter,
Do you try an upgrade from Vista to Windows 7 at the moment? If yes please try a new and clean installation of Windows 7. Does this work?
Another question: Is your CD/DVD drive working properly or is it listed with yellow exclamation mark in device manager?
In your case I would try to remove the drive from device manager and restart the notebook. After this the drive will be recognized automatically.

Satellite Pro S300L - Can I install Windows 7?

Can I install windows 7 on my Satalite pro s300L if so which version 32 or 64 Bit?

Hello
First of all you can install what you want.
Why?
Its your notebook and you can do what you want with it! ;)
In my opinion its depending on the RAM which version you should install If you use 4GB or more RAM, choose the 64bit version. Otherwise 32bit is enough and therefore you can get all drivers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Satellite Pro L510 - Can't install and start Intel Link 5100

Hi,
I have a Satellite Pro L510 (P/N:PSLFML-002004). Recently, I have updated my WLAN to Intel Link 5100 (my original WLAN is Realtek RTL8191SE). I've tried Windows 7 32bit and 64bit with intel driver, version 13.4 and 13.5, non of them has worked so far. I always get this error "This device cannot start" from Device Manager
Can anyone help me with this problem, please?
Duy

Hello
> My old WLAN works normally before the upgrades
So I think this WLAN card is not compatible. Not all WLAN cards are compatible with all notebooks. I think this also depending on the mainboard and BIOS
Installing another WLAN card will not improve the range or speed. For example if you use draft N you have 300 Mbps with every WLAN card and the WLAN range is depending on the WLAN antennas and not WLAN card itself.
In your case I would install the old one and be happy with it ;)

Re: Satellite Pro C50 - Can't install Windows 8

Hi.
I have a Toshiba Satellite Pro c50 with Windows 7 preinstalled.
It comes with 2 DVD's containing Windows 8.
I have tried to upgrade to Windows 8 (following the instructions included in the manual: BIOS changes, etc) but I cant install it.
After booting from the DVD, it doesnt appear the Windows 8 install utility, but the Windows 7 recovery options .
Could you please help me?
Thanks in advance,
Sergio

Exactly the same problem.
Toshiba Portege R-930.
Comes with Win 7 preinstalled and 2 CDs with image of Win 8 (Win 8 sticker on bottom of the laptop).
Followed the directions in the leaflet to upgrade to Win 8 (change in BIOS, etc.) like the user above.
It gets only to a blue screen with two options:
1) Toshiba recovery - a frightening black screen with warning that every data will be lost) and
2) System recovery, getting nowhere but to "switch off computer".
At one point got the message that the disc is locked.
Gave up, returned safely to Win 7.
If someone could explain how to do this properly,
Thanks
Ket

Re: Satellite Pro U200 - Can't install HDD protection Utility?

hi
Knows somwonw why I cannot install:
18/08/08
HDD Protection Utility
Toshiba Windows Vista 32 Bit 2.0.0.7 World Wide
on my Satellite Pro U200 PLUA1E-02802QS4 with Vista Business 32-bit?

All Toshiba stuff available on download page is the same as in recovery image.
All tools are tested and I don't see any reason why you should not be able to install this utility.
Is some error message shown?

2011 15in Macbook Pro. Can I install a second SATA drive?

Is there room in the body for a second drive?

you can if you take your optical drive out.
go here for more info owc.

Satellite Pro L40 - Can't install XP and reinstall Vista too

I have formatted my harddrives to install XP pro.
And when I tried it didnt work so I tried to re install Vista and it goes to a blank screen after getting stuck at the completing installation phase?
Any ideas, any help will be greatly appreciated .

sorry i have a sattilite pro l40
8ogb hardrive ,1.5gb ram
with the xp it says that it cannot find any hardrives and to ensure they are powered up correctly,what i would like to to just have vista back and i am using a microsoft disk to do this although this was given to me so not sure if the disk is anygood or not.it just quite confusing as it completes the install apart from the very last stage?

Satellite Pro M70 can't refresh IP address after router reboot

My Laptop isn't able to repair it's wireless connection if I reset the router. I have to power cycle the laptop to get it to connect again as it always gets stuck on getting network address... Any known issues about this with software patch or anything...?
Thanks
Huw D.

Hello Huw
As far as I know there are no known issues with WLAN connection and I dont know exactly what happen with your WLAN connection. After router reboot try to disable WLAN card for a short time, enable it again and try to establish connection again.
The settings are the same and nothing must be changed.
Bye

Satellite Pro M70: Can not get the TV OUT working

I have connected my laptop to my TV via the TV-OUT socket and a 4 pin S-Video lead. I have turned on the TV as an output in the advanced settings of my graphics card. I have selected TV via the Fn-F5 keys and I get nothing on my television.
Can anyone suggest what I might have left out to make this work?
The S-Video lead is new and the hook up to the TV is via a Joytech AV Control Center 2.
The Joytech unit is operational and the video lead appears OK as the Fn-F5 key press indicates that a TV is available - this disappears as an option if I unplug the video lead from the Joytech unit.
Any help would be greatly appreciated.

Hi Lorraine,
I presume that the TV is actually switched to your Joytech AV device ? I presume it gives some kind of signal so that you check that the TV can actually detect it. I once spent a happy few hours trying to use my TV in this way only to find it was switched to the composite inputs not the S-Video one. ;-)
regards,

Satellite Pro M70 - Can't install Toshiba Power Saver Driver

Similar Messages

Maybe you are looking for