Satellite server time was set in the future

According to status in ZCM, workstation time was set in the future (Last Full Refresh: 2/13/11).
The time is now correct.
Workstation in question is also a satellite server.
"Last Full Refresh" is stuck at some point in time on all workstations "closest" to server, new content (bundle) wasn't delivered since.
What is the best course of action?
How can one get rid of the wrong time stamps ?

ZGajsak,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

System time was set externally in the past.

Hi Gurus,
In our production system,several warning messages have come up System time was set externally in the past. Wait 1 second(s).
But when i checked the system time it showing the same as OS's.
Could you please throw some information around this and how these warnings can be avoided?
Thanks
Sabya
BASIS ENTHUSIAST

Hi Sabyasachi,
What's your OS Version?
Is your SAP application hosted on Windows Server.
Please check-out SAP Note-447839.
Also to brief you about this common issue where in sometimes the OS time is reset back in the past and the SAP application observes this an warning and in severe situations as an ABAP dump.
On windows server, if the automatic synchronization of timezone is enabled it synchronizes to a master time server. Actually this should be fine, but in case of Windows server, what happens is that every time the synchronization happens from a master time server, the SAP server gets a hard reset i.e. Sudden decrease of time at the time of synchronization like from 11:45 AM to 10:45 AM. This kind of behavior affects the applications running on the server. This should have been soft reset i.e. 11:45 AM time should go back in time in fractions over the entire week (Soft Reset) until it is synced in real time. SAP applications running on windows server implemented with Hard reset of Time are absolutely not supported and in that case the hard reset must be refrained at all costs. Refer SAP Note 447839 for further details.
To narrow down the root cause of OS time shifts you can run a watchdog tool SAP time trace tool which logs the OS time every 5secs, so the next time whenever this occurs in the system it can be investigated what happened to the OS time at that instance.
If the described case matches with your scenario, you can disable the Automatic time synchronization feature on the windows server.
Regards,
Akshay

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

When I was setting up the language Setting, I pressed the play/pause button three times and now the voice that talks you through everything speaks extremely fast. How do I get her to speak slower?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

System time was set externally in the past. Wait 1 z second(s).

Hi,
We are getting the follwing message in our production environment.
System time was set externally in the past. Wait 1 z second(s).
The system time is same as SAP time
Pls let me know of what has to checked to correct the issue
Edited by: Balaji Rajendran on Jun 20, 2008 5:18 PM

Hi,
Time zone can be changed at SAP level and this reflects at database level.
Have look at these transactions.. Check your logs and see wthhr someone changed the time zones.(sm20/st03(n)/stad)
STZAC Maintain time zone act.in client
STZAD Disp.time zone activate in client
Also check note 198411
Rakesh

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??

Last night as I was setting up the pin I got distracted and entered the wrong one, now I can't access my phone as I don't know what I entered. Is there anyway around this or do I have to wipe my phone and sign in with my Apple ID and restore from icloud??
I can't ask for help on chat as I'm away from home and don't have the box with me, and obviously can't get the serial number in my phone as I've locked myself out!!
Any help will be much appreciated!!

https://support.apple.com/kb/ht1212

No Dimension Server entry was found in the EPM registry

I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.

Avishek wrote:
I have installed 11.1.2.3 on Linux 64bit.
I can log into the EPMA workspace but not able to open the calculation manager. And when I try to open it I get this error:
No Dimension Server entry was found in the EPM registry.
Please ADVISE. Thanks.
Have we not been here before and you asked similar questions?
https://forums.oracle.com/thread/2482930
https://forums.oracle.com/thread/2473594
Cheers
John
http://john-goodwin.blogspot.com/

"Measurement time cannot be in the future ".

Hi Gurus
I am doing testing for a Computer manufacturing company.When i am trying do confirmation against a production oder via t code CO11N system giving the message "Measurement time cannot be in the future ".
Could you pls help to resolve this issue.
Regards
Sandip

Hi
Posting date is the current date.The details of the error given below.
Measurement time cannot be in the future
Message no. IR023
Diagnosis
The measurement time that you have entered is in the future.
A measurement reading describes an actual state, and therefore the measurement time cannot normally be in the future.
System Response
Processing will not be continued.
Procedure
Enter a measurement time in the past.
If this is an exceptional case, contact your system administrator.
Procedure for the system administrator
In exceptional cases, tolerances must be allowed in the entry of measurement times.
Example:
Measurements are taken automatically and are then transferred to the SAP System. The system time of the measurement system varies from that of the SAP System for technical reasons.
You can define an appropriate tolerance level in Customizing for each measuring point category.
Pls suggest some solution.
Regards
sandip

ABORT was set in the customer routine 9998

Hi Experts,
Have any one faced below issue in Production system.
"Error 1 in the update
:ABORT was set in the customer routine 9998"
Regards
Ramesh

Hi,
Pls check in SDN, there are some similar kind of threads.
ABORT was set in the customer routine 9998-
/message/6784932#6784932 [original link is broken]
update rules error
Thanks
Reddy

HT5622 I was setting up the new IOS and came to the point where I needed my Apple ID and password

I was setting up the new IOS and came to the point where I needed my Apple ID and password. I had to go and change it before proceeding, now I can't get back to the setup. Can you tell me how to go back and finish the setup?

Settings > Store > Sign Out.
Sign in with the correct ID.

Using laptop in many envirouments (home, office, university..) made change every time the proxy server. May Firefox (in the future..) have same facilitation to learn or try itself to set the correct proxy against the networks?

In may network envirounments there is a proxy server. I mean, at the office there is one, at the University another one, at home none...
Every time I get a new place of this I have to change manually the proxy configuration. I think this is not so confortable. I discovered a Antivirus SW that has implemented that idea: First the sw try with the proxy settings, if it's failed it try without. It's not the best, but at own home this make sense. May firefox use more intelligent (may be autolearn: I mean by network id firefox can associate the proxy settings) proxy configuration settings.
Thx a lot!
FaB

You can look at these extensions:
*FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
*QuickProxy: https://addons.mozilla.org/firefox/addon/1557
*SwitchProxy: https://addons.mozilla.org/firefox/addon/125

My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

My iPhone was set to the wrong ICloud account; how can i reset it so it is on the same one as my iPad and MAC?

My new iPhone was mistakenly setup with a new account diferent from theone on my iPad and MAC, iTunes and Mobile Me. I finally got Lion and moved my MobileMe to iCloud. I then found out this mistake when my iPhone was not synching with my iPad and MAC. the onloy way I can see to fix this is reset the account my iPhone iCloud if set to, but see not way to do that or any instruction to do this resetting. Does anyone know how to do this?

Go to Settings>Mail, etc.>iCloud and delete the account. Then add in a new account with the details you want.

Server time out setting up email

on my iphone I keep getting this message when trying to set up an email account. The connection to the server mail.xxxx.com on port 993 timed out

I recommend deploying an AJAX solution if you have to wait that long, so the page populates on the fly.
I can't replicate this issue. On websites that have this problem, Safari waits 2-3 minutes if it has to.

Can i select different OS time machine backups in the future?

I have finally gotten Lion upgraded over snow leopard after hard drive failures, restoring from time machine a leopard os and then upgrading over it.
now i'm ready to start backing up with time machine on the new lion drive and intend to keep the old snow leopard backups, i guess.....
if i ever need to go back to a snow leopard backup, can i SELECT which backup i want to restore to in time machine or am i required to restore to the most recent backup in future uses of time machine. The most recent will be Lion backups as soon as i start backing up. Can I mix them in the same time machine volume? Old snow leopard ones and new lion backups?
should i go ahead and start backing up and just take note of the date i began the new Lion OS?
another thing -- it's weird that it seems i slide down for the opposite direction of scrolling in lion than it did in snow leopard?

It is a Time Machine and what's the use if it can't go forward and bring back your completed work files?
Really, I don't know why people complain so much.

Satellite server time was set in the future

Similar Messages

Maybe you are looking for