Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

Similar Messages

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

    Hi,
    I have a Satellite Pro C650.
    It boot fine.
    I can see Windows starting up - after startup - the screen goes completely white.
    Has anyone seen this?
    Am geussing it might be a loose display connection - but I the screen displays the startup sequence and initial windows startup.
    Regards,
    eeiddne

    Hi
    I dont think your display is faulty.
    What happens if you access the BIOS at the beginning?
    To access the BIOS press F2 while powering on the unit.
    Access the BIOS and keep it running for some minutes and check if the display will turn to white.
    Additionally its advisable to connect an external monitor and to output the display to the 2nd screen. If the 2nd screen would not be OK, then the graphic chip might be the troublemaker.

  • Satellite P35-S6112 - No sound after Windows 7 installation

    I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
    Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

    I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
    If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
    Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
    Which OS have you used before Win7 installation? Have you noticed the same problem?

  • Satellite P100-429 - No sound after Windows 7 installation

    I have a Satellite P100-429 Purchased Nov 2006.
    I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
    an I download a new driver to solve problem or is it more complicated than that? Than you

    Hello
    For me it sounds like that you didnt install the sound driver for sound card
    According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
    Just search for Satellite P300 drivers and test the sound driver It should work! :)

  • Satellite A200-20H - No sound after Windows 7 installation

    Hey Guys.
    I have just bought this computer from a mate, and I have decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play some sound. There is no sound what so ever on the laptop, all the sliders are at max, I have tried pushing FN+ESC whit no difference. I have tried reinstalling and updating soundcard driver, no luck either.
    I found a "soloution" which said I should install Value Added package, and then run an app, which should unmute the PC, no luck there either..
    So I am starting to run out of ideas?
    So I am hopeing one of you clever guys in here has a soloution.
    If you need any info from the computer, just ask for them and i will reply whit them as soon as possible.
    Big thanks in advance
    Kim Jensen

    Well thx for the soloution, well an attempt to a soloution as the sound is still missing.. I did a total reinstall again.. I installed the Value pack as the article told me, and i ran the sound utillity program.. Still there is no sound..
    I have just tried putting some headphones in the computer, to see if sound would come out of those. That didn work either...
    Any ohter good ideas? =)

  • Satellite Pro 4600 Missing Sound After Installing Windows 98SE

    I have installed Windows 98SE onto my 4600 whose specs are:
    Model PS460A-04163
    P850 14TX 128M 20 DVD ML
    I have no sound at all and all sound options are grayed out. I have downloaded a sound driver from Toshiba (Yamaha AC-XG ?) but maybe it was not the correct one. Can someone point me in the right direction for the correct sound driver. I'm also not sure what "series" this model comes under. Thanks for your help. Sep.

    Thanks for that. I have tried the Canadian site however the model type I have (PS460A) doesn't exist on their search selection drop down for Part Number. Perhaps it is know as a different model in other countries (I'm in Oz)? Maybe it doesn't matter and I can just pick one of the other 4600 models - I'm unclear on this. Can anyone confirm? Thanks again.

  • Satellite Pro A10: No sound after upgrade to Win XP Home SP2

    Hi,
    Just used the recovery discs on my Sat Pro A10, no problem with sound, and then upgraded XP Home to SP2, no sound.
    From what I have read elsewhere, this is a problem, and there doesn't appear to be an answer. I have spent hours searching for updated drivers to no avail.
    I have also contacted Toshiba support, after much huffing, and puffing they pointed me to the following driver, 5.12.01.3542, which is the same as the one I already installed, and does not work.
    Surely there must be something out there that works.
    Ant.

    Install the newest available sound driver fro this sound chip and perform the all the Windows updates available on the Microsoft page!
    Update simply the whole OS!!!
    http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us
    Note; possibly you have to reboot the notebook and have to connect to this site several times to get all the available patches.

  • Satellite Pro 4600 - No sound on Windows XP SP3

    Hi,
    The 2 drivers in the download section dont work. Everest shows me that there is no Windows Audio (service started), and the Intel 82801BAM ICH2-M - AC'97 Audio Controller [B-2] PCI.
    No driver is installed now.
    Any ideas?

    Hi buddy,
    Have you yellow exclamation marks in device manager?
    If yes you should choose the device (I assume the sound card), right click and choose update driver. Then select the driver files from downloaded file (unzipped).
    As Xardas wrote, make sure that Windows Audio service is running:
    Start > Run > Services.msc
    There you can check Windows Audio. It must be started and start type set to automatic.

  • Upgraded my macbook pro to mountain lion. But during windows installation, it refuses coz of FAT file system. Also is it possible to partition after windows installation???

    I just upgraded my macbook pro to mountain lion. Now I want to install windows, but during installation using bootcamp, it says windows can't install on FAT partition. I couldn't change it to NTFS. Also how can I partition my hard disk after windows installation. Coz before windows installation, if I partition hard disk, it won't allow me to install windows saying startup disk can't be partitioned.......help would be appreciated.
    Thanks

    bkchoo wrote:
    Now, I wish to upgrade from Mountain Lion 10.8.5 to latest version of OS X Yosemite, but I am in doubt and worry if after upgraded to Yosemite, can I still using my Windows XP where I installed now in Mountain Lion 10.8.5 BootCamp?
    Yosemite does not allow a new installation of XP, but an existing XP installation is self-contained and will continue to work. Does your XP installation use a FAT partition? You may be better off using NTFS and then upgrading to Yosemite.
    Will the Yosemite upgrade process delete my Windows XP partition or crash my current BootCamp? Can I still have an option to load OS X or Windows XP (press 'alt/option' key during boot up) after upgraded to Yosemite?
    If you have made any re-sizing attempts to WXP partition Yosemite will cause problems, otherwise the Yosemite upgrade leaves XP untouched.
    Are there any specific reasons to upgrade to Yosemite?

  • Graphic Driver on Satellite Pro U200 (Vista Business 32bit CZECH)

    I experience two problems with my gfx driver.
    1) When recovering from Standby, the display goes to 1024x768 instead of going back to 1280x800
    2) When playing Lineage 2, the game crashes to Desktop and I get the error message "Display driver igfx stopped responding and was recovered". After googling a little, i figured out a new display driver for my Intel 945GM Express would resolve the problem. So I downloaded the proper driver from intel.com but I can't install it. I'm getting an error message saying "Installed driver is not verified for this computer. Ask the computer manufacturer for the appropriate driver." So I went to the toshiba website and I've downloaded the appropriate driver from there (well, the one on toshiba.com is not the latest, intel.com has a newer one). But when I tried to install it, I got the message that my computer does not meet the minimum requirements for the installation! What does this mean?! I've read the readme file and my laptop definitely meets the requirements, besides the driver I've downloaded has to be working for the Satellite Pro U200, because I've entered all the needed info for downloading the driver.
    So can someone please solve my problem? And if not, is there a toshiba support hotline or something where i can call?

    1st: Download the latest driver from the iNTEL-Page.
    2nd: !UNINSTALL! the old one, under Add/remove Programs.
    3rd: Reboot.
    4th: Install the new driver.
    5th: Reboot.
    6th: Pray ;)
    Good Luck. The error comes only when you try to install a new driver over another old one (which is from Toshiba). But Toshiba is never up-to-date when it comes to drivers, so better look for wireless, display and chipset always on the intel page!

  • Satellite Pro U200-10I - How to disable check system on start up?

    :x Hi,
    I have Toshiba Satellite Pro U200-10I and I want to disable the check system as it is time-consuming for the machine start up. Is there a way to diable that?
    Nedd your help!!:D

    If you are referring to CheckDisk, just let it run through and it should stop running after that, until the system crashes or the power shuts off while in Windows.
    If it keeps on appearing, test the Hard Disk for errors by using DFT.
    DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
    Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
    If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
    Restart your laptop and boot from the DFT Disc.
    Choose the "Advanced" Test and let it run (it may take an hour or so).
    If you see a red message box, the HDD is faulty.
    An error code 0x70 means there are bad sectors and the HDD needs replacing.

  • Error message "failed to load Tosrfcom" on Satellite Pro U200

    hi
    I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
    after restart, even for the first time, have the following error in Event Log:
    Log Name: System
    Source: Service Control Manager
    Date: 07.07.2007 01:29:15
    Event ID: 7026
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: toshiba
    Description:
    The following boot-start or system-start driver(s) failed to load:
    Tosrfcom
    under:
    http://www.eventid.net/
    cannot find any solution !
    knows someone howto solve this problem ?

    Hi
    After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
    The driver was installed in the registry under this entry:
    HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
    I dont see many solution ways
    Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center.

  • Satellite Pro U200 - Which image viewer is preinstalled on Vista?

    hi
    Which Image Viewer will be preinstalled on Vista Business from Satellite Pro U200 PLUA1E-02802QS4?

    Hi
    Im not Satellite Pro U200 owner but I assume the normal Windows image viewer is installed.
    But I dont understand the reason of your question. You can install and uninstall what you want so doesnt be worry about this! ;)

  • Satellite Pro 6100 shuts down after 15-30 minutes

    My satellite Pro 6100 cuts out after 15-30 mins operating on mains power. There is a snapping sound and all lights go out except slow flashing amber (power problem). I restore it by removing the power cable and waiting a while.
    It will then boot up again. I have used two different power adaptors and two different battery packs. It also happens if running on mains with no battery in. My suspicion is an overheat cut-out. Does the Sat Pro have one? Might it be clogged with dust inside (it is 5 years old)? If so how do I clean it out. I don't think it is fan failure as I can hear the fan cut in. Advice much appreciated. Thank you.

    Hi there,
    Me and my partner, have the same LapTop, and I've located the problem in connector between PSU board and MainBoard. So, if you've never opened your LapTop, now is the time, but be prepared with tools for SMD soldering. Usually, the connector on MainBoard is the problem. The reason for this is that Toshiba made flaw in design of the housing and admitted that, which resulted with court order for replacing the LapTop with some models from newer line for that time, or paying cash amount ($1.000). I intend to repair my LapTop in a way that I will replace the connectors (both on PSU and Main Board) with thin wires. I know that this is a hell of a job (160 solder points) but what can I do, I love this machine. I am working on Compaq EVO N-610c, but he can only eat the dust from Toshiba.
    Regards,
    Alek
    P.S. If you want to consult me about that matter, feel free to contact me on my e-Mail: [email protected]

Maybe you are looking for