Satellite S3000: how to change a component on the motherboard?

How do you open the case of this laptop/notebook?
I need to change a component on the motherboard.
I get to the stage where all the screws on the base are off, and it seems like all that remains for access into the casing for the 'system board' motherboard is that MAYBE the strip on the front, just below the screen, should be removed.
Is this so? What do I need to do at this stage?
It's urgent that I get to do this in the next few hours.

I dont know what components you want to change on the motherboard but I dont think that its a good idea. :O
However, I dont think that you will find any officials manual how to do anything on this unit. I think only the service partner can receive such documents.
I have found in the net this site:
http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm
It describes how to open and remove all parts from the Satellite 1200. I know its not a Sat 3000 but you can detect roughly how to do it.
But you know if you have not experience you shouldnt do or remove anything ;)

Similar Messages

How to change material component for a Purchase Order?

How to change material component for a Purchase Order?
I need FM .
PLEASE help

Dear ,
Create PO with item category L....There in Item detail you will get tab for material.
There click in component Button, it will take you to the component screen there you can assign and deassign components.
Hope this helps.
Regards
Utsav

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

Satellite C660 - How to change from 32 bit to 64 bit operating system?

Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

How to change row background when the value was changed?

hello expers!!
i need your help...plz help me.
i want my table row(specific) background changes when the user changed the value in a cell. I am able to know that a value in a cell was changed but the problem is i dont know how to change row color background. I've researched over the internet on how to solve this problem but nothing was found.
please see the link to help you visualize what i mean. tnx!
[http://www.flickr.com/photos/28686474@N04/2708299927/]
tnx in advance!! code snippet will be a great help...
Edited by: kagaw3000 on Jul 27, 2008 8:22 PM

final JTable table = new JTable(data, columnNames) {
int lastRowChanged = -1;
@Override
public void tableChanged(TableModelEvent e) {
     super.tableChanged(e);
     lastRowChanged = e.getFirstRow();
     repaint();
@Override
public Component prepareRenderer(TableCellRenderer renderer,
               int rowIndex, int vColIndex) {
Component c = super.prepareRenderer(renderer, rowIndex, vColIndex);
     if (rowIndex == lastRowChanged) {
          c.setBackground(Color.RED);
     } else {
          c.setBackground(getBackground());
     return c;
...........this code will changed background color when data was changed BUT if i changed another data in another row the previous backgound color(RED) will be erase. To make it more clearer, it will only change background color of a row only to one row NOT to multiple rows(that is being edited).

How to change apple account in the ipad many times?(can't sign out)

How to change accounts!
I have multiple accounts not me but the whole family has apple accounts since we all are apples. Anyway everyone has a no credit card account except my dad. His account is synced in my sisters iPad. My dad changed the password so that we don't buy stuff the problem is we can't sign out of our dads account! I mean when we go to ipad:setting->store we already see that its already signed in my sisters account! But the problem is whenever my sister wants to update or download a free app it gives my dads email & wants us to fill the password! We already signed out!
We tried logging in via itunes store then syncing the ipad but nothing happened!
The apple retail store said after you submit the email of your ipad the only solution is to format it. But here is the big problem lets say we formatted it & after few days/months etc we wanted to buy an app we couldn't change the account to our dads account! Since we already are having trouble logging out of our dads account.
So please tell me how to change the account many times! Because I couldn't change it in the iPad nor in iTunes in my iMAC.

The apple retail store said after you submit the email of your ipad the only solution is to format it
Your iPad does not have an email address.
You will need to add a CC card to verify your account. The CC info can then be removed and the account used normally.
It would likely be easier to simply update the apps on the computer then sync the iPad.
iTunes can be authorized for all accounts then all apps can be updated at once.

How to center a component on the page????

Hi all
i want to center a component on the page
Sorry it may be some thing trivial ???
but i ve a command button i want to center it on the page ????
how???

Hi,
try this steps:
1-surround the command button with panelGroupLayout with layout Horizontal.
2-In panelGroupLayout property select Style tab.
3-in the Text tab set horizontal Align with Center.
4-in Box tab set width with 100 Percent
if panelGroupLayout inside any other component make this palce width 100 percent and its Align Horizontal with Center.
Sameh Nassar

How to change at run-time the type of a step?

Hi,
How topic title, i need to know how change at run-time the type of a step. I have, i my sub-sequence, a step whose type must change at run-time based upon the occurrence of a condition. How can do it?
Thanks.

I need to do this: At verify of a condition, one specific step at the end of sequence must change from statement to numeric limit test and viceversa.
However, is right to no writing self-modifyinf sequence unless handle rece condition on step that i want change at run-time.
Moreover i ask myself: If for change the type of a step i need first delete the substep and later create a new one relative to the step that I want, then it is better and make more sense to create dynamically the step that i would like to have depending on the condition that occurs, right?
Thanks

Can someone tell me how to change obj file in the applet

Thanks in advance.
I have try to use the ObjLoad example in the java3d demo to
change the obj file.But I fail to do this.
I had use twe applet,one to change name,and then refresh the other
frame to try to relod th obj file. but
java.lang.NullPointerException
at ObjLoad.init(ObjLoad.java:150)
at sun.applet.AppletPanel.run(AppletPanel.java:348)
at java.lang.Thread.run(Thread.java:536)
can you help me?
thanks

Sun's Java3d FlyThrough Demo & Java3d Scenegraph Editor
allow you to load mutiple 3d files (sequencially) including VRML
files with the Sun VRML Loaders at run-time
-- and the Java Source Code is free --- ( see below )
First, try a Web Demo of the "Appearance Explorer" :
"Appearance Explorer" Java3d Web Applet, Loads multiple ".obj"
http://web3dbooks.com/java3d/jumpstart/AppearanceExplorer.html
- click on "Data"
- click on "Obj File: Galleon" -- or -- "Obj File: Beethoven"
- rinse, rather, repeat.
|
http://web3dbooks.com/java3d/jumpstart/Java3DExplorer.html
http://web3dbooks.com/java3d/jumpstart/J3DJumpStart.zip
| ^-- free source code
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
| Sun's Java3d Scenegraph Editor showing a Nasa VRML model
| --------------------------------------------------------
|
| uses the Sun VRML Loaders, source code available and is free.
|
| [ at this url: ] http://java3d.netbeans.org/j3deditor_intro.html
|
http://www.frontiernet.net/~imaging/terrain_rendering.html#Scenegraph_Editor
http://www.frontiernet.net/~imaging/terrain_rendering.html
Selman wrote a Java3d book that was well received
and has a Swingtest.java applet and application that
allows you to load objects dynamically,
ie. "change" the viewed object when it is running by
allowing the user to select "sphere" or "cube" from
menu lists ( in this case it's not just displaying
Jav3d primative objects, but it has the core functionality
of deleteing and adding nodes in the scene graph that you
are seeking, and at that point the rest is left as
exercise to the student. The ObjLoad.java in Sun's Demos
directory has the code to load ".obj" files, so you have
all the tools you need.
| Picking of VRML objects with your mouse is demonstrated
| in a new book, Java 3D Programming, by Daniel Selman
| ( shown on the left ).
|
| The source code is avaible for free.
|
| [ here: ] http://www.manning.com/selman/selman_source.zip
|
| This new book uses the old, reliable Sun VRML Loaders for Java3d.
|
| The program reads a 3d scene as a simple VRML text file,
| and displays the Java3d Scene Graph ( which is interactive,
| you can expand and collapse the branches of the scenegraph
| and examine the contents of the nodes ), it renders the
| 3d scene, and when you click on an object it tells you
| what you clicked on.
|
| You can see ( and download ) the Java Source code of
| the operative file: VrmlPickingTest.java
|
| The publisher's site has more informatation on the book.
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
http://www.frontiernet.net/~imaging/sourcecode/VrmlPickingTest.java
The Prentice-Hall books by Aaron Walsh are false & fraudulent
in their claims to present the most current methods, as a part
of the "Couch-Beiter Flame War" and fraud involving Sandy Ressler
at the NIST. Prentice-Hall, Yumetech.com and Aaron Walsh have
misrepresented and disparaged the old & reliable Sun VRML Loaders
in favor of the "new" Yumetech.com Loader, and the web demo above
__ DOES NOT __ load Web3d.org's __ VRML __ files, only the less
capable ".obj" files ... so the "Web3d" series of books from Prentice-Hall
does not show the loading of ___ Web3d.org 's ___ VRML __ files
because Sun's VRML Loaders were the best ones, and the Yumetech.com
folks didn't want anyone using those, and started the "Couch-Beitler Flame War"
to disparage, falsely & fraudulently misrepresent the facts and knowingly
published false and misleading "disinformation" in the
unreliable Prentice-Hall / Pearson Ed books, harming our community.
The Sun VRML Loaders are used by __ Nasa, __
the NSF supported Virtual Chemistry Lab ( "Lab3d" ),
me, and others simply choosing the "what works best",
and by people using Sun's Java3d FlyThrough & Java Scenegraph Editor.
symsan wrote:
|
| Thanks a lot,but can you give some code
| about to change the Obj file or vrml file,
| when the user in the browser to choose
| the file or input to the textField ?
|
I misunderstood the original question ( it was too terse ).
I interpreted the question has how to change the loaded
objects --- between successive runs of the program ---
and not as you intended -- dynamicall while running
the program program without quiting & restarting.
In a "Java3d" forum I'm not going to wander into
how basic ( non-Java3d) 2d commonents such as TextFields
are programmed.
The original Vrml97Player.java file that came with
Sun VRML Loaders also implemented the functionality
of loading mulitiple files ( sequentically during one run )
and I have worked with that and similar things with
the Shout3d.com engine and my own 3d Java engines.
-- Paul, Java Developer & Web Animator
Imaging the Imagined: Modeling with Math & a Keyboard

How to change a value of the field Selection Conditions in Manage- Request

Hi,
How to change manualy a value of the field Selection Conditions in Manage infocube -> Requests ?

Hi,
Here is the reason i need to do this:
The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter, so that the system would not recognize requests as "overlaping requests".
So, where is the information about shown in the field Selection Options is stored? In which tables?
Thanks
Tigr_Z

How to change printer heads on the officejet pro 8500 premier A909n

My Officejet pro 8500 premier A909n will not print color i have cleaned the printerheads a few times and it still wont print colors. How do i change the printerheads? I tried to get the cover off on the right hand side but cant seem to get it off and i really do not want to break it. How does it come off?

Hi there @plbart
Welcome to the HP Forums!
I read about how you are looking to remove the printheads in your Officejet 8500 A909 model.
Check out this guide I have found for you that will show you instructions on how to replace and remove the printheads.
Replacing the Printhead for HP Officejet Pro 8500 All-in-One Printer Series (A909)
I hope this helps, have a great Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to replace a component in the JPanel?

Hi,
I want to replace a component in the JPanel. My panel has GridBagLayout.
Thanks in advance.

because my application demands me to use GridBagLayout.No it doesn't, that a choice you made. You are never forced to use a specific layout manager. In fact most layout problems are solved by using combinations of layout managers. You two main choices are:
a) use a GridbagLayout for the main panel and then a CardLayout for the two components you want to sway, although it may look strange if the components are a different size as the preferred size of the panel will be the size of the largest component
b) Simulate a card layout using:
panel.remove(...)
panel.add(...);
panel.revalidate(...)

How to change font size of the date in notification center?

The language of yosemite system on my macbook pro is “Traditional Chinese”. If the month and day of a date are both composed of two characters, for example, Oct 23 (“10月23日” in Chinese), the last character of the date will go to a new line (as shown in the picture attached). It’s ugly!!!
I think this issue can be solved by decrease the font size of the date. Is there anyone knows how to do this or where the configuration file of the notification center is? Thanks!

AFAIK there is no way to customize this font size. You can't resize the window either.
You need to report it to Apple Feedback so it can be logged and put in the queue to be fixed.
http://www.apple.com/feedback/macosx.html

Satellite S3000: how to change a component on the motherboard?

Similar Messages

Maybe you are looking for