Satellite Pro - Win7 - Not Responding Msg

Hi
Pro has 2G memory 40GB storage
I am having endless probelms with the Win7 'Not Responding' message in various applications. Laptop gets slower and refuses to open programs after about 3 hours. Have to reboot, also after some not responding messages I have to reboot.
Sometimes with the not responding problem in Outlook Express it deletes the emails. Not nice.
Everywhere on the web people are having similiar problems. Purchased Pro new and ok for a few months and then the prblems started.
Have Toshiba go an anser to it ?
Thanks
Charlie

Hello Charlie
Can you please tell us which Satellite Pro notebook do you have.
As you can see on the top of the page this forum is user-to-user forum so here you can discuss with other people who own Toshiba notebooks and want to share own experiences and opinions. Here you will not find some official statement.
Back to your issue: you are right, many people have similar problem and many other different problems, especially issues when notebook is slow. My opinion is that in most cases people have not powerful enough notebooks, they dont have optimized operating system, and in general there are many different things that make notebook slow.
I dont know how do you use your notebook, do you still use original OS that you got with your notebook and which settings do you use and it is not easy to say what is wrong there. Your notebook with 2GB RAM is not the fastest one so I would like to know have you tried to optimize os.
Have you disabled some applications in start-up?
Which antivirus application do you use?
Are windows updates set to Automatic?
Many background activities can slow down your notebook or be responsible for some conflicts.

Similar Messages

  • My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

    I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

    Mylenium
    Thank you for the suggestions.
    I checked the WIndows log files. It reported the following error:
    The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 4770
    Start Time: 01d0079a09bba381
    Termination Time: 13
    Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
    Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
    I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
    Thank you.

  • MacBook pro will not respond to mouse clicks

    My MacBook pro will not respond to click of the mouse but the cursor does move.

    Hi,
    Try installing the trackpad update from apple.
    Here is the link.
    http://support.apple.com/kb/DL724

  • Why does my final cut pro is not responding every time I open it????!!!!!!

    why does my final cut pro is not responding every time I open it?

    As you give no background info nobody can possibly guess.
    However, have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Premiere Pro is not responding

    Primire Pro is not responding to video which is there in the timeline.When i scrub slider video cant be able to play?
    [Please choose a short description for the thread title and only post the actual issue in the main body.]
    Message was edited by: Jim Simon

    Hey Ann,I am using premiere pro cc in win 7 and project setting is..i am sendin u the screen shot

  • Recently my track pad (in my Mac Book Pro) does not respond to 'clicking' commands.

    Recently my track pad (in my Mac Book Pro) does not respond to 'clicking' commands.  It does just fine with a USB cable mouse.  What do I do?

    Are you tapping to click or physically clicking? If you're clicking, does the trackpad button go down all the way?

  • I get a (Not Responding) msg when I open iTunes

    I get a (Not Responding) msg when I open iTunes.  Should I re=instal iTunes and if so, how, without loosing all my songs.   Do I need to uninstal first??  Thankyou in anticipation..

    Go to http://www.apple.com/itunes/download and download the latest copy of iTunes from there.

  • Acrobat PRO XI  not responding when using Send File

    We have 3 new Windows 7 Pro 64 bit workstations with latest service packs, Office 2013 latest service packs and Adobe Acrobat XI  ver 11.0.4.
    I have assigned the AD group Domain Users to the local pc Administrators group.
    when trying to use the send file as an email attachment, the email is sent with the attachment but Acrobat goes to "not responding" state
    When I login as me Domain Admin, works fine.  When I login to my pc as one of these users works fine.
    What am i missing?

    I have the same issue, everything I do seems to only fix it temporarily. I can't believe we pay over $100 for a piece of software and the only support option is their forums, I can't call or even chat with a support rep, that is insane.
    I have clients that this same issue is happening to and telling them it's fixed every other day only to have it break again and have no where to look for answers is extremely frustrating. Please help us out.

  • My adobe acrobat 9 pro is not responding

    I have had Adobe Acrobat 9 Pro installed for 3 years now.  Then I got a message that I had to uninstall and reinstall which I did.  However, Adobe is not responding when I try to move around a PDF or try to print a page.  Any ideas?  Does my purchase of Adobe Acrobat 9 Pro expire?  @

    Hi Eric Hillmann,
    May i know which operating system you are using?
    Have you tried to repair the Acrobat? What exactly you are trying to do when Acrobat is not responding?
    Regards,
    Ajlan Huda.

  • Why does Satellite Pro A300 not start when the power button is pressed?

    Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
    In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
    Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
    What shall I do to get a normal start procedure?

    When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
    When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
    The same happen on my Satellite A300.

  • Premiere Pro CS6 not responding after adding anything to timeline

    I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything.  I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding.  It's frustrating because the program used to work fine before.
    The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks.  I have a late 2008 MacBook Pro.
    Thanks in advance for the help.

    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
    I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

  • Premiere Pro CS5 Not Responding (Freezing) When Working With Other Programs

    Hello,
    I have a performance issue with Premiere Pro 5.0.3 version. When I have the program open and bounce to another program or Windows Explorer window lets say to drag in an asset such as a music or video file and then when I make the Premiere window active the program does not respond for a good 15 seconds, then after some processing (you see the mouse icon change and hear the hard drive chugging), I am able to again work. This is happening every time I switch windows to work on something else. Even if I just click away to another window and click right back without doing anything else, it does this non responding action. It even says it in the title bar (Not responding). I am wasting so much time waiting for the program to respond.
    My system :
    Windows 7 Ultimate
    Intel Core i7 CPU 860 @ 2.80 GHz
    8.00 GB of RAM
    Quadra 5800 Nvidia graphics card
    Drobo Pro 24 TB drive (where my project files, music & video files live) connected via iSCUSI
    Sonnet 4 TB raid drive (scratch disc) connect via ESATA
    Dual Monitors
    Please help!
    ~ Doug

    Doug,
    Similar had plagued earlier releases of CS5, but I thought that it had been addressed with the CS5.0.3 update. Maybe I am wrong.
    There were several other threads here, with similar problems. Maybe they contain some tips that will help. The "constant" seemed to be shifting focus from PrPro, and then back to PrPro.
    Good luck,
    Hunt

  • Macbook pro will not respond to command r

    Macbook pro will not boot up or respond to command r

    If the machine is older than October 2011, you will need a firmware to enable the command-R boot.   Try booting with the Option key to see if anything is visible.
    If not, and you aren't backed up, see this tip:
    https://discussions.apple.com/docs/DOC-1689
    If you are backed up, but the machine won't turn on, try resetting the SMC:
    http://support.apple.com/kb/ht3964
    If it won't turn on, but is under 4 years old, try resetting the PRAM:
    http://support.apple.com/kb/ht1379
    If the Mac has a removable battery (exposed to the outside), try connecting the computer to a known working outlet (testing with another electronic device), and remove the battery before resetting the SMC or PRAM if they didn't work at first.

  • MacBook Pro 15" not responding after boot-up?

    My MacBook Pro 15” has an issue and won’t work! Yesterday I went to my MB to load it up for my daily commute into the city. As I was loading my bag I tried to disconnect my ext. backup drive that works via Time Machine.
    When I left it the night before for its nightly back-up everything was five by five. However in the morning I couldn’t disconnect the device nor did my trackpad work (no mouse cursor). I was forced to perform a cold shut-down.
    When I returned home last night I initiated a power up on my MacBook Pro. Everything booted up fine however I didn’t have control of the trackpad. My keyboard didn’t work either. I shut it down and repeated the process a few more times. Each time after the boot-up I had the same problem. I can see the mouse cursor, but have no control and the keyboard will not respond to any key being depressed.
    Does anyone know what is wrong my MacBook Pro, beside user error or the “Nut behind the wheel?”
    Any help or suggestion would be appreciated.
    Cheers~
    Message was edited by: Fish Eye

    Michael Flynn wrote:
    Did you try booting up using the system disk? By rebooting into the system disc, will test whether the keyboard problem is localized to the installed version of OSX or a larger problem.
    Here is a little follow up. I went home and tried the system disk. No luck, now I have a system disk in my machine that I cannot remove because the eject button doesn't work.
    I took my MBP to the Genius Bar as scheduled. The “Genius” did the normal reboot and head scratch test. However when he plugged in an external mouse and keyboard, voila Bob’s your Uncle and it worked. Hi expert firm determination had concluded that the trackpad and keyboard were no functioning on my MBP…
    The trackpad and keyboard are connected to the motherboard via a ribbon cable that had been fried at the connection. They will be keeping “left brain” for the next few days to RR the trackpad and keyboard.
    The good news is that I have the service plan that will cover all expenses and parts. It was worth it to spend the few extra monies upfront, because I could only imagine what this would cost without it.
    The other good news is that they will not send my MBP to the Tennessee repair depot, it will stay at the store to be worked on.

  • Premiere Pro CS3 Not Responding on new System

    Can someone please help me out here?!?!? I just bought a brand new laptop. It haves an i7 processor, 8gb of ram, 1 tb of hard drive space, as well as runs on 64 bit with Windows vista 8.1 I believe. As we all may know Adobe Premiere Pro CS3 runs as a 32 bit program. Every time I try and open up a project I have already been working on prior to my new system and try to locate where the specific files are for it to link/synchronize, the Adobe Premiere Pro CS3 program freezes up and "Not Responding" appears causing me to press "ctrl, alt, and delete" to end the program using the task manager every time. Shouldn't I be able to run a 32 bit program on a 64 bit system? What can I do? Please help me!!! Thank you in advance!!!
    [Text formatting corrected.]
    Message was edited by: Jim Simon

    2 things to try
    Right click the program icon and, if available, select running in WinXP mode from the pop-up option window
    Right click the program icon and, if available, select run as administrator from the pop-up option window
    >Windows vista 8.1 I believe
    As far as I know, that does not exist... current is Windows 8.1 (Vista is OLD and discontinuted)

Maybe you are looking for

  • Pages 5 Document Endnotes doesn't allow text continuation onto next page?

    For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is

  • Eventing on the ADOBE form controls.

    Hello Experts, I have a requirement where I need to populate some fields of my ADOBE form based on a value selected from the dropdown in the same form. Lets say I have a dropdown DD1 on my form and I have other 3 input fields namely Input1, 2 and 3.

  • Connect I Phone to computer

    When I Phone is connected to the computer, can you get internet connection on the computer to send/receive images?

  • Pull the data from legacy System into report and display with SAP data

    Hi Friends, My requirement is- Create report by processing data from SAP tables and prepare output.And Before displaying the output, I have to pull the data from non-sap system which is readymade (It will come as flat file with similar fields as Repo

  • Trivial Catch block question

    In a test harness I wanted to put some debugging output to System.out and keep one line per thread execution so I could read it more easily. I have a try catch block, and in both sections my debugging prints out with System.out.print, so they should