Satellite T110-11U wont start up

Hello,
Just tried to boot up my T110-11U and got 3 quick beeps followed by 2 slow beeps, any ideas?
I tried removing the RAM and swapping them around & also tried some ram I know works out of my other laptop without and success.
Any ideas? Also the screen does not come on at all just keeps making the beeping sounds.
Thanks for any replies...............
Neil

Hi
The beep codes means that an error on motherboard has been detected.
The notebook supports Phoenix BIOS.
You can google for Phoenix BIOS beep codes to check what this could mean.
But generally its something with hardware so possibly you will need a new board.

Similar Messages

Satellite T110-11U - WiFi works only in one room

Wifi on my LP used to work perfectly in each room of the house, but since I've installed Norton Antivirus it only works in my bedroom (where the router is) and nowhere else.
However, other laptops work ok in the other rooms. I thought is was because of Norton Antivirus and I reinstalled it, but this didn't help. It's already 3 months since then and my LP only gets the signal in my bedroom. So it's got a problem of getting signal even in about 3 meter distance. I've already checked the wireless router with the supplier and there is no problem with it. The problem is in my laptop. I updated drivers but no luck. I've got Toshiba Satellite T110-11U, Windows 7 Home Premium.
If anyone can give me any advice regarding this would be highly appreciated!

Hi buddy,
Maybe there are still some registry keys of Norton Antivirus stored in Windows registry I would try a registry cleaner like CCleaner. This is really nice freeware tool to clean the registry.
What WLAN card driver is installed at the moment? Newest WLAN drivers can be downloaded here:
http://aps2.toshiba-tro.de/wlan/

Satellite T110-11U - Can't find the WLAN router

Hi,
I have a Toshiba Satellite T110-11U. Have had it since Feb and loved it - happily used it wireless throughout the house. Then one day about a month ago unless I was in the same room as the wireless router, wireless doesn't work. I have 2 other laptops (and an iPhone) that still connect wirelessly throughout the house and the garden without problem.
As you can imagine, this was very strange. When I take it out in to the garden, my other laptops find all the wireless networks in the area, but my Toshiba finds none.
Suspecting it was a driver issue, I made sure the wireless drivers were up to date. With no joy there, I recovered the system to as it was when purchased (doing a full restore by interupting the booting up and letting the hard disk be wiped and reinstalled etc). Still the same problem. I've even changed the rooms the router is in, and the same problem - the Toshiba can't find the router unless the router is within a couple of metres of the laptop.
Before I lose the will to live, can someone suggest the cause of my problems, or is it time I admitted defeat and took it back to comet under warranty (where the will probably test it next to a wireless router and tell me all is fine!).
Many thanks,
Steve.

>the Toshiba can't find the router unless the router is within a couple of metres of the laptop
Does this mean that the T110 can find the wlan but only if its placed near the router?
Just other hint;
Go to BIOS and set it to default! Ensure hat Wlan is enabled and dont forget to save the changes.
You should also go to control panel -> device manager -> Wlan card properties -> Advanced tab.
Should check the Wlan settings like the Wlan encryption, Wlan channel, etc
Be sure you have enabled the WLan card on your notebook as well!

Satellite T110-11U - Error message when starting computer

I have a 6 month old Satellte T110-11U running a manufacturer installed OS - Windows 7. Every time I start the computer I get an error message:
There as a problem starting , C:\ users\home\AppData\local\imagusud.dll , The specified module could not be found. I can ignore the prompt, but would like to sort it out.
Does anyone known how to resolve this issue?

Hi
It looks like something would be corrupt in your user account.
Did you try to repair the OS or to clean the registry using CCleaner?
CCleaner is a free tool which cleans the registry and removes garbage from the HDD.
Try this.
Otherwise you can check the msconfig -> Startup tab.
There you should search for some entries containing the imagusud.dll file and could disable or remove this
Good luck

Satellite Pro 4220 wont start

dear users,
Ive got a problem with my old toshiba laptop it is an 4220 satellite pro pentium III. I have a problem with the power i guess, the computer wont start. If i press the power on button, with the adapter in the socket power nothing happens. Now the green led for power is on but the orange led is flashing on and of, but the laptop wont start. What must i do, buy a new accu? a new adapter or is internally wrong with the laptop?

Hi
Sorry but there is nothing to do. You must contact service partner. Let them check it. They can read this code and localize the defect.
I dont know in which country you live but please check the ASP list.

Satellite Pro L850 wont start up when USB3 cable to Dynadock is connected

Hello,
I have a new L850 and Dynadock ( PA3927A-1PRP). The L850 wont start up when the USB 3 is connected and the screen flashes gray then black. If I remove the USB3 then the L850 will start up and if I then reinsert the cable it continues to start and work fine.
I have uninstalled and then reinstalled the Dynadock viewer drivers from the Toshiba website.
Perhaps I have the cables in the wrong slots? It is connected as per the Dynadock quick start guide.
I would appreciate some assistance.
Thanks - Mark

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Satellite 2410-504 wont start

Hi All
I have a sick toshiba Satellite 2410-504 laptop.
When booting up it says:-
"Windows could not start because the following file is missing or corrupt: <Windows root>\system32\ntoskrnl.exe
Please re-install a copy of the above file."
Ive put the Windows CD in the CD drive and I've gone into the BIOS and set the CD-ROM as the first Priority but it fails to boot from CD and just continues (what appears) to boot from the HD.
When I changed the BOIS priority it came up with a
PXE-E61: Media test failure, check cable
So after reading this error message I've check the HD is installed and disabled the net card in the BIOS but still wont boot and reverts to the error message as above.
Any other ideas? Is the HD broke?
Why wont it boot from CD?
tia
Yuppski

Hi
It could be possible that CD/DVD drive cannot read the inserted disk and therefore tries to boot from the HDD.
Therefore I would recommend checking another bootable disk like Linux live CD or just simply another bootable Windows disk.
If the disk is OK, then the CD/DVD drive might be affected. I had an similar problem in the past where the CD/DVD drive could not read the inserted disk. In my case the laser lens was dirty. I cleaned it using cotton wool tip and alcohol and finally could start from the inserted disk

Toshiba Satellite L675D-S7104 wont start up

Looking for help! I was having problems with IE not responding so decided to upgrade to internet explorer 9 during process I needed to know if I had a 64 or 32 bit. So I minimized to check on my start menu and all my icons were gone. After pulling up internet again I looked around to find solutions someone suggested turning it off and manually starting in safe mode. Usually nothing comes up. Occasionally I get Windows boot manager which says "windows failed to start. A recent hardware or software change might be the cause." It wants me to insert my windows installation disc which I do not have. I once got an error message saying "An Error has occurred error:F3-F100-0003" Most of the time it is just a black screen with a blinking cursor dot. Interestingly after commandeering my sons computer I find the internet a lot faster than it was on my new Toshiba. My security was up and running and said there were no problems however my computer had been slow and not responding for a while a lot of times it wouldn't turn off so I had to put it to sleep now it sleeps eternally. Please help my son wants his computer back and I think I want mine back.

Satellite A305-S6852
Let's just try a basic system reset and see if this helps bring your system back. Power off your system, unplug everything including the AC, remove the battery, press and hold down the power on button for 30 seconds, replace battery and AC, power on, at the Toshiba logo press the 'F2' key to enter BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, then try to boot into Windows again.
Please let us know what happens. Good luck.
Mike

Satellite L675D-S7106 Wont start!

I was using the laptop earlier today and everything was working fine. I came back to use it a few hours later and it won't turn on. The cd drive still opens. You can hear it start to turn on and then it stops within about 3 seconds. I've tried unplugging with the battery out and pressing the power button and nothing happens. Help please!

Satellite L675D-S7106 Specifications
Satellite L675D-S7106 Downloads
Let's try a proper system reset one more time, and see if this brings your system back. Power off the laptop, unplug everything including the AC from the unit, remove the battery, press and hold down the power button for 30 seconds, replace the battery and AC, power on, if you see the Toshiba logo, press the 'F2' key to enter the BIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, and then try to boot into Windows.
If this doesn't work, try all the other methods here:
Computer will not turn on
Let us know what happens. Good luck.
Mike

Satellite A200-1ZF wont start - flashing power led

Hi,
today my Satellite A200-1ZF laptop wouldn't start, instead my power led blinks orange-orange-blue-orange-orange -blue and so on and so on.
The HDD led turns blues when I turn the computer on and seems to work fine (I can hear the normal running sound from the HDD).
I tried removing the RAM module to see if there's a fault in one of the modules, no help. I tried removing the battery and running it only on ac power, also no help.
Anyone got any idea?

Hi
Im a little bit confused.
If I understand you right your notebook starts but display is black or how to understand you?

Satellite Pro L40 wont start

When i turn on my Satellite Pro L40 it shows me a screen asking me to start windows repair or start windows normally.
When choosing either option it leads me back to the same screen.
Does anybody have any ideas?
Many thanks

Hi Will
For me it looks like the installed OS was muddled up for non apparent reason
If you are not able to boot in the Windows XP OS and if the repair option doesnt help to boot in the safe mode I dont see any other possibility as to boot from the Toshiba recovery CD and to reinstall the operating system again!
But note; the booting from the recovery CD will format the whole HDD and you will lose all files stored on the HDD. ?
This is a drastic procedure but in my eyes its the only one which could helps to solve this issue.
Greets

Satellite x205-sli1 wont start

Help. My x205-sli1 was working fine, and i just went to start it up and all i get is 3 beeps, the screen doesnt turn on and nothing else works. what is wrong with it?

Satellite X205-SLi1 Specifications
Satellite X205-SLi1 Downloads
First, there is no mention of the Toshiba Recovery procedures in the X205 Series User's Guide. So, it's safe to assume that this unit came out just before Toshiba started consistently putting recovery partitions on their HDDs. As a result, the F: partition on C: drive is unlikely to be the recovery partition, especially as the recovery partition would never have received a drive letter, and would not appear as an NTFS partition inside Windows.
You can still order a set of recovery disks though. As a number of Vista 32bit drivers and utilities will be retained after the upgrade, this is still worthwhile. See the bottom of this list to see the Vista 32bit drivers & utilities that are retained in Win7.
Next, given the model's specs, this unit can only handle a maximum of 4GB of RAM. So, there is essentially no benefit to installing Win7 64bit. Plus, you would have to do a clean/custom install to go from Vista 32bit to Win7 64bit, as you cannot use the upgrade method in this scenario. So, I would only upgrade to Win7 32bit. In fact, if you check the model's downloads page, you'll note there's a more complete set of drivers & utilities for Win7 32bit, than there is for the 64bit edition.
Regardless, you want to thorougly read, and follow the directions below, and use the software installer:
How To Manually Upgrade from Vista to Windows 7 - Satellite X205 (SLi)
Toshiba Software Installer for Windows 7
Please let us know how it turns out. Good luck.
Mike

Satellite P875-105 wont start

I bought this laptop P875-105 three weeks ago. Today i was working on it and all of a sudden it shut down. Now i want to start it but it doesnt do anything. the battery is full so that couldnt be the problem, any suggestions?

Hi
Try this:
Remove battery, disconnect the AC adaptor
Now press and hold the power button 30 sec long.
Put the battery and ac adaptor into the notebook and press power button once again.
Does it power up?
If not, visit your dealer and ask for a new notebook or get in contact with Toshiba service in your country.
Good luck

Satellite C855-S5194 wont start, black screen, fan pulses

I've seen many posts and youtube videos on this subject, but not with the specific symptoms mine is having. I've gone through various troubleshooting steps already so don't bother telling me to do a power reset or whatever its called. Here's the specifics: When trying to power on the laptop, the fan tries to start, but then pulses on and off with increasing intensity and then dies down and builds up again. Screen is black, power light is on. I removed the hard drive and same thing. Here's the strange part: There is a 4G RAM in slot A and 2G in slot B. If I remove the 2G from B and leave 4G in A then I get just a single beep, no fan. If I take out 4G from A and replace with 2G card, I get the single beep. This model is supposed to work with only slot A occupied. If I reverse them, 2G in A and 4G in B I get the same beep. It's only if 4G is in A and 2G is in B that it at least pulses the fan on and off. I thought it unlikely that it is the RAM and it's just due to another fault that this strange thing happens. So I stripped it down to get out the motherboard for inspection. I found a suspect looking solder joint next to where the battery connects, there is a double-pin solder joint that looked like a cold joint, so I resoldered it and put back together. It basically still does the same thing except the fan does not pulse as quickly just one pulse about every 10-15 seconds, so it seems I changed something. Anyway, I'm at the conclusion that I need a motherboard reflow, unless it is the CPU which I wouldn't know how to test. One other thing I noticed when I took it apart was the CPU appeared to have way too much thermal compuound on it [from what I read] It looks like they just blobbed a whole bunch on top and the heat sink squeezed it out all over. Just wondering if that may have been the cause of overheating that damaged the motherboard or perhaps both RAM cards? That RAM symptom seems odd. I didn't feel like ordering new RAM when it didn't seem likely to be the problem, now I'm second guessing. So does it seem like motherboard or RAM... or the CPU?
Solved!
Go to Solution.

PROBLEM SOLVED!
OK, so the motherboard reflow didn't work.
I found another motherboard online for $130 and that worked.
I think I'm going to get a cooling pad now in case overheating was the problem.

Satellite P305-S8996E wont start and shows Toshiba starts screen only

Hi guys, i have a problem,
when I turn on my laptop appear to me the start screen toshiba but thats all, still shows only start screen from Toshiba.
From the right side in front of a laptop keyboard from inside i still hear a weak repetitive sounds as if there was something jammed or something is not working properly.
I want to ask if you do not know what the problem is.
Thank u for help
Seal (Slovakia)

Any news seal?
Did get the notebook working?
You should be able to access the BIOS even if the HDD is faulty.
In case the HDD malfunction, the BIOS should not recognize the HDD and the HDD details should not be listed in BIOS settings (first BIOS page)
In case the HDD is OK, you should test the RAM modules because faulty RAM module (one or both) would prevent the notebook from booting up.

Satellite T110-11U wont start up

Similar Messages

Maybe you are looking for