Satellite T110-11U - Increase the volume

I have tried everything to increase the volume on my brand new laptop but I have had no luck, I am assuming the speakers are just inadequate. Nice one Toshiba.
I have also tried plugging headphones in and the little speaker icon comes up with and X on it saying 'no audio output device is installed'.

Try this..
Right click the speaker in the 'system tray', bottom right.
Choose "sounds"
Choose the "playback" tab and highlight the "connexant pebble speakers "
Ignore "configure" and choose "properties"
In the "levels" tab, whack the slider up to max
hit the "balance" button and put the sliders up to 100 for left and right
Now on the "enhancements" tab, UNtick everything.
Try it now.
Worked a treat for me, is all I can tell you.
Tinny, for sure - as you'd expect - but plenty enough volume ..
Within reason - you won't annoy the neighbours with it.
Unless you smack 'em around the head with it.
That would work.
Good luck..

Similar Messages

  • Satellite T110-11U - Can't find the WLAN router

    Hi,
    I have a Toshiba Satellite T110-11U. Have had it since Feb and loved it - happily used it wireless throughout the house. Then one day about a month ago unless I was in the same room as the wireless router, wireless doesn't work. I have 2 other laptops (and an iPhone) that still connect wirelessly throughout the house and the garden without problem.
    As you can imagine, this was very strange. When I take it out in to the garden, my other laptops find all the wireless networks in the area, but my Toshiba finds none.
    Suspecting it was a driver issue, I made sure the wireless drivers were up to date. With no joy there, I recovered the system to as it was when purchased (doing a full restore by interupting the booting up and letting the hard disk be wiped and reinstalled etc). Still the same problem. I've even changed the rooms the router is in, and the same problem - the Toshiba can't find the router unless the router is within a couple of metres of the laptop.
    Before I lose the will to live, can someone suggest the cause of my problems, or is it time I admitted defeat and took it back to comet under warranty (where the will probably test it next to a wireless router and tell me all is fine!).
    Many thanks,
    Steve.

    >the Toshiba can't find the router unless the router is within a couple of metres of the laptop
    Does this mean that the T110 can find the wlan but only if its placed near the router?
    Just other hint;
    Go to BIOS and set it to default! Ensure hat Wlan is enabled and dont forget to save the changes.
    You should also go to control panel -> device manager -> Wlan card properties -> Advanced tab.
    Should check the Wlan settings like the Wlan encryption, Wlan channel, etc
    Be sure you have enabled the WLan card on your notebook as well!

  • Satellite T110-11U - WiFi works only in one room

    Wifi on my LP used to work perfectly in each room of the house, but since I've installed Norton Antivirus it only works in my bedroom (where the router is) and nowhere else.
    However, other laptops work ok in the other rooms. I thought is was because of Norton Antivirus and I reinstalled it, but this didn't help. It's already 3 months since then and my LP only gets the signal in my bedroom. So it's got a problem of getting signal even in about 3 meter distance. I've already checked the wireless router with the supplier and there is no problem with it. The problem is in my laptop. I updated drivers but no luck. I've got Toshiba Satellite T110-11U, Windows 7 Home Premium.
    If anyone can give me any advice regarding this would be highly appreciated!

    Hi buddy,
    Maybe there are still some registry keys of Norton Antivirus stored in Windows registry I would try a registry cleaner like CCleaner. This is really nice freeware tool to clean the registry.
    What WLAN card driver is installed at the moment? Newest WLAN drivers can be downloaded here:
    http://aps2.toshiba-tro.de/wlan/

  • IS THERE A WAY OF INCREASING THE VOLUME ON A USB DOWNLOADED WITH I TUNES? WHEN I PLAY MUSIC FROM IT IN MY BMW IT IS NOT VERY LOUD.

    IS THERE A WAY OF INCREASING THE VOLUME ON A THUMB DRIVE DOWNLOADED WITH ITUNES MUSIC? WHEN PLAYBACK ON BMW RADIO, EVEN WITH THE RADIO VOLUME AT MAX, MUSIC IS NOT VERY LOUD.

    Can't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.

  • Whilst playing a selection from a CD I've put in my CD drive, I select Controls and then wish to increase the volume.  It tells me to Press Control and then Up.  Where is the Up button please ?  Thank you.

    My question is how do I increase the volume when playing a CD in iTunes.  The volume slide is at full, but when I press Controls, it tells me to press Control and UP.  Where is the UP on my PC or is it on the screen ??
    Thank you.

    It means the UP arrow on your keyboard. Depending on your keyboard, it is usually located on the right hand side of the keyboard, either with the numbers keys or below the Enter (Return) key.
    However, Control/Up will simply attempt to move the slider in your iTunes programme further up. If the slider is already at the top, then those keys will have no effect, since the iTunes volume is already at maximum. Perhaps your computer's volume controls need adjusting.
    In Windows XP, I believe (if I recall correctly) that the volume control is in Start/Accessories/ and either Volume or Mixer. In Windows 7, it's in Start/Control Panel/Hardware and Sound/Adjust Sytem Volume.

  • Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

    Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
    There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
    What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

    If that's the best you can do why don't you get on another forum?

  • How can i increase the volume of 6plus when make phonecalls

    How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?

    Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.

  • How i can increase the volume when i playing a video? dont showing the volume control in the player..

    how i can increase the volume when i playing a video? dont showing the volume control in the video player..

    Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

  • Increasing the Volume of a Garageband Recording in Logic Express 8

    I'm new to Logic Express, but I'd like to use it to increase the volume of a multi-track recording that I made in Garageband. (Of course, there may be a way to increase the volume of the recording IN Garageband; however, if so, I don't know how to go beyond the 6 db level that seems to be the max for each track.) Here's what I tried to do: I imported the mixed-down, AIFF audio file that I made in Garageband into Logic Express and then I pushed the master volume slider to the maximum. I then saved and exported the file from Logic Express as another AIFF file (with a different file name, of course), thinking that the new recording would be louder. It wasn't. Any idea what I might try next? Thanks in advance for any help.

    I've found an answer to my own question. I simply imported the recording that I made in Garageband into a new Garageband file and then turned up the volume. I'd still like to know how to do this in Logic Express, though, since I'd like to move to that more sophisticated program.

  • Increasing the volume on flv files

    I've got about 200 flv files have issues with volume. I need to increase the volume on each. Is their a quick and easy way. They all load into the one swf file so is there any code I can add to the swf the will automatically increase the volume of any flv thats loaded into it? Thanks

    If you use Netstream:
    var ns:NetStream=new NetStream();
    var nsst:SoundTransform=new SoundTransform(1);
    ns.play('filename.flv');
    ns.soundTransform=nsst;
    nsst.volume=2;//This alone will not change the stream's volume
    ns.soundTransform=nsst;// You have to reapply it by doing this again
    [source]

  • How can I increase the volume of my text alerts without increasing call volume??

    The alerts that are pre-programed on my phone for text alerts are very quiet.  When I turn the volume up so that I can hear them then my call volume is embarrassingly loud.  I have tried to get new tones in the store but they all seem to download to my ringtone - not text tones.  I have even purchased (from the Verizon store) tones that are for texts, but again, they download into my call ringtones.  Any suggestions would be great since I am a big texter and am getting very frustrated because of missing so many.

        @Halon,
    I know how you feel! Text messaging is my main means of communication so I use it all the time. I definitely don't want you missing any important text messages because you can't hear the alert.
    Keep in mind that the volume level will increase or decrease the same for both calls and text alerts. You may notice that the ring tones options for the text messages are not as loud as the ones for calls. Unfortunately, there is no way to increase the volume for the text alerts without increasing the volume for the call alerts as well.
    One thing you can try is turning in the Vibrate mode so the phone vibrates also when you receive a text messages. Visit http://vz.to/1aflRJ0 for steps.
    Keep me posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • How can I increase the volume on an audio track imported from a GarageBand project, beyond the  11

    I have an audio track, mp3, originally recorded in GarageBand, but with an recording level set too low.  I've now adjusted the volume in the audio track to the max, but during playback it's still rather quiet.  I have to turn the volume on my Mac to the max to have it at an acceptable playback level.  Is the any why to increase the volume on that track any further?

    http://www.fcpbook.com/Audio1.html

  • What is the best way to increase the volume for the phone?  My Dad has a hearing aid and could use more volume.

    What is the best way to increase the volume for the phone?  My Dad has a hearing aid and could use more volume.

    https://itunes.apple.com/gb/app/hearyounow-your-personal-sound/id569522474?mt=8
    Have a look here and in particular
    "Customers also bought "

  • Is there any way to increase the volume beyond maximum volume?

    Is there any way I can increase the volume on the internal speaker on my MAC Pro Tower beyond what it is at maximum volume? 
    Thank you.

    Depending on what you're trying to do, there are a few solutions.
    If you're just using the machine normally & playing games, etc, then get some amplified speakers, or if you have a stereo system available at your work/home you can get an adapter cable that will let you run from the line out of the Mac Pro to the input jack on your stereo.
    If you're looking to so more serious audio production, then look for an audio interface.  Companies like M-Audio, MotU (Mark Of The Unicorn), Akai Pro, and Apogee (among others) make some great devices that connect via USB or Firewire, and will offer better sound out, which you can then connect either to an amplifier, studio monitors, or even PA gear.

  • Is there a way to increase the volume on the mini? Are there speakers you can attach?

    Is there a way to increase the volume on the mini? Are there speakers you can attach?

    I get this:

Maybe you are looking for

  • FM to create subcontracting delivery lines

    Hi Folks, We are using one custom function module to create subcontracting delivery lines. Inside this custom FM, we are using ME_COMPONENTS_MAINTAIN function module first to maintain the components and then ME_UPDATE_SCHEDULES_DISPO to create delive

  • How to get file name using File adapter Sync read

    Hi All, I am using SOA 10.1.3.3 and JDEV 10.1.3.3. I have an async bpel process. I have to read file name in this process... so i have used file adapter sync read operation. How can we get the file name with out payload using sync read. For normal re

  • Text problem in SAPScript

    Hello, i have a problem i need to print one recepit with sapscript. I have to made a changes in displaying the text in o/p but it is in different language i.e PT text to display is IVA NÃO REGULARIZADO – ARTº 71 CIVA Now if you see above in sentence

  • Test an empty file

    Hi, I have to load data from file into oracle table, but if this file is empty, my scenario fails because of table constraints. Can I evaluate if the file is empty in ODI before start loading? thanks Fabrizio

  • Extracting Word Files from InDesign

    I am looking for some advice. At my company we create paging files in InDesign, and after the project is completed, we need to extract an RTF Microsoft Word file of the text ONLY, maintaining all Word paragraph/character styles. We do this so that cl