Satellite Pro P100 - Can't connect to Internet via LAN

I have a Toshiba Satellite Pro P100. Model No SPSA4A-005002
I used my recovery disk and wiped my computer, because of a virus and now I cant connect to the internet via cable but my wireless internet works perfectly.
Its completely dead there are no lights at the back of the laptop from where I plug the cable in.

Hi
Is your LAN card recognized properly in device manager?
In your case I would try updating the LAN driver. You can get the latest version here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you check the BIOS version. The latest version should be installed and load the default settings there.
In worst case its a hardware problem and you have to exchange the whole mainboard :(

Similar Messages

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • Nokia N8 Can't connect to internet via WIFI

    HI!
    I have some problems to connect to internet via wi fi! I can connect to my wifi adaptor on my pc(hot spot)  with no issues but it wont be able connect to the internet I checked this issue whit a sony ericrson xperia x8 and theres not any problem but my N8 cant connected to internet.
    Solved!
    Go to Solution.

    alucard3 wrote:
    Resolved by unofficial but efficiently hotfix.
    http://www.n8fanclub.com/2012/12/wlan-connectivity​-software-update-for.html
    Hi am having the same problem but the link above does not work?
    Thanks
    ledders

  • Can I connect a PC via LAN to my WLAN - connected time capsule?

    Hi,
    I haven't found any info on this in the forums yet:
    The problem:
    My WLAN - router is located in my living room and has loads of devices connected (iPhone, iPad, 2 Zeppelin Air, MacBook Air, some other Win - PCs etc...)
    One of the PCs (Win 7) is in another room, connected via WLAN too.
    I now have a time capsule near this PC and would like to connect these two via LAN and then use the WLAN connection of the time capsule for this PC too.
    After connecting the Ethernet cable (which was working fine elsewhere) I see that there is a connection, but no access to the network.
    Any suggestions would be highly appreciated.

    You likely have the Time Capsule configured to "Join a wireless network". Is that correct?
    If yes, the Time Capsule does not perform any routing functions in this type of configuration. In effect, it has become a wireless hard drive.
    Therefore, the Etherent ports are not enabled, so there is no signal available at the ports.

  • Satellite C655D-S5533 can't connect to internet through ethernet (wireless connection ok)

    I can't get an ethernet connection thru my ISP's (Comcast) internet cable box.  I clicked the LAN icon on control panel but still can't connect.

    First, reboot the Comcast box and then reboot the computer.  If it still doesn't work, look in Device Manager under Network Adapters. If the LAN adapter shown there is Atheros, reinstall using THIS driver.  If it says something else, post back.  I'm assuming you are still using Windows 7 64 bit that came with the machine.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • My brand new Macbook PRO i5 can't connect to internet after sleep? It works fine after reboot.

    I have a brand new Macbook PRO with the latest OS and the latest EFI. I haven't installed any 3'rd party products except Moneywell for my private finances. After a couple of days it couldn't connect to internet after sleep. I run the network diag and it says the connection is OK. Log out/in doesn't help. I have to reboot everytime it wakes up after sleep. Any clue?
    br,
    DAVID

    I am having the exact same problem.  It started with 10.7, was fixed with 10.7.1, then came back again with 10.7.2.

  • Satellite Pro M30 - wireless cant connect to Internet

    Hi
    I'm having problem when trying to connect to internet by using wireless PC card. I did all card instructions, it's indicates green light in power field but no lights in link field?
    Why?! Pleas help.
    Thanks

    Hello
    First of all the wireless card must be installed properly. I dont know which card you have exactly but check please in device manager if the card is listed and ready to be used (check device status).

  • Satellite Pro P100 - Can't access LAN

    It's the first time I want to use LAN jack. When connecting the LAN cable and activating the network connexion there is no answer at all (light indicators don't work). Testing the card gives a good result. I reinstalled the driver whithout success.
    Could it be a problem of configuration?
    I use WINDOWS XP. Thank you.

    Hi
    Do you get a message from Windows about limited connectivity?
    Is the LAN card recognized properly in device manager?
    Maybe you have to check the configuration. Are you using DHCP or static IP addresses? You should try it with static IP addresses.
    Furthermore go to command line (cmd) and type ipconfig /renew. What happens exactly?

  • Can't connect to internet via dial up modem

    I recently purchased a Mac Book Pro computer and while I can readily connect to the internet via my workplace Ethernet based LAN, I am having problems connecting to my ISP via the USB dial-up modem that I purchased with the system. The problem it seems is that my ISP (Bluelight internet @ www.mybluelight .com) doesn’t support the OS-X operating system and when I try to connect from the Windows XP side, the system doesn’t recognize the modem because there is no Windows driver for it. So it appears that I have 3 options available: 1) obtain a Windows compatible driver for the MAC modem (easiest): 2) buy a new modem that is both windows and OS-X compatible; or 3) change my ISP to one that supports OS-X. As I see things, the easiest way around this problem would be to get a windows compatible driver for the modem so that I can access the web from the XP side. Is there a Windows XP compatible driver available for the MAC USB port modem? If not does anybody have any other suggestions? Thank You

    Try using a different USB port. Several people are having problems with the single port on the right.
    I would not expect a compatability issue with your ISP. After all you only need a telephone number and usrid/password and the prtocols are standard.

  • Can't connect to Internet via ethernet

    I have two brand new 11" MacBook Airs.  I can connect to the internet via ethernet on one and not the other.  I little back story...
    I previously had two 13" MacBook Pros and had the same issue – one could connect to the internet via ethernet and one couldn't.  I used migration assistant when I upgraded to the new MBAs, so I believe I carried over a setting from the previous "problem" comuter to the new one.  Interestingly, both of my MacBook Pros connected to the internet via ethernet just fine until, for reasons unknown to me, one day one would no longer work.
    When I look at diagnostics, the lights are (from top to bottom): green, yellow, green, red, red
    Is it possible to revert some ethernet networking setting to factory?
    Thanks for any help you may be able to provide.
    Caanan

    The same thing has happened to me, it just stopped working. No, I've had this problem for a long time with this machine, but the other day I was downloading some large files, and all the files dropped down to nothing, internet was gone.
    It will connect to Wireless, but now I'm even having problems with that.
    If I plug in the Ethernet cable but set it to use AirPort, it won't find the web. I have to unplug the cable and it will use AirPort -- not good when I need to access hard drives! It had been working with it plugged in, but it just stopped. (I don't know if it was using the Ethernet or the AirPort at the time.) I wasn't messing with any settings at the time.
    Tried restarting, running diagnostics, using different browsers, various websites, didn't help.
    It's a MacBook 2,1 -- 2.0 GHz, Intel Core 2 Duo -- 10.4.11
    I have a G4, same OS, using the same router, same settings, everything. G4 works perfectly.

  • Can't Connect to Internet via Ethernet Cable.

    Hi
    I've looked around but haven't found anyone with exactly this problem. I can't get my MacBook Pro to connect to the internet via ethernet at my dorm. I am on the same connection with the same cable on a different computer right now, so I know that is not the problem. When I plug the cable in to my MacBook Pro it tells me that the cable IS connected, but when I try to go on a site on either Safari or Firefox, it takes a couple minutes trying and then tells me that I don't have a connection. I guess the problem lies somewhere between the connection and the browser. I am using DHCP (I don't know what that means but that's the default and other posts have said to make sure that that's what one is using) and the "connect using PPPoE" box is not checked. My ip starts out 192 etc. so I assume it isn't self-assigned. I WOULD LOVE ANY HELP YOU CAN OFFER.
    I just got back to school today and this is already making this semester pretty awful.

    I am having the same issue. Everything was working hunky-dory but then just up and stopped. The Airport works ok, but considering I am leeching off someone else's across the hall, that is not the most reliable solution.
    In my Network Diagnostics, the Ethernet connection is given a green light, but the it seems unable to find the internet at all.
    I have reset the router several times, restarted my computer several times, and various combinations of the two, as well as changing ports and cables etc...
    any suggestions?

  • Can't connect to internet via router and airtunes at the same time

    Can anyone help me connect to the internet via my BT Homehub, and play AirTunes through my Airport base station at the same time? I can only seem to do one at a time.
    I've seen the articles about setting up clients etc but don't get it. Using the Airport Assistant utilty doesn't really help either. Would like someone to go through the steps I need to follow.
    Thanks

    To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    - Wireless Network: <select your BT Homehub wireless network>
    Music tab
    - Enable AirTunes on this base station (checked)
    - Enable AirTunes over the Ethernet port (optional)
    - iTunes Speaker Name: <whatever you wish>
    - iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    - Look for remote speakers connected with AirTunes (checked)

  • Can't connect to internet via AirPort, but am getting full signal strength.

    I can connect to the network, but can't connect to any website on the internet. My laptop PC is able to connect to internet & network wirelessly..... but it's just my MacBook that can't.
    Thanks & happy thanksgiving.

    what ip address to you have in your laptop?
    is it set to DHCP or did you manually enter in a ip address in your network preferences?

  • Can't connect to internet via linksys

    I have a mac mini intel core duo and i cant connect to the internet. It was working perfactly until a few days ago and it just stopped working It works fine on the PC i have downstairs, but not the mac. I can connect to the network and get a high signal strength, but i can't access the internet. please help
    Mac mini intel core duo   Mac OS X (10.4.7)  

    Take a look here:
    http://forums.macrumors.com/showthread.php?t=240042
    Near the bottom, danfluidmind has a couple of links to the linksys pages; there's some issues with the latest firmware upgrade. I rolled it back and all is well with my mini after having issues since the upgrade to 1.01.0.
    Message was edited by: Michael Schmitt1-typos

Maybe you are looking for