Satellite Pro S300-11F drivers

Hi,
I cant find this model in the lists or anywhere...
Satellite Pro S300-11F
Please help to find latest updates for display drivers.
Thanks,

See my answer to your other identical post HERE.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

How can i do to recovery Satellite Pro S300

Hi ...
I am Frman From Kurdistan Of Iraq
thanks for this forums to take all outfit .
I want help me for recovery my laptop.
How can i do recovery my laptop toshiba sattelite pro s300 with all driver but i depletion my data in my laptop to recovery.
Can you help me? send me data to recovery .
Thank you

Hello Frman
The whole story is very simple. To learn how to identify and find drivers for your notebook do as follow:
# Go to http://www.toshiba-tro.de/unitdetails and put X8016403H serial number there. You will see there exact name and model number of your notebook.
# According model name you have US notebook model so go to US support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
# Click on download and choose Laptops > Satellite Pro > S300-EZ2501
# All stuff you need you can find now.
Please note: recovery image is not downloadable and you will not be able to find it. I presume you don't have original Toshiba disc. So your best option is to install supported operating system using Microsoft installation disc. All necessary drivers, tools and utilities you can find in US Toshiba download section.
If you have more questions please let us know.

Satellite Pro S300 EZ1514 - Cannot initialize Solid State Drive (SSD)

I have a Satellite Pro S300 EZ1514.
Recently I purchased a SATA II Cavalry 64GB SSD to replace the current hard drive. First I tried to install XP with SATA drivers streamlined in.
The install process recognized the SSD and did the initial file copy to it, but when it restarted to continue the install process the system would not boot from the drive.
Then I tried installing Vista Business 64 from the recovery disk that came with the laptop.
After initiating the recovery disk, the install process said the hard drive was not Initialized and to click OK to initialize now.
After clicking OK to initialize the system restarted only to end up on the same screen telling me to initialize the hard drive.
Then I tried to initialize the drive manually off of my desktop.
Plugged it into my desktop, initialized it and formatted it to NTFS. Plugged it back into the laptop to try Vista recovery again. And yet again the same screen shows up. Plugged the SSD back into the desktop only to find that the drive was no longer initialized and had to be initialized again.
Then I gave up and installed the SSD to my desktop as primary boot and it installed perfectly fine with XP. For testing purposes I then put the ssd with the pre-installed XP back into the laptop to see what happens. To my dismay the laptop would not boot and on top of that when I put the SSD back into the desktop only to find that the drive was no longer initialized and I had to reinstall XP again.
Conclusion:
It seems that the Satellite Pro S300 series is not SSD friendly and just the post it self de-initializes the Solid State Drives.
This seems like the logical conclusion as the SSD works perfectly fine on my desktop and the laptop is fine now with the old spinning hard drive back in.
Anyone else have this problem or a solution?
I would still like to put the SSD into my laptop for power saving.

Im using AHCI mode, but for testing I tried both and neither one worked. My bios is already up to the latest version and unfortunately the Cavalry site does not have any firmware updates yet. Again I don't think the drive is bad cuz it works perfectly fine on a desktop that had the same intel chip set and SATA controller. I think it's the custom boot agent that Toshiba uses at boot. Anyone know how to disable that agent and the intel boot agent as well? I read somewhere that the agents are not needed for the boot process and that in some cases they do cause issues like mine.
Message was edited by: RanChanGT

Satellite Pro S300-121: Win 7 64bit installation: yes or no

i have win7 32bit on my Satellite Pro S300-121.
I have 4gb of ram installed.
Should i install the 64bit version or will i not notice any difference in speed?
I know i have to do a clean install but is it worth it for the S300-121 any pros and cons either way, your thoughts

> Should i install the 64bit version or will i not notice any difference in speed?
Generally speaking yes but before you do anything check Toshiba download page at first and be sure Win7 64bit is supported for your notebook model.
If not than leave it. There is no sense to use non-supported OS without right drivers and Toshiba specific tools and utilities.
In the past many people have had such problems.

Satellite Pro S300-EZ1512 no sound

I recently reformatted back to XP Pro SP3 from a machine that came with stock vista. I manually updated all drivers with no conflicts. I have installed and uninstalled>reinstalled my audio drivers along with all other drivers, one at a time with restarts in between. Device manager says my audio device is working properly. Volume is up nothing is muted. Yet there is no sound. Not from the internal speakers nor from the headphone jack. Everywhere I look everything is supposedly working properly yet clearly that is not the case. Any help greatly appreciated.
Edited to say:
Yes I even uninstalled and let windows detect the audio device itself. Which it did, and installed with no conflict but again- still no sound.

For what its worth:
    Machine name: COMPUTER_1
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite Pro S300
               BIOS: v1.90
          Processor: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (2 CPUs)
             Memory: 1914MB RAM
          Page File: 691MB used, 3115MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.2600.5512 32bit Unicode
            Description: Realtek HD Audio output
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0268&SUBSYS_11790602&REV_1000
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: RtkHDAud.sys
         Driver Version: 5.10.0000.6043 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 2/8/2010 12:15:44, 5860384 bytes
            Other Files:
        Driver Provider: Realtek Semiconductor Corp.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
               Registry: OK

Satellite Pro S300 - HDD in caddy is not recognized by BIOS

I have replaced the original HDD and installed a new SSD which works fine.
Installed the W7Pro and all updates.
I do not use my CD-Writer so I replaced the CD-drive and installed a caddy with my old HDD to have more diskspace.
When I boot my laptop I see a message CD-ROM ERROR.
In device manager the caddy and or the HDD are not shown.
I tried to change settings in the BIOS (according Toshiba utility the latest version) but even in the Bios is no information about the present SSD or the installed HDD. (or the CD-Drive when I re-install this drive again)
What is wrong here? Do I need an updated BIOS that allows the 2nd HDD?
Or do I overlook a setting somewhere?
NB In the BIOS the HDD drive settingis according ACPI, in the listing below it is mentioned as IDE device.
When I enter in the BIOS IDE in stead of ACPI I still see the CD-ROM ERROR during boot and after this message the screen is blue and no further activity.
The relevant PC Information:
Model Name Satellite Pro S300
Part Number PSSB0E-02H00FDU
Serial Number 88091121H
OS Version Microsoft Windows 7 Professional 6.1.7601 Service Pack 1
BIOS Version Version 3.00
CPU Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz
Physical Memory 4096MB RAM
Hard Disk Capacity 255,953,203,200 [Byte] 238.375 [GB]
Hard Disk Free Space Capacity 200,118,833,152 [Byte] 186.375 [GB]
IDE Device V4-CT256V4SSD2
TEAC DV-W28S-RT FW version=7.0D

Thank you for the help sofar.
Indeed I do have a third party caddy. I first bought one (no brand) at MyCom. At MyCom I was told that that unit would work on my Toshiba. Well, it didn't so I returned the caddy.
Then I contacted the company note bookcaddy through internet.
They thought it should work and they have sent me a new caddy from their brand (without payment; just to try!)
They have tried a lot to help me make this unit work. But it failed until now.
Does the bios check for the message that the CD-drive is available and does it not except the message from the HDD device that it is not a CD-Drive?
Maybe I only have to change the wiring inside the caddy to let the Bios think there is a drive present?

How to enter BIOS settings on my Satellite Pro S300?

Hi
It can look stupid but I'm trying to access to the BIOS menu on my TOSHIBA Satellite Pro S300-EZ1511 and i can't, i searched for that on the manual but i couldn't find anything.
I need to go there so i can change the SATA settings to IDE so i can install windows XP system after i formatted the Vista.
Thanks

It should be in the Users Manual somewhere.
Turn on the laptop, and hold down the ESC key. Then press F1 when it prompts you.

How to boot from SD-card on Satellite Pro S300?

My windows 7 32bit based S300 has a build-in SD card reader. The Toshiba utility for making the SD card bootable comes with an error message stating Fault: 00-61-FF02-26.
Is does not see or recognize the card.
In the BIOS version 3.00 WIN there is also no possilility for booting from SD card.
The SD card can be formatted and you can read and write to the card.
Why is this not possible?

As far as I know the BIOS of the Satellite Pro S300 supports the following bootable devices:
- USB FDD,
- Primary HDD,
- ODD (or USB ODD),
- Network(LAN),
- SD-CARD,
- USB Memory, supported at the same time
So BIOS provides the booting from SD card.
You should try following way:
Insert the SD card in the SD card slot and then power up the notebook.
Then press F12 in order to get the boot menu. Now the SD card should appear in the menu

Satellite Pro S300 - Screen is blank and can't reboot

About a week ago, I left my Satellite Pro S300-EZ2502 on overnight (as usual). It was fine that night.
The next day, I had a black screen and a flashing amber light at the left side. I tried turning it off, rebooting, no dice. I have tried removing the battery and rebooting under just AC power, nothing, I have tried the opposite. Nothing. I have tried letting the battery run out and then recharge. No help. Very occasionally when I plug it back in, I will get a green light for a few seconds, but then back to the flashing amber light. Nothing EVER on the screen.
I have only had this Notebook since MAY!! what is wrong!!

This interests me, as I have three of these S series laptops and two have failed in similar manner so far.
It can be rectified temporarily by removing the battery, then pressing the start button for several seconds to discharge the capacitor (Toshiba told me to do this) and then using the power cable to start up again. It usually works.
Not very elegant to take out its guts though
My problems started in late August early September - is this significant?
Are you using XP or Vista?
Toshiba have not mended the problem despite two journeys for repair for one machine.
What does the blinking light sequence this orange light taps out mean? Nothing in the papers I have looked at.
My machines were bought in March

Satellite Pro S300 and AES1610 fingerprint scanner

To whom it may concern,
I have a Toshiba Pro S300 laptop with AES1610 fingerprint scanner.
Everytime i boot windows and has been occuring for over a week now, it continually pops up wanting to install an update for AES1610, when you select ok to finish installing software it eventually opens up Truesuite Access software, and then wants to modify repair or remove.
Please can someone help me resolve this issue.
The fingerprint sensor and truesuite software is still fully operational as well.

Hi
I had this happen with Vista, it seems that Vista is trying to install newer drivers from the Windows Update site.
Warning: this might delete your finger prints and any saved passwords in the utility so if this happens you will need to add them back, make sure you know your windows password as well to get back in.
What I did from memory.
1) Go through the setup and click Finish.
2) Go to Start - Control Panel - Programs and Features
3) Find the TrueSuite Access Manager entry and uninstall that program
4) Reboot the machine.
Then...
1) Go to Start - Control Panel - Device Manager
2) Find the Personal identification devices entry and expand to see the AuthenTec Inc entry, right click it and go to Update Driver Software and use Search Automatically. This should find the newer version that Windows wants to install from the update site, follow the wizard and that hopefully will be the end of it.
I think what is happening is Windows update is trying to install a newer version but as the older version is still on the machine it's setup program is detecting the driver/program has changed and is then prompting to re-install the older version, so you get stuck in a loop.
Hope that helps.
Regards
Phil

Satellite pro u 400 drivers

hey i need drivers for my toshiba satellite pro u400 psu4ne-002004ar, especially chicony usb 2.0 web camera
thanks

Your drivers are HERE at the Toshiba-UK site. This site is for US models only.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Satellite Pro S300-10J - Question about the microphone voltage supply

Hi there!
I would like to use my S300 10J for acoustical measurements on speakers. (DIY)
For that setup, I'm using an electret microphone, the IBF EMM-08:
http://www.etfacoustic.com/micpreamp.html
for power, this is what it needs: 1.5 - 10V / approx. 0.5 mA
Does the s300-10J supply that or not ?
Anyone that can recoomend an external soundcard that has that supply? (if my laptop doesn't )
Thanx in advance,
Bart Segers

Hi
I have a little bit searched with Google and I didnt find any details only about the microphone port. So I think this notebook is equipped with a normal microphone port as on every notebook.
I dont know if this is what you need but if you need an external sound card I can recommend Creative sound cards. I use Creative sound cards for years and I have good experience with it. For notebooks are special sound cards available that you can put in the express card slot for example:
[Creative Sound Blaster X-Fi Notebook|http://uk.europe.creative.com/products/product.asp?category=209&subcategory=669&product=1 7988&utm_source=de.creative.com&utm_medium=banner& utm_content=featurepg_soundblasterxfinotebookprodu ctinfo&utm_campaign=featurepage]

FN keys not working Sat Pro S300

My FN keys are not working. I have a Satellite Pro S300-EZ1512. Windows XP SP3.
I do not have the flash card app when I go to Toshiba Utilities. I tried installing everyone of the Flash Card downloads on the support page. Each one said at the end "operation failed' except Version: 1.59.0.2C but after I restart the FN keys still do not work. The BIOS is ver 3.0.
Any suggestions on how to fix this would be appreciated.

Hi !! You might try here.
Dokie!
Try here! http://forums.toshiba.com/t5/tkb/communitypage?sort_by=-topicPublishDate&page=1&restrictionStates=no...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Toshiba drivers for WXP and VISTA fpr a Satellite Pro P100 - PSPAH

Hello.
I need help. I bought a Satellite pro P100 - PSPAH with Vista Premium Home edition as recovery version. Now I want to install a second OS like WXP on this notebook. The problem is that WXP didn't found 3 drivers. For Sound, LAN and a other device. Because of this I update my notebook with the latest chipset drivers, but the problem is still there. Vista has now problems with the drivers, too. I cannot find the special driver on the main page from toshiba.
mfg jens

Hi
I understand your problem At this time I prefer also the XP instead of the Vista OS.
The Vista needs simply too many notebook resources and all the applications and 3rd devices are not 100% supported by Vista.
But what to say dude seems you have to search for compatible drivers on chip manufacture sites.
Download and install a tool hardware diagnostic tool called Everest or similar one and try to find out what LAN and sound chips are used in your notebook!
Then you could search for the drivers on Intel, Realtek, etc.. pages
Do you know the Toshiba Canada driver site???
http://209.167.114.38/support/Download/ln_byModel.asp
There you will also find some Pro P100 series. Try these drivers. It's worth a try.

Satellite Pro A200 - need Win7 drivers & FN buttons functionality

Hi,
i have little problem with my Satellite Pro A200-29N. I installed on him win7 and now i can't find drivers (only finded ValueAddedPackage).
The second are FN buttons they doesn't works :( befor i have WinVista

unfortunately no. I have 32-bit but I found driver, and only Value Added Package wanna to install and driver to ethernet. When i install sound driver or chipset driver they doesn't work.. so i download driver from realtek and it work. But still function button doesn't works...

Satellite Pro S300-11F drivers

Similar Messages

Maybe you are looking for