Satellite Server Issue

Not sure if this is the correct forum, if incorrect my apologies,
Good day,
Another ZCM related issue has cropped up, this time with a Satellite server, that is going to be performing the Imaging Role, I have included screen captures of the Satellite server, along with another server that is working, basically the Sxx-Oxx1 server is showing that the imaging role is enabled using the zac satcfg, however; when running the zac satr it reports that the Imaging Role: Enabled: false Status : Stopped (further when trying to restart the service it fails almost instantly)
Any thoughts as to why this service might be failing or what troubleshooting steps I can try next? This is 11.2.4 MU 1, and so far this has been the only site that has been reporting this issue. The installation of the agent and configuration is standard across other Satellite servers, so strange that this one would exhibit this behavior.
We did a quick Google search and found TID 7008789 and it mentions a timeout of 120ms, this site in question does have a slow link, but when we change other services those changes are seen almost immediately,
Any thoughts?
Thank you,
-Dan

dschaldenovell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

Satellite server time was set in the future

According to status in ZCM, workstation time was set in the future (Last Full Refresh: 2/13/11).
The time is now correct.
Workstation in question is also a satellite server.
"Last Full Refresh" is stuck at some point in time on all workstations "closest" to server, new content (bundle) wasn't delivered since.
What is the best course of action?
How can one get rid of the wrong time stamps ?

ZGajsak,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

WebCenter Satellite Server installation failing

Hi all.
Anyone experience issues with WebCenter Sites Satellite Server 11.1.1.6.1 bp1 installer? ssInstall.sh
In the step where configuring which application server is (Websphere, WebLogic or Tomcat) the combo appears empty and the install_log is getting an ArrayIndexOutOfBounds:
[2013-03-04 11:39:16.873][CS.INSTALL][ERROR] ftJDialog.actionPerformed: Exception caught:
java.lang.ArrayIndexOutOfBoundsException
        at java.util.Vector.elementAt(Vector.java:430)
        at COM.FutureTense.Apps.Install.ftJDialog$ftJDialogComboBox.setToHash(ftJDialog.java:2070)
        at COM.FutureTense.Apps.Install.ftJDialog.setToHash(ftJDialog.java:1199)
        at COM.FutureTense.Apps.Install.ftJDialog.actionPerformed(ftJDialog.java:1573)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:6297)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
        at java.awt.Component.processEvent(Component.java:6062)
        at java.awt.Container.processEvent(Container.java:2039)
        at java.awt.Component.dispatchEventImpl(Component.java:4660)
        at java.awt.Container.dispatchEventImpl(Container.java:2097)
        at java.awt.Component.dispatchEvent(Component.java:4488)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
        at java.awt.Container.dispatchEventImpl(Container.java:2083)
        at java.awt.Window.dispatchEventImpl(Window.java:2489)
        at java.awt.Component.dispatchEvent(Component.java:4488)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
        at java.awt.EventQueue.access$400(EventQueue.java:81)
        at java.awt.EventQueue$2.run(EventQueue.java:627)
        at java.awt.EventQueue$2.run(EventQueue.java:625)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
        at java.awt.EventQueue$3.run(EventQueue.java:641)
        at java.awt.EventQueue$3.run(EventQueue.java:639)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
        at java.awt.Dialog$1.run(Dialog.java:1044)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:666)
        at java.awt.EventQueue.access$400(EventQueue.java:81)
        at java.awt.EventQueue$2.run(EventQueue.java:627)
        at java.awt.EventQueue$2.run(EventQueue.java:625)How can I fix this issue to continue with the wizard installer?.
I will verify SatelliteServer.xml file (inside it are the combo values).
Regards.

Changing JDK used to launch installer solved the problem :).

Satellite Server. Role is enabled but status is stopped

I have a satellite server (SLES 11.3) that has two roles assigned: imaging and content. Imaging is working fine, but when I run zac satr, it reports:
Role: Content Enabled: true. Status: Stopped.
I've tried removing that role and then readding it, but get the same result. Is there a way I can force it to try to start so I can check the logs (zmd-messages? is that the right log to be checking?) and see where it's failing? Are there rpms that I can reinstall that might correct it?
The one complication with this machine is that it used to be a primary server. I went through the primary server uninstall process and then set it up as a satellite. Everything was working fine, but now I'm running into this problem.
I appreciate any thoughts the community might have on this problem.

chndrcks,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Satellite Server traffic v Primary Server traffic

I recently did a packet trace on a workstation and noticed a lot of traffice going to the primary servers and not just the satellite server.
I have a 10.3.3 environment with Windows 2003 servers and Full SQL 2005. A Windows XP workstation as a satellite server. That satellite server has Content, Authentication and Collection configures. It also has a Closest Server Rule set to a CIDR /16 IP address.
I am not sure why, but the workstation seems to hit the primary server first and even another primary server second. Then during login it does seem to hit the satellite server a bit but it hits the primary server just as much and like I said earlier it seems to hit another primary server that isn't configured for that site. I do have content on all Primary servers so I understand it hitting these servers some, but during authentication and during content retrieval I am confused at why it wouldn't be smacking the satellite server to no end and not the primary servers.
I need to make sure I have satellite servers and primary server configured correctly due to connection issues. Please, any help on configuration would be appreciated. Thanks.

melnikok,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Prob. re-registering satellite server

Hi all: having a bit of an issue with a satellite server. I decided to completely remove all roles from one of our sat servers, un-register it, remove the agent, and reinstall. This all proceeded fine but I am not able to register the server into the zone. The command zac reg -k key https://serverort returns an error:
Unable to register with server https://-------
Service Error. code: -28, message: Internal Datamodel exception with trying to create/update device: XXXX
xxxxx
xxxxx
You are not logged in.
Any suggestions? Thanks, Chris.

All fixed. For some reason, after about 2 hours I was able to register them.
>>> Chris<cmosentine@N0_5pam.vrapc.com> 2/1/2011 8:32 AM >>>
Hi all: having a bit of an issue with a satellite server. I decided to completely remove all roles from one of our sat servers, un-register it, remove the agent, and reinstall. This all proceeded fine but I am not able to register the server into the zone. The command zac reg -k key https://serverort returns an error:
Unable to register with server https://-------
Service Error. code: -28, message: Internal Datamodel exception with trying to create/update device: XXXX
xxxxx
xxxxx
You are not logged in.
Any suggestions? Thanks, Chris.

Verify the policy or bundle update by a satellite server

Hi all,
I am using a satellite server for my branch office, how can I verify or determine the clients in branch is updated by satellite server?
How can I check it?? Any report?
Thanks!!

manng228,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Regarding Sun Java System Application Server Issue with JVM

Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
Gagan

Do you have ANT installed and available?
Thanks,
Kedar

HT4859 After the i-cloud server issue Nov 26, 2012, I had to change some mail account settings to get my i-cloud mail to work again. However, all of my received e-mails are gone. How do I retrieve my e-mails from the server?

After the i-cloud server issue yesterday, November 26, 2012, my i-cloud mail account on my Macbook Pro stopped receiving mail. I changed some mail account settings to fix the issue, and was able to start receiving e-mails. However, all of my historical e-mails are gone. How do I retrieve all of my old e-mails from the server?

What settings did you change, what were the changes, have you visited www.icloud.com to see what mail is actually there? and do you have a backup?

HP Connected server issues

My printer has been working well *. since I purchased it earlier this year. until about a week ago when I upgraded to the next level Instant Ink plan. Since then when I try to print the display on the printer shows a rotating circle with the word Printing. This remains for around 2 minutes, without printing anything, and then I get a message on the display that tells me that "The printer cannot connect to HP Connected". At the same time I get a pop up on my PC that "warns me" that the printer cannot connect to HP Connected and that this may cause my printer to stop printing. The terrible message concludes with the meaningless "OK" statement, having urged me to follow the printer's on screen display to make the connection. When I try to follow the instructions on the printer it merely confirms that the printer is connected. I usually cancel out of the setup and then, as if by magic, whatever I tried to print suddenly starts printing. So, my questions are?
1) Is this a common or at least know problem?
2) Is it caused by my having changed Instant Ink plans and if so what has HP done to cause this?
3) I have not knowingly changed anything on my system other than the HP Instank Ink plan so why does the printer no longer connect to the HP Connected server to update that system with details of my print usage?
4) Is there a fix/workaround that will prevent me from having to manually coax my printer to work again?
I have already used the HP Updates function and have reset/restarted both the wireless router and my PC.
* I do occasionally get messages saying that the scan function isn't available because it's lost connectivity but this seems to rectify itself without having to do anything else.

Hello GaryG888,
Welcome to the HP Support Forums!
Thank you for the very informative post. With that great info I think I know what has happened. Over the weekend (24th, 25th & 26th) there had been Web Service server issues. As of right now, here is the fix and or workaround: Re: How do I correct the date on my HP Envy 4500?
Please follow up and let me know if this helps you.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Unable to Delete a Satellite Server

I have a satellite server (server class machine)11.1.x . That i want to get ride off. I removed it as a satellite server and it is no longer showing as a Satellite in the Server Hierarchy. I Ithen try to delete the server, I get unable to delete the object error in ZCC when I try
Tried using zman sd /devicepath but am getting the device has associations or dependencies. Delete those first.
I cannot see any kind of dependencies or association anywhere. I have looked at at the Locations made sure it is not in any. There are no policies or bundles associated with the device.
Any suggestions?
Paul Lamontagne
Lamtech Consulting Inc.

Originally Posted by Paul Lamontagne
The device was on and was comminication as I see the last contact time.
I tried to removed the ZAA and it did a local uninstall only....
So now it no longer communicates to the zone, and i cannot delete it out of
ZCC and i tried to install the 11.2.4 agent and now get a missing libxxx.so
file
This is in a lab as well, but I hate not being able to "clean it up before I
install 11.3.1..
Paul
>>> On 08/09/2014 at 7:18 AM, in message
<NfgPv.6120$[email protected] m>, nop1983<[email protected]>
wrote:
> PaulLamontagne wrote:
>
>>
>> I have a satellite server (server class machine)11.1.x . That i want
>> to get ride off. I removed it as a satellite server and it is no
>> longer showing as a Satellite in the Server Hierarchy. I Ithen try to
>> delete the server, I get unable to delete the object error in ZCC
>> when I try
>>
>> Tried using zman sd /devicepath but am getting the device has
>> associations or dependencies. Delete those first.
>>
>> I cannot see any kind of dependencies or association anywhere. I have
>>
I could've sworn someone else ran into something similar with this, but I don't recall what the solution (if any) was.
I thought that for a satellite server that it was acceptable to delete it if you could only do a removal only
Maybe you can reinstall the agent on the machine and then see if it'll reconnect and let you demote it?

Sorry, we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer

We have about 200 users that connect to three terminal servers. On the servers we have Office 2013 installed. Several users are stating that when they attempt to search for templates or insert Online Pictures, they are getting error messages of "Sorry,
we are having some temporary server issues. You can work off line if you plan to insert pictures from your computer"
Remember, they are connecting to a terminal server, all have roaming profiles, and for some users this works fine.
We've Googled the error message and found no help. A lot of responses was to reset the IE settings, which we've tried to no avail.
Also as a test, we took one of the users that was having the issue and deleted their profile. When they logged back on the server, the same problem occurred again.
We're currently at a loss as to why it works for some users and not others?
Any ideas out there?

You can refer to this link and find the possible solution which is to delete the offending registry key:
HKCU\Software\Microsoft\Office\15.0\Common\Internet\WebServiceCache\AllUsers\office15client.microsoft.com
http://angrytechnician.wordpress.com/2013/05/15/office-2013-error-sorry-we-are-having-some-temporary-server-issues/
There we can also find information about deploying logon script to all roaming profile users to resolve this issue.

Help!Electronic noises,server issues,console messages,ethernet -PowerPC G4

I've been searching the internet as well as the Console and Activity Monitor for answers to this scenario, and it looks as though there is some kind of relationship between recent strange sounds I have been hearing over my speakers and server issues (my IP? Apple servers? spyware? )
Immediately below, are some of the log messages I have copied (for terminology examples).
Below them will be the description of the sounds I've been hearing, and potentially related details.
The first of the log examples documents something that happened when no one was home to use the computer. The second describes some kind of process that might be suspicious. The third describes what is happening a lot lately, and it seems to correspond with the sounds I referred to as well as with simultaneous increases in network activity shown on the Activity Monitor
Apr 8 14:01:13 Macintosh kernel[0]: System Sleep
Apr 8 14:01:13 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-000000000000” instead
Apr 8 14:01:13 Macintosh kernel[0]: System Wake
Apr 8 14:01:13 Macintosh kernel[0]: Wake event 0020
Apr 8 14:01:14 Macintosh configd[65]: posting notification com.apple.system.config.network_change
Apr 8 14:01:16 Macintosh kernel[0]: USB caused wake event (EHCI)
Apr 8 14:01:16 Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default “Macintosh-00112474A206” instead
Apr 8 14:01:17 Macintosh kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Mac OS X Version 10.4.11 (Build 8S165)
2009-04-09 23:06:12 -0400
2009-04-09 23:06:18.315 HPEventHandler[216]: DebugAssert: Third Party Client: (NULL != m_lock && 0 == errno) Can't create semaphore lock[/Volumes/Development(Build System)/HP/Mac-Fontana/mac-software/components/HPEventHandler/Sources/Core/HPTM NotificationManager.cpp:62]
2009-04-09 23:06:25.995 SystemUIServer[207] lang is:en
Will Power On (Wake) Notification occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:49 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 11:21:55 EDT - Network transition occurred.
2009-04-09 12:01:12 EDT - Sleep Notification occurred.
I have recently been getting both a tapping and a buzzing sound through my speakers. Both kinds of sounds come together, intermittently and repeatedly, and each time, the volume rises, peaks, and fades away again (or stays faint until it starts to rise again). Today, once, there was a squeal-ish sound (not like a fax) as well, paralleling the other sound. These episodes vary in duration.
The Activity Monitor has shown increases in the Network window when these sounds have occurred, but I don't remember whether the greater increases were incoming or outgoing--I think, incoming.
When this first started happening, I was also seeing a lot of "Network Transition Occurred" messages in the log. Now I am seeing mostly "Macintosh mDNSResponder: Couldn't read user-specified Computer Name; using default "Macintosh-000000000000” (or “Macintosh-00112474A206)” instead" messages.
It all started happening after I uninstalled a trial version of ProtectMac (at the end of March), as well as set up a separate log-in for my grandson to use (major changes for the first time in years, which also caused me to lose a lot of things like bookmarks, saved music in iTunes, home movies in camera related software, pictures in iPhoto, etc...). Somewhere along the line I also lost iSync and just left it off.
Are these noises servers trying to communicate with my computer, which I somehow happen to be hearing as transmitted static/feedback/or signaling?
I have a 1.42 GHz PowerPC G4. I use a DSL, ethernet.
Thank you.

Hello,
Try these DNS numbers.
Try putting these numbers in Network/Advanced/DNS.
Add these numbers to DNS Servers
208.67.222.222
208.67.220.220
Click OK. These are safer/faster than most ISP's NDS numbers, and have been patched against DNS poisoning.
Go here to test DNS. https://www.dns-oarc.net/oarc/services/dnsentropy
Carolyn

Temporary Server Issue

Hi,
I just installed Microsoft Office Professional Plus 2013 on my newly installed Windows 7 Ultimate computer. When I try to sign in a message pops up saying "Sorry, we are having some temporary server issues." I have read other forums and this seems
to be an ongoing issue. I have looked at the Procmon and everything seems to be working. Is there anyway I can fix this problem?
Thanks.

Hi
Please verify whether you have installed the following updates: (KB2768349,
KB2767861, andKB2760624
Uninstalling these updates may help.
Then, to run an online repair, follow these steps:
1.Open Control Panel.
2.Click Programs and Features.
3.Click Microsoft Office 2013.
4.Click Change, click Online Repair, and then click Repair.
If that doesn’t work, we recommend you to pen up IE. Choose "Internet Options". Select the "Advanced" tab.
At the bottom it says, "reset internet explorer settings" . click "Reset".
Check the "Delete personal settings". Click "Reset"
Restart your computer.
Regards
Tylor Wang
TechNet Community Support

Multiple access server issue remotely

I have two rack with two access server.How can I access both remotely with linksys router.I did port range forwarding but only one rack is accessible.Please advise

A TCP connection to a router is established using an IP address. Using the host name is valid only when you are initiating an rcp or rsh command from a local router. The host name is converted to an IP address using Domain Name System (DNS) or host-name aliasing. To allow a remote user to execute rcp or rsh commands on a local router, you must create an entry for the remote user in the local authentication database. You must also enable the router to act as an rsh or rcp server. To enable the router to act as an rsh server, issue the ip rcmd rsh-enable global configuration command. To enable the router to act as an rcp server, enter the ip rcmd rcp-enable command. The router cannot act as a server for either of these protocols unless you explicitly enable the capacity

Satellite Server Issue

Similar Messages

Maybe you are looking for