Satellite R630 - need internal camera video capture software

Help!!
I have a Toshiba Satellite R630 laptop with skype installed.
The video side of skype works perfectly well but i can't seem to find any software on my laptop that enables me outside of skype to make and capture video recordings using the built in camcorder in the laptop.
What do I need to do to be able to do this?
Thanks. Len

Hi
As far as I know you should find the software in All Programs -> Toshiba
If its not installed, you can download this from the Toshiba European driver page.
After the installation, the webcam tool control bar should be available in the upper are of the display. Its slides in and out in order to use it
The webcam tool control bar can be moved to different areas (left right bottom upper area)
Check this

Similar Messages

Webcam/ Video Capture Software

I keep hearing that some logitech webcams work with Macs even though it says it doesn't. Does anyone know it Logitech QuickCam Messenger WebCam works with a mac, or if anyone can suggest a similar webcam that does?
I also wanted to know if anyone knows a video capture software for macs? I want to be able to record tutorials off my screen.

I assume your WebCam is a USB Camera.
If so, you will need at least LabVIEW and the Vision Acquisition Software for 2009 to natively aquire images from your webcam - which has to have a DirectShow Interface.
The first version where this was possible was LV8.6 and the Vision Acquisition Software 8.6 with an additional IMAQ USB library
Christian

Ipod video capture software

Hello out there....
I recently purchased an ipod with video capability, so now I am trying to convery VHS movies for play on an ipod. The problem is that I am running windows xp as an os, therefore most of the video capture software is set to capture in an avi format. So I have to capture in avi, convert to mov and finally use itunes to convert for the ipod. the bottom line is that I have to spend 2 hours at each step, and I wast to do it on the fly, so the whole process takes two hours, not six hours.
I found artech356.com, and they can capture in mov, but the file still has to be converted. Any suggestions? I went to the apple store locally, and they don't have any software either, so I am not inclined to buy an apple at this time.
Thanks,
Andrew
not apple Windows 2000 works

Yes, it is interesting that I am still using windows, but they had the market share, and the hardware/software combo was less expensive and easier to obtain and maintain at the time. I checked out apple, and the only software they have to do what I want to do is a high dollar professional version, so it would take about $3000 to switch over.
It is like this, IBM is the mathematical and logical side of the brain, apple is the creative side. To function properly, we need both. I just more naturally gravitated towards the mathematical side because of my personality type. Now that I have seen the creative side, I wish to explore in greater depth, and the appropriate software that lets me do both is not apparently available yet.
The last time I actually used or touched an apple computer it was the one they first came out with in the late 70's or the early 80's. I did recently visit an apple store, and they seem to have improved since then. Do you think they will catch on? I do now that Jobs is back at the helm.
regards,
Andrew

How do I uninstall debut video capture software from my macbook pro?

How do I uninstall Debut video capture software from my macbook pro?

Thanks Sig - not sure that the program came with an uninstall feature (seemed to just go straight into the apps folder but I'll give it a try.

Recommendations for Video Capture Software?

Hi,
I'm looking for screen/video capture software to record what's on my macbook screen in video format. I've been looking at Camtasia, but wanted to know if there are any other alternatives I should consider as well?
I need something that will record what I do on my macbook screen, as well as let's me annotate and edit what's been recorded. Any recommendations?
Thanks!

This is a bit strange with apple servers today. For some strange reason, there seems to be a 5-10 min. delay in my post on this one thread only ....very weird.
Oh well, I'll post the info again in hope that it sticks ....
You can capture to iMovie which is what I suggest or directly to iDVD6 (via 1 step or magic iDVD). Your choice.

Is there video capture software which will capture only the canvas and not my cursor or the way I move the canvas?

Hi,
Does anybody know of a video capture software which only captures the canvas and not my cursor or the way I move the canvas?
I want to simulate a painting being created brush stroke by brush stroke. It would also be good if I could select the layer that it is meant to be recording.
I guess this would have to be a plugin of some sort.
If not - do you have any good suggestions of the best workflow of creating this from Photoshop to After Effects (I don't want to use revealing paths etc...)
Thanks for any help,
Luke

It would also be good if I could select the layer that it is meant to be recording.
That won't work. Screen cap tools by their nature always capture the display buffer of the whole active window. At best, they respect GDI "drawing layers" and regions like Camtasia does, meaning they differntiate between mouse cursors, window frames and the actual content to get more efficient compression. For the rest - see the previous answer.
Mylenium

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

Drivers order for Satellite R630 needed

Hi
I have a Toshiba Satellite R630 and i had some problems installing the drivers. So I would like to know the istallation order of the drivers and if I have too istall all drivers or only the Windows 7 drivers(for example for the common Module only exist a Windows XP version)
All help is much appreciated
Thanks

try to install the system and drivers in following order:
*Win 7 32bit*
USB3.0 Driver 1.0.20.1
USB-Serial Driver 1.00.000
TOSHIBA Assist 4.00.00
TOSHIBA Security Assist 2.0.8
TOSHIBA Bulletin Board 1.6.08.0
TOSHIBA ReelTime 1.6.06.0
Infineon TPM Software Professional Package v3.60.2071.00
Intel Chipset SW Installation Utility 9.1.1.1024
Intel Management Engine Interface 6.00.40.1215
Intel AMT Software 6.00.40.1215
Intel Display Driver 8.15.10.2125
Intel Rapid Storage Technology Driver 9.6.1.1001
Realtek Audio Driver 6.0.1.6083
Intel LAN Driver 14.8.3.6
Synaptics Touch Pad Driver 15.0.12
TOSHIBA Value Added Package 1.3.12_64
Ricoh Card Reader 2.08.03.04
Intel Wireless LAN Driver 13.2.1.1.0.s64
or
Atheros Wireless LAN Driver 8.0.0.258.0.s3264
or
Realtek Wireless LAN Driver 2.00.0013
or
Broadcom Wireless LAN Driver V5.60.48.35
ConfigFree 8.0.30
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
TOSHIBA Fingerprint Utility 1.0.2.27
TOSHIBA Web Camera Application V1.1.2.13
TOSHIBA Face Recognition 3.1.3
Bluetooth Stack for Windows by Toshiba v7.10.14
TOSHIBA eco Utility 1.2.12.64
TOSHIBA HDD_SSD Alert 3.1.64.6
TOSHIBA HDD Protection 2.2.0.4
TOSHIBA Service Station 2.1.40
TOSHIBA PC Health Monitor 1.6.2.64
TOSHIBA Sleep Utility 1.4.1.3
TOSHIBA Disc Creator 2.1.0.2 for x64
TOSHIBA Media Controller 1.0.80.7
TOSHIBA Media Controller Plug-in 1.0.5.10

Camera video capture

Hi I am using a Basler GigE camera with Labview 2010. I am trying to capture a video. I can change the frame capture rate in NI MAX. In my attached program, I collect a specified number of frames and save them as an AVI. However, the timer tells me it takes longer than it should. So for example if I collect 200 frames at 10 frames per second, it should take 20 seconds to collect video, correct? It takes my program longer. Does anyone know why? Also, because of the time discrepancy, I do not know if the program is collecting the correct frames? Thank you!!
Attachments:
20120410 Video Capture.vi ‏67 KB

This issue has been discussed several times, see e.g. here. You can also start a search on how to grab images from a camera and write them to disk (in your case: avi). Good link for this is NI's Vision Forum.
Basically, you shouldn't use one loop for continous data acquisition and writing to the disk. Setup two loops (1 for IMAQ, 1 for AVI). This should solve your issue.
Depending on the compression filter you use you might still observe, that writing the the AVI will take longer than the IMAQ procedure.
Hope this helps.

Video capturing software and editing?

Hi everyone....My first post.
I have an iTouch (i love it....my first ever apple thingy)
I am interested in podcasts for my website and for publishing on itunes and of course, synching with my itouch..
I know how to do all this and here is my question:
I use FRAPS for capturing screen video of gameplay when playing certain games, but I am not sure whether this is the best program for doing this as the quality that comes out on the itouch isnt as good as I expected.
So, to summarise...
1. Whats the best capturing software to use for my PC?
2. Whats the best software to use for editinig my video?
I am using windows XP pro SP2.
Thanks in advance for your help

Since you're looking for Windows software you should probalby post your question on a Windows forum such as, as this forum focuses on compatbility issues between Macs and Windows.
http://forums.windowsforum.org/
http://forums.windowsitpro.com/

DVD Video Capture Software

Hello,
I have a newbie video question. We have a customer that needs to have an old video edited slightly for upload to the web. I own Premiere Pro CS4, but need to get the video from the original DVD, which contains and Audio_TS and Video_TS folder with associated files contained therein.
In the past, I've had to borrow a piece of hardware that ran from a traditional DVD player to my computer to capture the DVD video, which then would be able to import it into Premiere for editing.
Does anyone know if there is a software that would allow me to avoid the hardware interface between the DVD player to my computer? It would be so much easier to be able to put the DVD in my Mac, and somehow capture the video, so I could then be able to edit in Premiere.
This may not be impossible I don't know, but we don't do much video, and hate to borrow the hardware again or sub it out.
Thanks for any help.
Corey

Just a quick follow up to those who read this thread. On my Intel iMac, I ended up using the free MPEG Streamclip for Mac (http://www.squared5.com) to convert the VOB files on the original DVD, and then converted them to quicktime format for editing.
The file renaming mentioned above didn't work for me. I ended up with multiple errors.
The MPEG Streamclip software demultiplexed as Angelo suggested above. While it worked perfectly for me and was free, I did have to purchase the QuickTime 6 MPEG-2 Playback Component for Mac OS X (http://store.apple.com/us/product/D2187Z/A?mco=MTIxODk3Mw) for $19.99.
Before purchasing this component from Apple, Streamclip seemed to import the VOB files off the DVD, but nothing was visible and did not work properly. As a point of note, I'm running QuickTime v. 7.5.5.
Once the QT MPEG-2 component was purchased, downloaded and installed from Apple, Streamclip captured the entire DVD, audio and video, demultiplexed and exported in the format I chose. (QuickTime)
It was then easy to import the QuickTime file into Premeire and the editing began. No hardware bridge was needed to capture the DVD, and it seemed reasonably intuitive.
Though keep in mind, you will likely need to cough up the $20 dollars to Apple for the MPEG-2 component. Before purchasing that component, I couldn't get Streamclip to capture any of my DVDs'.
Hope the follow up helps someone...

Not sure if this is the right place, but what video capture software....

do you recommend? I need something that's cost efficient. I see that there is Mac Capture and Screen Record software that is available and both are under $30. Do any of you have experience with either one of these? Or are there any other that you guys recommend? I want to record the audio and video of the video files that I play on my Powerbook. Thanks.

To me cost efficient is what works the best.
SnapZPro from ambrosiasw.com

-- Video Capture Software suggestions (VIVO) ?!

Hello,
I recently have purchased an MSI 6600GT VIVO video card. I immediatly hooked it up with video and audio in and out. I installed the software included with it (MSI media center Deluxe 2) and was a little disapointed. I want something that you can program to start recording at certain times and that does not have any of the other stuff this software has (picture viewing, radio, etc.). I have a digital cable box that can be programmed to turn on and change channels so I dont really need software with guides and progamming other then on and off. Any advice from people with experiences with these programs would be much appreciated!..
Also, im a little unfamiliar with encodeing of captured video. I think it captures in mpeg-2 and I was wondering if there such a thing as software encoding while capturing (DivX, Mpeg-4, Avi). If not, then it would be nice if anyone had any suggestions of software that encodes after capturing. I think I could find somthing that would do this pretty easily but its always nice to use software that other people recommend.
Thanks in advanced for any help...
PS. any software that is retail or free is awesome

hell-o the software included with the vga does a nice work (and better when you have on chip video processor) but, if you want to compres in another format or even record and compress at the same time you can use virtual dub, from www.vitualdub.org, or/and download the ACE mega codec pack pro form anywhere, the firs let you capture video form any device, like your card in uncompresed format, this method its "stressless" for the procesor memory hard disk cache and video processor but... its too large only few mins. can weight around a gb and more, but instead you have a choice, mselect some codec to compress a the same time, you can manage the quality/space that needed for the file, and works with divx and xvid mpeg 4 mpeg 2 codecs. about programming timming for capture. i don't know any program but i think power dvd creator or power director can manage that, anyway you can capture with any program (msi media deluxe 2 or later do well even in "better" quality) and then recompres or change format wih virtual dub, oooh.... almost forgot... virtual dub can also aply filters like deinterlace (help to eliminate the interlaced tv capturing) and many others
tell me how it work!!! good luck, bye!!!!!

After updating camera video capture mode stop working

Dear sir/madam
Recently I updated My Sony xperia Z1 with android 4.3 version. I get problem of Camera's feature of video recording. When I start recording it has stopped after some seconds and message displaces "unknown error". And stored as a crushed file. When I try to play this crushed video messages displaces "cannot play video".
Please give me suggestion
What should I do to resolve this error?
Viral Dave

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you to run your phone in safe mode for a while to check if you still experience this. If not this may be caused by any downloaded application.
How to boot into safe mode?
If you don't notice any difference during safe mode I suggest that you try to reinstall the phone software using Update Service..
Before reinstalling your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
Please note that before restoring any backup test the concerned feature so its working properly.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Video capture software

Hello.
I need to create a video recorded from my "screen" itself. I'll use that video to create a tutorial for other people who doesn't know how to use it.
Is there any software (freeware if possible) which allows me to record a video from screen-caputure? What about Adobe CS4 master suite? Is it possible that it doesn't include any software to do it?

Google, google, google. Also try versiontracker.com

Satellite R630 - need internal camera video capture software

Similar Messages

Maybe you are looking for