Satellite Pro P100 - Screen stays blank

Computer seems to be on, but the laptop screen stays blank.
Ok so right now the power light is on and HD and the back fan is not on, and when I press the power button, the HD and the back fan comes on and then the power light just flashes, but nothing is on the screen, and the the keyboard lights (capslock/numlock etc) do not flash like they would on a boot up. That leads me to assume that the laptop is hibernating or something, but it should come out of hibernation (if it was) on a press on the power button, but nothing happens when I do that.
also connected an external monitor to the back of the laptop, got nothing on the screen as well.
any ideas?

Hi
Hm, it could be a mainboard issue or something else. I doubt that its a problem of the internal display because tested an external display and there you can notice the same issue.
What you can do is this following workaround: Remove the battery and AC/DC adaptor and then wait one hour. Connect the AC/DC adaptor and battery again. Now you can try to start the notebook again.
If it doesnt work I would ask a notebook technician from an authorized service provider. Maybe its a hardware malfunction and the ASP can test your notebook.
Bye

Similar Messages

Satellite Pro M40: screen stays dark untill Windows has fully loaded

Hello to all on here.
I have a problem with my laptop. My laptop is a Satellite Pro M40.
When I turn on my laptop I have found the back light will not come on... the screen will stay dark untill it has fully loaded into Windows. I have checked all of my power options and there all fine. Even if I can get to the Bios screen its impossible to read the txt due to no backlight. I have tried holding the Fn & F7.. noy joy.
Does anyone have any ideas?
Richard

Hello Richard
I didnt see something like that before and I am little bit confused why you can not see BIOS settings but running OS. Usage of FN+F7 key combination will not help because this option works just under Windows and not under DOS level.
If possible try to connect external monitor and test it again. Anyway I dont believe that you can fix it on your own. Try please to contact Toshiba authorized service partner in your country. Explain the situation and you will see what they will say.
If you find out something please let us know. It will be really interesting to know why this happen.

Satellite Pro S300 - Screen is blank and can't reboot

About a week ago, I left my Satellite Pro S300-EZ2502 on overnight (as usual). It was fine that night.
The next day, I had a black screen and a flashing amber light at the left side. I tried turning it off, rebooting, no dice. I have tried removing the battery and rebooting under just AC power, nothing, I have tried the opposite. Nothing. I have tried letting the battery run out and then recharge. No help. Very occasionally when I plug it back in, I will get a green light for a few seconds, but then back to the flashing amber light. Nothing EVER on the screen.
I have only had this Notebook since MAY!! what is wrong!!

This interests me, as I have three of these S series laptops and two have failed in similar manner so far.
It can be rectified temporarily by removing the battery, then pressing the start button for several seconds to discharge the capacitor (Toshiba told me to do this) and then using the power cable to start up again. It usually works.
Not very elegant to take out its guts though
My problems started in late August early September - is this significant?
Are you using XP or Vista?
Toshiba have not mended the problem despite two journeys for repair for one machine.
What does the blinking light sequence this orange light taps out mean? Nothing in the papers I have looked at.
My machines were bought in March

Satellite Pro P100: Screen lines on Display

Hello Folks wonder if you can help me.....actually wonder if I'm in the right forum.... I think it's a monitor problem not a software issue...
As of late I have vertical lines appearing on my screen... very thin, and in pretty colors....light blue, mint green, and purple.
I get about every 2 weeks or so a new one... Any Idea if thats a software or hardware problem... some computer kid told me that it has to do with the labtop-screen conection? if someone just can tell me to download a driver and it's all gonne be ok. would make me a very happy man......
Also, I've read in this forum that the new bios 4.30 has unresolved fan issues. Should I wait with downloading?
Thanks
Patric

To exclude that your problem is hardware related, try to reinstall display drivers.
I don't know if the new BIOS version for your notebook has some unresolved fan issues, but if you're not sure, wether to install the the update or not, just leave it.
But as I read your post so far, I think the computer kid is right, and there might be someting wrong with the connection to the display. Or it could be another display error or graphic card issue.
If updating the display drivers doesn't bring any improvements, I suggest you should contact local ASP, as this seems to be hardware problem.

When I try to start my MacBook Pro, the screen stays blank - I hear the startup "chime" but nothing else happens.

It's actually my teenage daughter's MacBook, and she's driving me crazy wanting me to fix it... any help would be appreciated.
Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Satellite Pro P100: losing picture on external monitor when I use DVI-D connection

Guys,
I've got a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), so recently I bought a DVI-D cable to connect them together.
Now the problem is that when I've got it connected at 1400x900 the LCD TV screen switches to a black screen repeatedly (usually when there is alot of activity or I'm resizing windows from maximum to mimimum).
Now, I would have thought it would be the LCD TV not liking the signal or refresh rate however I've connected it using a VGA cable and its fine - no problem all no matter how much I mimimise my windows or put alot of activity on screen. To complicate things even more, when I'm running the screens in "Dual Screen" mode rather than "Clone" if I set one of them 1400x900 @ 59hz in 16bit it works fine....??
Can someone please help as this is doing my head in as I can't figure out what the hell is causing it!
I've included a list below of all the different resolutions / screen modes I've tried it in and the outcome.
Thanks for your time & help.
Regards
Craig.
1440x900 Toshiba on Samsung 940MW set to clone (with 32bit colour) using 3m DVI
59hz - will constantly flash screen black
60hz - will constantly flash screen black
75hz - screen flashes black only when resizing windows
1280x1024 Toshiba on Samsung 940MW set to clone (with 32bit colour) using 3m DVI
59hz - works fine
60hz - works fine
75hz - works fine
1440x900 Toshiba on Samsung 940MW set to Dual screen (with 32bit colour) using 3m DVI
59hz - screen flashes black only when resizing windows
60hz - screen flashes black only when resizing windows
75hz - screen flashes black only when resizing windows
1280x1024 Toshiba on Samsung 940MW set to clone (with 32bit colour) using 3m DVI
59hz - no option
60hz - works fine
75hz - works fine
1440x900 Toshiba on Samsung 940MW set to Dual screen (with 16bit colour) using 3m DVI
59hz - works fine
60hz - very rarely flashes black when resizing.
75hz - intermitantly flashes black when resizing.
1440x900 Toshiba on Samsung 940MW set to clone (with 32bit colour) using 2m VGA
59hz - works fine
60hz - works fine
75hz - works fine
1440x900 Toshiba on Samsung 940MW set to Dual Screen (with 32bit colour) using 2m VGA
59hz - works fine
60hz - works fine
75hz - works fine

Hello
I hope you have checked Users manuals delivered with your unit. On the page 148 you can find very interesting table about supported display resolution.
I must be honest with you and say that I am not DVI expert because my LCD has no this port, just HDMI but if I am understood you right you have problem with 1440x900 resolution only. This resolution is not listed as supported and I presume it is not unusual that you have problem.
Sorry but I believe you must use maximum supported 1280x1024 resolution only.

Satellite Pro P100 - Synaptics touchpad issue using Win 7

Satellite Pro P100 with Synaptics touch pad, was running Vista, now Win 7 64 bit.
The original driver had an option "disable when external pointing device connected".
I have installed a driver from Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7-64_Signed_default.exe which does not have this check box.
It works fine except that sometimes the Microsoft Mouse turns off and on every few seconds as it or the touchpad fight each. I have to disable the touchpad.
Then next time I turn on. If I do so without a mouse, I cannot use the touchpad, until i plug in the mouse, reactivate, then unplug the mouse.
Thanks

Sorry, but this problem is reccurring more frequently (like every 2 or 3 days). The driver you recommend does not have the "disable touchpad when external mouse connected", nor does the Fn+F9 button work. Both touchpad and mouse are active at the same time with the result that the mouse becomes active, inactive, active, inactive every few seconds, and is that happens the secondary monitor goes blank (which is normal when new drivers are being installed, such as for an unrecognised flash drive). Thanks.

Satellite Pro P100 PSPAEA - Irritating Fan Noise

Hi,
I have a Satellite Pro P100 PSPAEA and it honestly must be the most irritating laptop I have ever owned.
The problem is the cooling fan that has a tendancy to spin up to maximum regularly, sit there for a couple of seconds then spin down.
Rather than just increasing in speed to cool it kinda roars for a second or two then reduces speed. It can do this like every 15 seconds or so and is driving me nuts especially in a quiet room. I am running Windows Vista and the latest V4.4 BIOS. I am ready to kick this thing out the door and never buy Toshiba again.
But before I do this does anyone know of a solution?
Thanks

Updating the driver does seem to have fixed the probem.
Thank you very much!
Now if only I could get VT working the laptops stay of execution could last significantly longer!
I do recommend installing a 7200rpm drive for this particular model. The one Toshiba ships with it is appallingly slow (what were they thinking).

Need new graphic card for my Satellite Pro P100

Hi
My Toshiba Satellite Pro P100 has no display from screen or external monitor it has a seperate Nvidia Geforce go 7600 graphics Card.
Can any body tell me were I can get a replacement card?
Thanks

How you know your notebook has separate graphic card?
Have you had success to remove it from the mainborad?
Sorry about these questions but Im a little bit confused. As far as I know graphic card is part of mainborad and cannot be replaced separately.
http://195.182.196.33/kb0/FAQ7A01ZW0007R01.htm

How to connect the Satellite Pro P100 to Hifi

I've got Satellite Pro P100. How to connect this notebook to HiFI
This is probably easy, but what can i say... just call me stupid.
I've got the lead that goes out of the headphone jack, it links up to my hifi nice.
Trouble being, there's a nasty hiss in the background. Tried plugging my boys mp3 player into the lead, and that works fine.
Any chance of some help... thanks

Hi
In my knowledge you can connect the Sat Pro P100 to HiFi only via a 2-RCA Audio Y cable adapter. In my knowledge the notebook does not support the S/PDIF audio out so you will be able only to use an analog sound port.
You could also buy a stereo adapter with 2x cinch jacks to connect the notebook to the Hifi. Such adapter can be plugged into the headphone jack
Check this:
stereo adapter
I think you should visit the nearest notebook dealer. He can show you the right and supported cables and adapters.

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

Satellite Pro P100 (PSPA4E) - No Sound Following Win 7 Clean Install

Hello, A European friend really struggling and looking for help.
I have just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 (PSPA4E) which was purchased in November 2006. It was previously running XP and I never installed Vista though the laptop is badged Vista Capable) I followed the Win 7 bios/driver/software install order but I now have no sound at all. Everything that I have tried so far has failed to fix it.
The laptop has a Conexant based audio solution with harman kardon speakers. Win 7 has installed the following driver which reports the following info.
High Definition Audio Device (Microsoft Driver version 6.1.7601.17514 dated 11/19/2010) and Device status: This device cannot start. (Code 10)
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000 HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
There is a second exclamation mark in Device Manager for a further unknown device / uninstalled driver (showing code 28) for a device with a Hardware ID of ACPI\SMCB000 but I do not know what this device is!
Does anyone have any suggestions on a fix for my sound issue?
Thanks!
Martyn

Any one have any thoughts on this issue?
I have failed to locate a working / compatible Windows 7 x64 driver for Conexant HD Audio!
Perhaps there isn't one?
Perhaps I need to try harder?!?
Perhaps the on board sound solution featuring Conexant HD Audio is simply ****** as on www.conexant.com they say manufacturers have TOLD them NOT to make drivers available (... to poor unfortunate users)!!!
I think that manufacturers need to step up to the plate and support / help their customers. I own 4 Satellite Pro laptops running Vista x32 and Windows 7 x64. This one cost me well over £1,200 so I don't want to hear or conclude that it is simply scrap! That would represent truly poor value for money - the kind of business case that would undermine my belief that Toshiba laptops are the best in the business.
Ditto Microsoft - the Windows 7 x64 Upgrade Advisor tool gave me the all clear to upgrade this system. All generally appears fine EXCEPT the lack of sound.
Having now been exposed to the experience of many other laptop owners set out in various forums etc, covering both Toshiba laptops and some other major brands, I have to conclude that the Windows 7 Upgrade Advisor is flawed and that a successful upgrade is somewhat hit and miss affair. Beware!
That said, still hopeful that someone out there will be able to help me fix this issue?
Regards
Martyn
P.S. I can be reached by any Toshiba or Microsoft technical support guru looking to make a difference and help me out.

Satellite Pro P100 - Battery fails to recharge

Hi.
I have an old Toshiba Satellite Pro P100, a refurbished model, which I got 2 years ago.
It has worked fine ever since I got it, but I went overseas for a month and left my laptop at home.
When I returned I found that the laptop battery won't recharge.
The battery power indicator on my desktop says 0% and it requires constant connection to the mains to work.
I've looked through the manuals, all they tell you is that a flashing orange light means low battery, but not what to do if it doesn't change.
I also looked online, but they don't help either.
What I want to know is whether there is a way to fix my battery or if I need to buy another.
Thanx

Hi
It looks like battery fault.
But check the battery connection firstly.
Remove the battery and after short time connect it again.
If this will not help then you should replace the battery and should test the notebook using new battery.
Greets

Satellite Pro P100: Where can I find the preinstalled software?

Hi all, i recieved my satellite pro p100-327 today. From what i've read in the manual the recovery cd included is just a copy of windows? If i want to reinstall windows where can all the programs preinstalled on the laptop be reinstalled from? Is there any way to make a boot disk as such?
Thanks for the help all.

I will try to bring light into this case
The Toshiba recovery CD contains a OEM version of the Windows XP operating system and all the Toshiba drivers, tools and utilities are a part of this CD.
Simply said, after usage of the Toshiba recovery CD you will get the notebook with factory settings.
If you need only the Toshiba drivers or tools you can create a own Tools & Utilities CD.
This option can be found in the Toshiba Assist under --> Protect & Fix -> Create Drivers & tools CD
All the drivers are also placed on the Toshiba driver page

Toshiba drivers for WXP and VISTA fpr a Satellite Pro P100 - PSPAH

Hello.
I need help. I bought a Satellite pro P100 - PSPAH with Vista Premium Home edition as recovery version. Now I want to install a second OS like WXP on this notebook. The problem is that WXP didn't found 3 drivers. For Sound, LAN and a other device. Because of this I update my notebook with the latest chipset drivers, but the problem is still there. Vista has now problems with the drivers, too. I cannot find the special driver on the main page from toshiba.
mfg jens

Hi
I understand your problem At this time I prefer also the XP instead of the Vista OS.
The Vista needs simply too many notebook resources and all the applications and 3rd devices are not 100% supported by Vista.
But what to say dude seems you have to search for compatible drivers on chip manufacture sites.
Download and install a tool hardware diagnostic tool called Everest or similar one and try to find out what LAN and sound chips are used in your notebook!
Then you could search for the drivers on Intel, Realtek, etc.. pages
Do you know the Toshiba Canada driver site???
http://209.167.114.38/support/Download/ln_byModel.asp
There you will also find some Pro P100 series. Try these drivers. It's worth a try.

Satellite Pro P100 - Screen stays blank

Similar Messages

Maybe you are looking for