Satellite Pro P300 - PSPCDA-01L00D - DVD not found after Windows 7 upgrade

After performing a clean install of Windows 7 Home Premium, then downloading the necessary drivers from the Toshiba support website there are issues with the DVD player in my laptop.
I downloaded the Toshiba DVD Player application, which auto detects which version you need. After allowing the application to run, I get the message "No Toshiba DVD installation could be found! You can only update an already installed version."
How do I get the DVD player to be recognised, so the application will install. Currently the DVD player will not play DVDs - which will be an issue for my daughter who is using the laptop.
Also, the Windows 7 driver page mentions updates will be available through Toshiba Service Station, but provides no link. A search of the Toshiba website fails to locate it, where do I get this utility from?

Hello
I agree with Mike30. As you can see on Toshiba website, its just an update but no full version. Full version of DVD player is only preinstalled on your notebook and included in Toshiba recovery disk.
But in my opinion you dont need additional DVD player software. Its a little useless but thats my personal opinion
I prefer the allround tool VLC media player because it can play all known audio and video files. Its small and freeware player and I can recommend it.
Have a look on VLC media player page:
http://www.videolan.org/vlc/

Similar Messages

Satellite Pro U400-15I - Sound Wheel not working after Windows 7 install

The sound wheel on my Satellite Pro U400-15l does nothing after the Windows 7 clean install from XP pro.
I used the recommended Software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - just not under the control of the wheel! Also the Toshiba Power control is not there but this is not a problem.
Any suggestions welcome.
Bob Sheppard

Hi Syntax,
there is no option to add the volume control to the taskbar in the control panel.
The sound driver is 'Conexant High Definition Smart Audio 221'
Interestingly, when I click on the speaker icon on the taskbar and select the mixer option I get 3 sliders called 'Device','Applications' and 'Sound Volume Indicator of Toshiba Control'. If I move this slider with my mouse I get the indicator I am looking for ( The Toshiba indicator I had under XP). However, this slider only works as a 'minimum' for the other sliders.
Thanks for your help but I still would like that volume indicator back!
Bob Sheppard

Pavilion dv4 1404 tu fingerprint not found after windows 10 upgrade

After upgrade to windows 10 pro 32 bit from windows 7 ultimate , i found out that my Fingerprint reader is not working . i installed digital persona from drivers of my laptop but it says fingerprint reader not detected . Help me

Hi, Thank you for posting this. You may want to try HP Support Assistant - http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.VdCsr0ZrhOg This is great tool which you can use for various thing. It can scan your computer and provide the best drivers available for your system.

CD/DVD Not Working After Windows 8 Upgrade

I have an old Pavilion dv6917nr laptop. After upgrade to Win 8, CD/DVD drive is not shown in device manager or computer folder. Noticed problem when Windows Media Player would not play CD

Hi:
See if the automated windows fix it tool works for you.
http://support.microsoft.com/mats/cd_dvd_drive_problems/
If the auto fix doesn't work, try the manual fix under the section labeled "Let me fix it myself."
http://support.microsoft.com/kb/982116
Paul

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Satellite Pro A200 - Fn keys does not work with Windows Vista

Hello,
I own a Satellite Pro A200-PSAE7E and a retail license for Windows Vista Ultimate 32bit (with SP1) installed on it.
Before installing Vista, I upgraded the BIOS to the most recent version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20-WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]
After the successful installation of the operating system, I installed the "Value Added Package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) which contains the "Flash Cards Utility". In my understanding, the installation of the "Value Added Package" should enable the Fn keys usage.
This doesn't seem to be true or not completely true.
Here is what happens.
- Before the installation of the "Value Added Package" all the Fn keys didn't work.
- After the installation of the "Value Added Package", if the TCrdMain.exe process is running, all the Fn keys don't work.
- If I remove the TCrdMain.exe from the startup and I reboot the PC, only some Fn keys work (Fn+ESC, Fn+F1).
There is no way (or I didn't find a way) to make all the Fn keys working.
Does anybody know how to solve this problem?
Thanx in advance,
mme000

I do not know for sure but it can be because of SP1. I have installed Vista Ultimate on A200 and all listed stuff (drivers, tools and utilities) from Toshiba support page.
Does your installations Vista DVD contains SP1 or you have installed it on your own? If you install Vista Ultimate (without SP1) and all stuff from Toshiba support site following Installations Instructions order.

Satellite Pro P300 (PSPC5E) - Webcam driver open fail on Windows 7

I've installed the RC of Windows 7 64 Bit on my Satellite Pro P300-PSPC5E and I'm experiencing problems with the configuration of my webcam and microphone.
I've tried to install the camera assistant software, 64-bit (windows vista) to configure the webcam but I keep getting an error with 'Webcam driver open fail. Please restart camera or computer.' neither of a camera or computer restart work. I do get picture in Skype but I can not edit settings or so (dark picture) and the microphone is way more silent then it was on windows XP, although it's set on the maximum sound.
Is there a solution for this problem? I hope so :)

Hi
I think there is no solution for this problem at the moment because you are using a Release Candidate of Windows 7 and at the moment there are no official drivers for Windows 7 available.
You have already tried the Windows Vista driver so thats all what you can do. Alternative you visit the Toshiba US page (http://www.csd.toshiba.com) and search for Windows 7 beta driver. Maybe it works.
Good luck! :)

Satellite Pro A200: Card Reader does not work after XP installation

Hi...
I have removed Windows Vista from my Satellite Pro A200 in favour of XP Home.
I'm much happier with the machine now but am unable to get any response from the Card Reader. There's no mention of it in the User's Manual that came with the machine.
I can't find any reference to it in the Control Panel's Hardware Manager and nothing changes in there when I insert an SD memory card.
I didn't have cause to try the reader prior to removing Vista, so I don't know if it ever worked... although I imagine that it did.
Running a search for a driver in the download section didn't have any success and this forum has no direct answers.
Does anyone have any idea what I need to do to get this to work?
Popa Mintin.

Hi
I dont see any serious reasons why your card reader shouldnt run/function with installed Windows XP.
What you need is the right driver.
The Toshiba driver page provides all Win XP drivers and there is also an XP driver for the multi card reader.
You need a Texas Instruments Flash Media Driver. This is a driver for your Bridge Media Slot.
This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
Cheers

Compaq Presario CQ62 DVD not working after Windows 7 automatic install of upgrades

The DVD in my Compaq CQ62 stopped working after Windows 7 automatically installed updates. The driver seems to be corrupted. When I open Device Manager, the DVD comes up as hp DVD RW AD-7701H SATA CdRom Device and the device status displays...A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32).. There are two drivers installed--cdrom.sys from Microsoft, File Version 6.1.7600.16385(win7_rtm.090713-1255) and PxHlpa64.sys File Version 2.03.32a from Sonic Solutions. If anyone knows the link to download the new driver or how to resolve this problem please let me know.

We are not sure what might have caused this issue. You may try removing the affected filter drivers and check. This has helped few.
To do this, follow these steps:
1. Click Start , type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.
Note After you remove the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall any affected programs.
See which Windows updates are installed
http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

MSVCR80.dll not found after trying to upgrade itunes

Tried to update my itunes and now I can't open it all...I get a MSVCR80.dll not found. Itunes not installed correctly Error 7 (Windows error 126)....How do I get the MSVCR80.dll file back????

See solution posted by turingtest2

Libc.so.6 GLIBC_2.16 not found after attempting to upgrade pacman

Ok so I followed the thread (https://bbs.archlinux.org/viewtopic.php?id=95007&p=1) as best I could and ended with this error:
/lib/libc.so.6: version `GLIBC_2.16' not found (required by /usr/lib/libcurl.so.4)
The script I used is:
GNU nano 2.2.6 File: PacmanFix
#!/bin/bash
arch=x86_64
mirror=ftp://mirror.rit.edu/archlinux
# link to cache (or download) and extract: openssl,libarchive,libfetch,pacman
cd /tmp
for pkg in openssl-1.0.1.c-1 libarchive-3.0.4-2 pacman-4.0.3-3; do
pkgname=${pkg}-${arch}.pkg.tar.xz
if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
ln -sf /var/cache/pacman/pkg/${pkgname} .
else
wget ${mirror}/core/os/${arch}/${pkgname} || exit 1
fi
sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
done
for pkg in curl-7.28.0-1; do
pkgname=${pkg}-${arch}.pkg.tar.xz
if [[ -e /var/cache/pacman/pkg/${pkgname} ]]; then
ln -sf /var/cache/pacman/pkg/${pkgname} .
else
wget http://arm.konnichi.com/2012/07/26/pool/packages/curl-7.26.0-1-${arch}.pkg.tar.xz || exit 1
fi
sudo tar -xvpf ${pkgname} -C / --exclude .PKGINFO --exclude .INSTALL || exit 1
done
# now reinstall using pacman to update the local pacman db
sudo pacman -Sf openssl libarchive libfetch pacman || exit 1
# now update your system
sudo pacman -Syu
I have found this thread on the problem but so far I have had no luck resolving the issues
https://wiki.archlinux.org/index.php/De … iki:usrlib
I have attempted to use the current version of curl, and curl7.26.0-1
also the pacman -Syu --ignore glibc,curl has not worked.
I am fairly new to Arch linux but am reasonably competent with computers. I have unfortunately inherited the computer and would really like to get it working again.
Thanks for the help!

masteryod wrote:
Walk us through. When and how did you install Arch and when was the last time you did upgrade? I've got hard time to understand you haven't done upgrade since july.
PS What was your previous distro? (I don't want to brag, just tell you some differences between Arch and other "easy" distros)
Ok as I said i unfortunately inherited the computer, so I was not the one to go through the install of Arch.
I have been using the computer without upgrading, but I would really like to get the computer working properly.
The last upgrade was probably performed around a year ago. Please let me know any other specific information that would be useful.

Z580 Dolby digital plus not working after Windows 10 upgrade

Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

"Title" Coloum in infopath form is not populating after windows 7 upgradation

Recently we have migrated from Windows XP to Windows 7(64bit)
Afterwards, when we are submitting the infopath forms, the "title" filed is not populating with the "filename.xml".
We are using Infppath 2010(not sure whether its 32/64bit.
Any one facing the same issue? is this a BUG in 7?.. Its been affected with all users using win 7 machines...
NB: In default the "title" column is said to be populated with the filename.xml. No workflows associated with it. Still working fine in XP machines and not in Win7
Also i have tried changing the "title" column as mandatory. But this doesn't help. I have not found any help while i Google also.....

Hello,
I have windows 7 machine and haven't had any problem with this. You may try to clear infopath cache in machine and also re-publish the form.
>the "title" filed is not populating with the "filename.xml".
are you giving any title for saving the file? If you are prompting any field then check again in form and also check form submit connection.
I would also prefer any snap of your form if possible so we can understand the problem.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

VN7-791G all bluetooth devices like Logitech mouse not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

VN7-791G bluetooth devices not working after Windows 10 upgrade

After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7. All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated 21/6/2006). Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10. I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck. I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom. The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.

Yay! Success at last! Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting. This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.

Satellite Pro P300 - PSPCDA-01L00D - DVD not found after Windows 7 upgrade

Similar Messages

Maybe you are looking for