Satellite Pro U200-10I - How to disable check system on start up?

:x Hi,
I have Toshiba Satellite Pro U200-10I and I want to disable the check system as it is time-consuming for the machine start up. Is there a way to diable that?
Nedd your help!!:D

If you are referring to CheckDisk, just let it run through and it should stop running after that, until the system crashes or the power shuts off while in Windows.
If it keeps on appearing, test the Hard Disk for errors by using DFT.
DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
Restart your laptop and boot from the DFT Disc.
Choose the "Advanced" Test and let it run (it may take an hour or so).
If you see a red message box, the HDD is faulty.
An error code 0x70 means there are bad sectors and the HDD needs replacing.

Similar Messages

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • Satellite Pro U200 and APPCRASH issue (Disc Creator)

    I have problem in my laptop Satellite Pro U200 when I need to use Disc Creator (audio CD)
    Please help my to solve this problem :(
    *Problem details:*
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: ToDisc.exe
    Application Version: 2.0.0.8
    Application Timestamp: 46440bf9
    Fault Module Name: mpeg2dmx.ax
    Fault Module Version: 2.0.84.30429
    Fault Module Timestamp: 3eae72af
    Exception Code: c0000005
    Exception Offset: 0000dff3
    OS Version: 6.0.6000.2.0.0.256.6
    Locale ID: 1033
    Additional Information 1: d3a3
    Additional Information 2: fb01a2256ad7e2752c717e2443fc138c
    Additional Information 3: d475
    Additional Information 4: 02e2de344359c5cb9296e5c52491ddf3
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

    Hi
    It seems this is a common error message if an application doesnt run as it should.
    According to this short error, the applications or process called ToDisc.exe has crashed. This file belongs to the Toshiba Disc Creator software.
    In my opinion its really not easy to say why it happens but my first idea is that your have used a not compatible or not fully supported CD or DVD to burn the Toshiba image.
    The image is really a big file and therefore you should use a DVD medium. Please check the user manual to get more details!!!
    Ive got additional advice; try to use different DVD from different manufacturers because sometimes not all mediums are supported.
    Bye

  • USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

    The USB mouse will not initialize on boot-up when used via Dynadock on Satellite Pro U200. If the mouse is reseated on the Dynadock it works fine. I am using a Kensington Valuoptical USB mouse. I have tried alternative kensington mouse and had the same problem. Can anyone advise how to resolve this issue?

    Hi Jeremy
    Unfortunately I have no solution for your issue but it can also be some technical limitation. I am also interesting to buy such docking station and I would like to know if there is the same problem with external HDD or USB memory sticks.

  • Error message "failed to load Tosrfcom" on Satellite Pro U200

    hi
    I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
    after restart, even for the first time, have the following error in Event Log:
    Log Name: System
    Source: Service Control Manager
    Date: 07.07.2007 01:29:15
    Event ID: 7026
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: toshiba
    Description:
    The following boot-start or system-start driver(s) failed to load:
    Tosrfcom
    under:
    http://www.eventid.net/
    cannot find any solution !
    knows someone howto solve this problem ?

    Hi
    After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
    The driver was installed in the registry under this entry:
    HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
    I dont see many solution ways
    Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center.

  • Satellite Pro U200 - Which image viewer is preinstalled on Vista?

    hi
    Which Image Viewer will be preinstalled on Vista Business from Satellite Pro U200 PLUA1E-02802QS4?

    Hi
    Im not Satellite Pro U200 owner but I assume the normal Windows image viewer is installed.
    But I dont understand the reason of your question. You can install and uninstall what you want so doesnt be worry about this! ;)

  • Graphic Driver on Satellite Pro U200 (Vista Business 32bit CZECH)

    I experience two problems with my gfx driver.
    1) When recovering from Standby, the display goes to 1024x768 instead of going back to 1280x800
    2) When playing Lineage 2, the game crashes to Desktop and I get the error message "Display driver igfx stopped responding and was recovered". After googling a little, i figured out a new display driver for my Intel 945GM Express would resolve the problem. So I downloaded the proper driver from intel.com but I can't install it. I'm getting an error message saying "Installed driver is not verified for this computer. Ask the computer manufacturer for the appropriate driver." So I went to the toshiba website and I've downloaded the appropriate driver from there (well, the one on toshiba.com is not the latest, intel.com has a newer one). But when I tried to install it, I got the message that my computer does not meet the minimum requirements for the installation! What does this mean?! I've read the readme file and my laptop definitely meets the requirements, besides the driver I've downloaded has to be working for the Satellite Pro U200, because I've entered all the needed info for downloading the driver.
    So can someone please solve my problem? And if not, is there a toshiba support hotline or something where i can call?

    1st: Download the latest driver from the iNTEL-Page.
    2nd: !UNINSTALL! the old one, under Add/remove Programs.
    3rd: Reboot.
    4th: Install the new driver.
    5th: Reboot.
    6th: Pray ;)
    Good Luck. The error comes only when you try to install a new driver over another old one (which is from Toshiba). But Toshiba is never up-to-date when it comes to drivers, so better look for wireless, display and chipset always on the intel page!

  • I need latest Microsoft Office CD - Satellite Pro U200-125

    I just bought Satellite Pro U200-125 without CD of latest Microsoft Office set. Does any one have that CD?
    Thanks
    Musallam

    You think somebody gives you an office-cd? Maybe you want a working serial as well? Come on guy, this is not a warez-place. Go to the shop and buy it.

  • Satellite Pro U200 - Docking Station

    Can you purchase a docking station for the Satellite Pro U200?
    If so, please can you pass on a link? or the Model numbers etc.
    Thank you for your help in advance.
    Adam

    Hi Adam
    I have answered your first question about Portg docking station.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17291
    There you will find the link to the Options and Accessories site.
    On this Toshiba site you will be able to find the compatible and supported devices.
    If your notebook supports a slot at the bottom for a connection to the port replicator so you can use the docking station or port replicator as a additional device.

  • Get error message when trying a upgrade to Vista on Satellite Pro U200

    Hi,
    When I upgraded my Satellite Pro U200 to Vista (Using original CDs from Toshiba), I could not install Config Free program. When I want to install it, I receive the message "Installation image is not corrcet" Any ideas to solve this problem??
    Thank you

    Hi,
    maybe you should download the configfree again for your machine from here:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Just download it and try to install it. I cannot imagine that it wont work, Ive upgraded my A100 some time ago and everything works great.
    Btw. I downloaded all the stuff from the link above.
    Please give some feedback
    Greetings

  • Satellite Pro U200 - Bad Checksum (ROM (Data Block) ) error

    Hello when i start my Toahiba Satellite Pro U200
    I have a Error
    Bad Checksum (ROM (Data Block) )
    PRESS ANY KEY TO CONINUE.
    Pleas Help

    The most common cause for "Bad Checksum" errors is the CMOS battery malfunction on the motherboard.
    The battery could be empty or could simply be dead. But its really not easy to say whats wrong exactly!
    Therefore I would recommend firstly to access the BIOS and to set it to default settings. Dont forget to save the changes.
    Furthermore you should connect the AC adaptor and should let it connected for about 24hours to recharge the CMOS battery.
    Maybe it helps to get rid of this error message.
    If it doesnt help, then you should contact a notebook technician!

  • Re: Satellite Pro U200 - Can't install HDD protection Utility?

    hi
    Knows somwonw why I cannot install:
    18/08/08
    HDD Protection Utility
    Toshiba Windows Vista 32 Bit 2.0.0.7 World Wide
    on my Satellite Pro U200 PLUA1E-02802QS4 with Vista Business 32-bit?

    All Toshiba stuff available on download page is the same as in recovery image.
    All tools are tested and I don't see any reason why you should not be able to install this utility.
    Is some error message shown?

  • Satellite U200-181: How can I check if Trusted Platform Module is present

    How can I check Trusted Platform module is present or not?

    Hi
    The configuration of TPM (trusted platform module) is carried out in the BIOS setup program and this function is provided only with some models.
    I dont know if the U200-181 supports this or not but you can check it yourself.
    The security controller settings should be available in BIOS system Setup on the second site.
    If the unit supports the TPM you should see the switch to enable or disable this security option. Usually as per default the TPM is disabled.

  • I have 1 GB RAM on an '07 MacBook Pro. 1) How do I check remaining memory? 2) I have Microsoft office 2004 - do I need to buy more RAM to upgrade to '11? 3) I need a new battery ... Is it worth the $$ to buy a new battery, RAM and Microsoft office 2011?

    I have a MacBook Pro from '07 with 1 GB of memory. The battery is shot and my AppleCare has run out. I just upgraded the OS to 10.6.8. But a few questions:
    1 - How do I even check how much memory I have left on this computer?
    2 - How do I check how many battery cycles are left?
    3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11 because I can generate pdf's from Word. Roughly how much RAM does Office '11 take up?
    4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
    5 - How much does 1 more GB of memory cost?
    AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
    Or does it make more sense to just get a new computer entirely? (trying to avoid this).
    ANY help would be sooo appreciated! Thanks.

    1 - How do I even check how much memory I have left on this computer?
    If you're asking how to check to see if you need more RAM, open Activity Monitor and go to the System Memory tab, then compare page outs and page ins.  If page outs is 10% or more of page ins, you probably need more RAM.
    2 - How do I check how many battery cycles are left?
    There's no limit on the number of battery cycles, it's just that the more cycles you've used the more "worn out" your battery gets.  You've got a 4-year-old machine, and if it's still got the original battery, it's probably about time for a replacement battery.  You can check battery health using System Profiler...  look at the Power section under Hardware.
    3 - I want to upgrade to Microsoft Office '11 because I don't have Adobe Acrobat to creat pdf's and I need to be able to do this for school... Instead of buying acrobat, I figured I would just upgrade to Office '11
    You don't need Office 2011 to create PDFs.  Any application capable of printing can create PDFs on a Mac.  Just choose File -> Print, but instead of clicking the Print button in the print dialog, click the PDF button and choose Save As PDF in the menu that appears.
    4 - Does Apple still make batteries for this computer (from '07)? How much do they cost?
    5 - How much does 1 more GB of memory cost?
    I'll "ditto" sig's answers to these.
    AND lastly -- is it even worth it to spend the $ on more RAM, a new battery and Office '11?
    Or does it make more sense to just get a new computer entirely? (trying to avoid this).
    If Office 2004 is still working fine for you, stick with that and don't incur the costs of Office 2011.  As to the RAM, only add more if the test I mentioned above indicates that you need it.  If you buy more RAM when you don't really need it, you won't see much (if any) performance improvement.  That just leaves the battery...  and if the machine is still doing what you need it to do and you don't really need a new machine for anything, you could definitely buy a new battery and get a few more years out of it. 

  • How to disable checking for updates for Shockwave plug-in?

    SOS: how can I disable checking for updates (and reporting
    that there is one) for a Shockwave object on a web page?
    I have a client with an older Shockwave version, and it's a
    royal pain for each user to be told there's a newer veriosn and do
    you want to download...
    Any help gratefully received.

    I have zero experience of macs.
    Can't you install Silverlight and the plugin for all users rather than a specific one?
    I would guess/hope/expect there'd then be one plist file for everyone? 
    Please don't forget to upvote posts which you like and mark those which answer your question.
    My latest Technet article - Dynamic XAML

Maybe you are looking for

  • Nokia Lumia 520 saying 'incorrect password' after ...

    I downloaded the 'Mobile accessibility' app yesterday, it required a reboot and i agreed . After that i entered my password as usual but it say ' incorrect password' I kept on trying and it said ''try again in 2 minutes'' and i did. But it said it's

  • Can Labview output source code in text format?

    I am trying to file a patent that includes some Labview code. The patent office recommends attaching code (either source code or machine code) to show reduction to practice. However, it appears that the USPTO only accepts CD-Rs that have ASCII text o

  • IMAC SPECS

    Hello! Had a couple of questions on the Imac. Im looking for a new desktop, but im puzzled that the HP HDX has a higher spec than the Imac (With full spec) Why is that?

  • Arabic Number Display in Oracle

    Hello, i have been using oracle reports for Arabic text but i can not get the output of the Numeric data in Arabic format. it is coming as question mark in report for those number which are saved in arabic format . However, in database it is stored i

  • Icons are inactive - impossible to sync

    When  BB in connected via USB, at the BB Desktop Software, right upper corner appears " CONNECTED", at the bottom does not appear the BB PIN. I have version 5.0.1. All the Icons are inactive so it is impossible to sync. The BB Device manager recogniz