Satellite R - BIOS update error message

Hello,
I tried to update my BIOS, because I have the version 1.70 and the loudness off the fan decreases with 1.80-2.10. The problem is, I get an error: You have not given permission to execute the update. I started the program with the administrator-user so I do not know why this doesn't work. I know somebody else had that problem before, but they haven't searched for a solution.
I hope you can help me,
hblockx

Have you tried logging into Windows using Administrator?
Also try reinstalling the Toshiba Value Added Package.

Similar Messages

Satellite A660 - BIOS update error message

Just tried to update BIOS and get the following error message:
Installing UEFI winflash 0.02
The programme will be closed
There is an error occured, please check below items
Bios version above 200
Battery capacity more than 20%
AC is attached
Anybody got any ideas?

The exact same thing keeps happening to me...
As for the reason I am downloading it: the Toshiba service station is telling me "BIOS version 2.00 for the Satellite A660/A665 is available as a recommended update" So i go ahead and download it. BUUUT, during the install process it opens the Winflash utility and on the second step (right after 'load new bios') it crashes all the time 100% of the time and quits itself always on that same step no matter how I try the install... Also, YES I am sure it is the right BIOS version for my computer, YES I am running it as admin, and NO I do not speak techno fun talk.
I've tried using a separate Toshiba BIOS launcher: what I believe the original poster used, as I got the same message *except* the message i got was: "There is an error occurred (and it spelled that wrong BTW........ but I digress), please check below items. BIOS version above 190, AC connected."
I've tried rebooting fresh and going into the folder it downloaded into and same thing happens, and I've tried re-downloading it from Toshiba's website directly; also did the same thing and didn't work.
Currently I think my computer is on BIOS 1.9 or something like that, and the one attempting to be installed is 2.0. The computer does NOT have any password on any boot-up screen either.
I hope to get this resolved, especially since the laptop is fairly new and whether the update is needed or not, it should not be malfunctioning this way. I'm reluctant to call a technical service "hotline" as I rarely have good experiences with them.
Please help!
someone
Message was edited by: Jonnybeem

Satellite A660 BIOS update error

Have been trying to run the update advised by Toshiba but encounter the following error:
"There is an error occured, please check below items.
BIOS version above 2.20
Battery capacity more than 20%
A/C is attached
Confirmed BIOS: TOSHIBA 1.80 09/14/10 listed on system along with SMBIOS: 2.6
Any ideas on what to do?????

Hi
As far as I know this error appears if you use a wrong BIOS version.
What Satellite A660-xxx do you have?
The Toshiba European driver page provides a BIOS v2.10 but only for Satellite A660 *PSAW9E* series.
Please check this!!

After last automatic update, error message XUL Runner error platform version '6.0.2' is not compatible with minVersion 6.0.1. maxVersion 6.0.1. I am unable to open Mozilla Firefox at all. Had to use Explorer to ask this question!

After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.

See:
*[[/questions/869812]]
*[[/questions/869951]]

Please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com

Elements 10 update error message

elements 10 update error message that says the update server is not responding?

RKV
Thanks for the reply. The deletion of the BadDrivers.txt file is your best opportunity for a resolution. So, let us pursue that.
If you have Premiere Elements 10 on Windows 7 64 bit, the BadDrivers.txt file is there. But....in your attachments, you show
Program Files
Program Files (x86)
and no signs of Program Data where you must start in the path to the BadDrivers.txt file.
a. Could you be using Windows 7 32 bit?
or
b. Are you working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
In Windows 7 64 bit,
Click on Start
In the Search field that appears above Start, type in Folder Options.
Folder Options text will appear at the top of that left column for you to click on.
Clicking on Folder Options will bring up its dialog.
Click on the View Tab of the Folder Options dialog.
Then scroll down the list of options under View until you reach Show Hidden Files, Folders, and Drives,
and make sure that it is selected.
Program Data should appear in the lineup which includes Program Files and Program Files (x86).
Please let us know the outcome.
Thank you.
ATR

PS 6 is not updating: error message U44M1P7 Also have CC installed.

When I click on "more details" my finder opens like I'm supposed to choose a file and it's all gibberish to me.
Anyone encounter this and have a solution?

PS 6 is not updating: error message U44M1P7 Also have CC installed.
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

After downloading Yosemite iPhoto is blocked. Update error message reads: Update not available for this ID either because it was bought by a different user...

After downloading Yosemite iPhoto is blocked. Directed to update. Update error message: Update not available for this ID either because it was bought by a different user..... This could be because my iPhone is now linked to the Mac and it is recognising that ID.

My previous post should read...Could this be because my iPhone is now linked to the Mac and is recognising that ID?

HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

MSI H67MS-E23 (B3) BIOS update error

Tried update bios on this mainboard but mistaked and download wrong bios .exe updater (E7680vC3 for h61). EXE file started and proceeded with no error messages. After rebooting pc i get black screen with letters B4 or A2 in bottom right corner. Can someone help me?

Duplicate Thread.
https://forum-en.msi.com/index.php?topic=177253.0
Topic locked

Bios Post error message K9N sli AMD 64x2

I have just built as per my profile below.
After POST, and before entering the Windows load, I get this error message.
"Not enough space in Runtime area!!. SMBIOS data will not be available."
I had great difficulty loading drivers from the CD supplied with the board, as the menu did not display the full list of options. I assume this is because the SMBIOS data did not properly indicate board, procesor and operating system detail?
Any help would be greatly appreciated.

All is fixed..
Thank you all for your kind help and interest in the problems of a complete stranger. It just shows how wonderful these forums are. Thank you.
I flashed the BIOS to rev 1.3. this updated and cleared NVram etc.
Flashing was a nightmare.
I had to create a win 98 boot disk, but It would not recognise NTFS drives. Noting the warning not to flash from floppies, I then burnt a CD with the new BIOS, and addressed the CD from a boot floppy with win98 cd drivers.

Satellite T2450-CT: strange error message

I get this error message on my Toshiba T2450-CT.
This BASIC was aborted because this machine has no ROM Basic use Toshiba's Basic.
Due to this I have tried to update the BIOS as per the website instructions, but all I get is a beep when I get to the stage when I insert the floppy disk and press any key!
Can anyone help please.
Pete

Hi
this is a funny one! It reminds me of the oooold days. Somehwere in the history there was a part of the BIOS or another ROM on the motherboard that held BASIC (the programming language). If the PC somehow did not boot from any disk then it automatically started BASIC.
I think (not 100% sure here) that Toshiba never implemeted the BASIC-part.
Your problem comes probably from the fact that the primary DOS partition is not set ACTIVE. Boot up on a bootable DOS diskette and start FDISK to check that it is set to active.
Take care though!! If you make mistakes here you might destroy your data.
Good luck
Tom

Ideapad-100 bios update error

I'm using windows 10 pro and trying to update the bios to 2.00, I get the following error message though. "current platform NOT supports GPT." I have no idea what this error message means, can anyone tell me how to fix it?

Hi
Welcome to the forum!!!
I am not sure of the problem but i don't advice you to use errorend or other programs since it will cost you 30$ and there is no assurance if it will work.
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Satellite A100 bios update does not work correctly

Hi,
I have a Satellite A100-153 PSAA9E and using Vista OS.
How do I install the new bios?? I run the .exe and nothing happens it shows that it extracts some files and then a notepad text appears that says something like this.
' INVENEC Pre-Flash Script for SanAntonio10
' 09/26/2006 Version 1.0.0.3
On Error Resume Next
'=== Declare Variables & Objects
Dim WshObj, objArgs
Dim WMIObj, chipset
Dim InfoStr, WorkPath
Dim VideoType
Dim fso, oFile etc....
and then an error appears that says if the SanAntonion10 BIOS590MP.exe is installed correct.
pls help

Hm, sounds a little bit weird. I would suggest you to do the following:
go to the drivers download page
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Download the latest common modules if available and RE-download the BIOS update.
Then try it again. If this doesnt help then perform a full system recovery, download the BIOS update and then it MUST work.
Greets

BIOS UPDATE ERROR of HP G6010EG

Hello,
i have a problem updating my old BIOS Version F.1F to F.03, F.07 or newest F.08 (those are the only available bios versions for my Modelnumber on HP
I always get the error: "This Bios Version is not for your PC / Notebook" if i want to run the update directyl after Installation.
Alternative:
Even if I copy the *.WPA (extracted from the downloaded bios-update *.exe installer ) file into the extracted folder of WinFlash64 directory (My Vista is 64-bit), and rename it to "BIOS.WPH" and run the flash util as administrator, i get the following error messages:
First Error:
Part ID of System Bios and new Image File are different (system = AT8, file = AT1).
The System Platfrom may be different from the Image file. Are you sure you want to proceed?
I click "Yes" and then the Pc freezes with the Error message:
BIOS update failed! Failed to flash Bios image: Enable Chipset/Platform/FlashDevice failed!
Incorrect funtion. Error code 1
See the Help for troubleshooting.
HP G6000
Product: HP G6010EG
p/n gh830ea#abd
Windows Vista 64bit
I googled a lot and also read in the forum. I'm quite familiar with computer and never had such issues with a Bios update.
Hope for help!
Greetings
BTW this is the current BIOS-Info that Windows shows up:

Ok i stop forcing it and wait for help....
Your Idea of an error in what has been posted could also explain why i could not get the HP G6010EG Wireless-Lan to work with the drivers on the HP Driver Page:
Atheros Wireless LAN-Treiber 2009-03-04 , Version3.00 A, 18.94M
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=de&cc=de&dlc=de&sw_lang=&product=3545...
I used a driver software (freeware) with an external WLan-Card to automatically install the proper internal Wireless Lan Driver so that the Wireless-Lan of the HP G6010EG is working now...
Saidly this software does not automatically detect a proper BIOS... ;-) :-(

Satellite R - BIOS update error message

Similar Messages

Maybe you are looking for