Satellite Pro P300 Numeric keyboard at same time as alphabetic keyboard?

Hello,
I'm new here, and english isn't my mother tongue, then, please be indulgent ;-)
I have a problem with my numeric keyboard.
It is not possible to make it work in the same time as the alphabetic keyboard.
When I press numlock to make it work, it also change the alphabetic keyboard in numeric.
Example : numlock on uiojklnm, = 456123n0,
I have a QWERTZ keyboard.
Thanks for your help
cheers
Val

Hello,
I have the exact same problem since ever: same machine, same symptoms.
I have just upgraded BIOS, also upgraded from Vista to Win7 and the problem remains. Pressing Fn+F11 toggles NumLock as in a laptop with small keyboard, so I have two keypads active on none!
An external keyboard works ok; Something curious: accessing other PCs using Logmein it works ok local and remotely (!)
Please advise!!
thanks,
Message was edited by: PetterTosh

Similar Messages

Satellite Pro P300 has just died on me

Hi,
Yesterday my Satellite Pro P300 (PSPC1E) simply died on me...no battery charging lights nothing. Nothing happens when I press the ON button it is DEAD.
The battery was ok last time used, the adapter is still giving me nearly 20volts.
I took the laptop apart to check the DC in connector, thats ok.
I assume after some research its a motherboard fault. Typically my warranty ran out 2 months ago!!
Cost of a new replacement motherboard so far quoted is 180, not too eager to spend that as I have a tax bill to pay at the end of this month!
Any ideas to what the problem could be?
I have found a mobo on eBay which is a p300-1a8 going for a song but would that be compatible?
What are all the variations in the motherboards?
Would any other motherboard be compatible?
Any ideas, suggestions would be much appreciated and I thank anyone in advance for any ideas.
Cheers
Steve

Yes and no.
You can also imagine that different P300 notebooks have also different ports. Some of them have HDMI some probably not. There is also the difference.
Different ports, different processor or different graphic card. Maybe some models don't have even webcam and missing controller on motherboard.
So, if you want to have identical hardware configuration please be sure you use motherboard with the same model number.

Satellite Pro P300-1CG wakes up from sleep mode when unplug USB mouse

I often transport my laptop from one working place to another.
Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
However every time I unplug the USB mouse - the laptop wakes up and I have to put it into sleep again.
This is annoying. Is there any way to set up laptop _not_ to wake up on USB activity?
I didn't find any option in power settings of Vista, neither in BIOS.
My BIOS is up to date (just updated, but didn't help).
I use Windows Vista Business on Toshiba Satellite Pro P300-1CG.

Hi
> Usually put it into sleep mode, unplug the USB mouse and lay in the bag.
Why you dont unplug the USB mouse firstly and then put the notebook into the sleep mode?
This would solve your issue ;)
From my knowledge the BIOS provides only the options: Wake-up on keyboard and Wake up on LAN.
There are no options for Wake up on USB and therefore such settings cannot be changed...
Cheers

Satellite Pro P300 - HDMI output port doesn't fit

Hello All,
Well this is starting to drive me to distraction and Im hoping theres someone who can put me out my missery lol.
I have been trying to hook my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable I use for my PS3 but the connector just wont fit. I keep finding all these posts in various forums saying how they cant get sound out the HDMI connection...that would be great, as at least that means they have them connected.
Are there different connections for HDMI? The one I have is diagonal connector but the port on the laptop is more square, and just doesnt fit. So if there isnt a connector, does that mean I have a funky port, on the laptop.
There is also the matter of connection my laptop to my amp that controls the surround sound system. What connection is best to use, as there is no real audio out connections?
Cheers

Hi
Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
Maybe you can also post a picture of the HDMI port. Normally there are no different HDMI ports, all have the same physical dimension.
Im not PS3 owner but maybe it has a special connector. Have you tried another cable?
Regarding the audio connection I use the normal line out port for my external speakers. Did you test this?

Recovery CD for XP in combination with dual HDD on Satellite Pro P300

On my Satellite Pro P300 there are two harddisks, both 160 GB.
At the moment Windows Vista Business is installed, as it was preinstalled.
On the first disk there are 3 partitions, one EISA-partition, one Vista boot-partition and one partition for HHDRecovery (contains image for Vista Product Recovery).
In Vista there is an option for Complete PC Backup. This provides the possibility to completely restore Vista to the situation at the time of the backup.
I made a Full PC Backup of the complete first hard drive (3 partitions) and saved it on the second harddrive.
Now I want to use the provided Toshiba Product Recovery for Windows XP to install Windows XP on the laptop.
I assume that the first harddrive will be completely overwritten, but I am not sure if the second drive will also be overwritten.
Does anybody know if my data on the second drive will be lost when i use the Product Recovery for XP?
I would like to preserve the data on the second drive, because it gives me the option to restore the laptop to the situation with Vista without reinstalling/activating all applications.
Also all my personal files are on that drive.

Normally it would be no problem to temporarily remove the second harddisk.
But I am not sure if my warranty will be void after that; the machine is only a few weeks old.
If the warranty is still valid after removing and reinstalling the second harddisk, I will try that option.
I just wonder if anybody knows for a fact that it does not write the second harddisk.
As you said, I also assume that it will not write the second harddisk, but I just want to be sure.

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

Satellite Pro P300-26U - Can I use a second HDD?

Satellite P300 family support raid0 and double HDD. All model? User manual of 26U don't say any word about this. Model like P300-1BP has double HDD.
Can someone help me? I want to buy a P300-26U in Italy.
Thanks.
Guido

Hi
The Satellite P300 series doesnt support RAID!
There is NO RAID controller on the motherboard.
But you are right; the Satellite Pro P300-BP supports 2 HDDs but this does not meant that it would support RAID!
Furthermore you should know that P300 series supports different hardware specifications.
This means that not all P300 would be able to use 2 HDDs!!!
It could be possible that Satellite Pro P300-26U is not able to use 2 HDDs even though the Satellite Pro P300-BP support 2 HDDs.

Satellite Pro P300 - unable to activate the inbuilt microphone

I purchased a Satellite Pro P300 some 2 months ago and to date all is well.
It has a webcam which I really thought I would not have any use for it but now find that I have.
The camera works fine but I am unable to activate the inbuilt microphone.
Can someone point me in the right direction please

Hi
You have to start the webcam software if you want to use the internal mic too.
The point is that the internal microphone is connected with the internal webcam and the webcam software controls the both devices.
Please check also if the internal mic was enabled in the webcamsoftware correctly
Furthermore I would recommend updating the sound driver.
Best regards

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

Go to the Info inspector for the still image and in settings select the alpha type.

Satellite Pro P300 (PSPC5E) - Webcam driver open fail on Windows 7

I've installed the RC of Windows 7 64 Bit on my Satellite Pro P300-PSPC5E and I'm experiencing problems with the configuration of my webcam and microphone.
I've tried to install the camera assistant software, 64-bit (windows vista) to configure the webcam but I keep getting an error with 'Webcam driver open fail. Please restart camera or computer.' neither of a camera or computer restart work. I do get picture in Skype but I can not edit settings or so (dark picture) and the microphone is way more silent then it was on windows XP, although it's set on the maximum sound.
Is there a solution for this problem? I hope so :)

Hi
I think there is no solution for this problem at the moment because you are using a Release Candidate of Windows 7 and at the moment there are no official drivers for Windows 7 available.
You have already tried the Windows Vista driver so thats all what you can do. Alternative you visit the Toshiba US page (http://www.csd.toshiba.com) and search for Windows 7 beta driver. Maybe it works.
Good luck! :)

Satellite Pro P300 - How to obtain the factory image without media?

Hello
I have been given a Satellite Pro P300 and it has the recovery disc for win xp, I would like to go back to the pre installed Vista intallation if possible.
The recover partition on the hard drive isnt available so i assume it cant be recovered. Is it possible to purchase a factory image?

Liam is right Win 7 is better than Vista OS.
So if you have a possibility to install Win 7 I recommend doing this instead of Vista.
However, the Toshiba recovery disk contain just Vista OS.

Satellite Pro A200: What keyboard is compatible?

Hi
I have a notebook Toshiba Satellite pro a 200 and I need to change keyboard.
The problem is to find the keyboard exactly for this model.
Could anyone tell me does any keyboard for another Toshiba suit to my notebook?
For example I found a keyboard for Toshiba satellite A200 and it looks very similar (the biggest difference is color) but I am not sure that would work.
Thanks for any help and sorry for my English;)

Thx. You had right:). But i have a problem again:(. To be honest i bought this keyboard cause few months ago i spiled a cola on my toshiba: (Lucky i lost only keyboard (i thougt so).
Every single buttom i pushed started always an internet explorer (when internet explorer was open pushing any buttom caused a site refresh). I could't use any web explorer. But with other keyboard( usb) was everything fine like nothing bad happen.
But now i changed keyboard (new) and i have the same problem. If You have any idea please help:> THx

Satellite Pro L650-1QG: Keyboard button mismatch

Dear audience,
i am not satisfied with the keyboard-setting of my Satellite Pro L650 1QG I5-4.
Before I had a Satellite S5200-701 which worked well for almost 8 years after i have replaced almost any critical component at half-duration.
However, finally the Controller was out of order and last week the Laptop was not functioning anymore after this problem resided for half a year but the Laptop did not fail until last week which prompted me to install and use my new laptop.
I felt very comfortable with my old laptop and his settings.
However, the new laptop has an akward setting of its keyboards.
"ALT GR" is replaced with respect to my old keyboard and now the "CTRL" button has exactly the same position as on my old laptop so that it is possible that I write an "CTRL Q" when i liked to type "ALT GR Q" or "@" which happens quite often and shuts down the program (EXIT).
How can this problem be solved. Is it possible to get a fix? Either by replacing the CTRL-button with a deaf one or by changing the setup of the Computer?
I am not sure that I can adapt to this problem since any "normal" keyboard is different and looks like that of my old laptop and working with a USB-Keyboard is no solution!
Thanks, Headlost

Hi
> However, the new laptop has an akward setting of its keyboards. "ALT GR" is replaced with respect to my old keyboard and now the "CTRL" button has exactly the same position as on my old laptop so that it is possible that I write an "CTRL Q" when i liked to type "ALT GR Q" or "@" which happens quite often and shuts down the program (EXIT).
I think there are no many options for youYou used a keyboard which supported a different layout the L650-1QG supports the 102(Euro) A4+10key flat standard black keyboard this might be different to the older Satellite 5200-701 keyboard.
Not sure if you could replace the keyboards because of the measures so maybe the one and only option for you is the usage of external USB keyboard which would be similar to Satellite 5200-701 keyboard

Satellite Pro P300 - After Truesuite update I can't open protected files

Hi,
sorry for my bad english but I came from Italy and here we don't have any forum who can resolve my problem.
I've got a Toshiba Laptop pro P300 with fingerprint reader. I use fingerprint to logon and protect some files, just for curiosity, it seemed cool...:|
The problem born when I recently update "truesuite access manager". Since I did the update I can't open protected files, I didn't read that I have to remove the protection before the updating (damn...), but these files are important for me and I have to open them again.
To resolve the problem at first I restore the system before the date of the update, to have the old version and open these files again, but all my fingerprints are deleted and I can't create new fingerprints because the pc says that it "can't open the sensor". I don't know what it means.
I thought that it needs some drivers, so I reinstalled truesuite access manager several times, I reinstalled BIOS, I've done the scan disk and the toshiba diagnostic, but the sensor still doesn't work.
I think that if I can save a fingerprint with the old version of the program I will able to open protected files again (and I will not protect them anymore) because only the old version of the program knows how to decrypt these files, but I don't know how to turn the fingerprint sensor on. Someone could help me, please?
Thank you so much!

The Truesuite update come from the Toshiba website. I can open the Truesuite program with my fingerprint but I can't decrypt files because it says that I don't have the correct "key of protection" or the "protection code keyAC 3000" of the file.

Toshiba Satellite Pro-P300 PQ

Hello,
My notebook which is 5 years old and has been working without any problem, has suddenly developed a fault I do not seem to be able to sort out. It starts off ok and gets to the "Toshiba Leading Technology" screen and that's it. It will not do or response to anything. I have tried to enter the boot up menu by powering up and holding the F12 key, it acknowledges it and says "please wait" but nothing happens. The same applies to "Set up" key F2 and F8. There is absolutely no response and
the HDD led light does not illuminate.
I have not installed or altered anything. It is running Windows 7 and I do have the recovery disk and the original W7 installation disk but they are useless if I cannot access the booting up option.
I have also removed the HD and connected it by USB link to my working desktop and can access all my files and programs so there does not seem to be anything wrong with the disk either.
Can anyone offer me any suggestions?
Many thanks
Tony

Satellite Pro P300-19Q (PSPCDE-009005EN)
Downloads here.
Best to post in the European forums.
Toshiba Support Forums in Europe
-Jerry

Satellite Pro P300 Numeric keyboard at same time as alphabetic keyboard?

Similar Messages

Maybe you are looking for