Satellite T110-12T - Creating recovery media

I have recently purchased a refurbished Toshiba Satelite T110-12T and am in the midst of creating some recovery media on 2 x DVD. It is now approahing 2 hours and the gas gauge is still at approx 50% of first disc!
Can someone please advise me if this is normal or should I abort and re-start? What is your experience of the time taken?

Hi Xardas
Thanks for the advice. I am using Sony DVD-R discs in an external CnM drive so I would have thought that they were ok. In the end I cancelled after about 3 hours at 50% of first disc.
I may try again with my Sony discs, otherwise I will get some Verbatim or TDK ones as you suggest.
I think there was the option for using a USB stick but I don't have one with enough capacity, I'll have to buy one if I don't succeed with DVDs!
I will let you know how I get on. Thanks again.

Similar Messages

Satellite T230D fails to create recovery media

I have a Satellite T230D running Windows 7 Home Premium. When attempting to create recovery media using a USB drive, the process starts by advising that the USB drive will be formatted.
At this point it fails with the error code 040EAE-57-00000000. The USB drive is left in an unusable state and cannot be reformatted by Windows.
The HP USB Format utility does manage to reformat the USB drive.
Before starting to create the recovery media application I disabled virus control, the firewall and Internet access to ensure that nothing got in the way. I have tried this twice with the same result both times.

Hey mate,
Very interesting. I have the same model and I also created the USB recovery medium but at the end it was no problem for me. I also got an error message during creating the medium so I tried another USB stick. Before that I formatted the USB stick with default settings. So I started creating the recovery medium and this was done successfully with the second (other) USB stick so no problems at all.
I have used 8GB USB stick from CN Memory, model Spaceloop XL. What USB stick you are using?
By the way: I would recommend verifying the medium after creating (just mark this option in recovery media creator). That means the files on USB stick will be checked if they were copied properly or not. This could be important if your notebook doesnt start anymore.

Create Recovery Media crashes on Windows 7 SP1 and Rescue and Recovery 4.51.0045.00

I installed Rescue and Recovery 4.51.0045.00 right after a fresh installation of Windows 7 Home Premium SP1 (Build 7601 64 bit) on my Thinkpad Edge 11. After hitting "Advanced Rescue and Recovery" and then "Create Rescue Media" I get a "Create Recover Media has stopped working" error with the problem Signature:
Problem Event Name: APPCRASH
Application Name: RRMedia.exe
Application Version: 4.51.27.0
Application Timestamp: 513d7dbd
Fault Module Name: RRMedia.exe
Fault Module Version: 4.51.27.0
Fault Module Timestamp: 513d7dbd
Exception Code: c0000005
Exception Offset: 00004451
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 3d61
Additional Information 2: 3d617f89c03aec75ed4c33477fb666c5
Additional Information 3: 62ba
Additional Information 4: 62ba33999ddd637bc95b614e6779b3ea
Uninstalling and then reinstalling Rescue and Recovery doesn't work - I still get the same error when trying to create recovery media.
Any tips would be greatly appreciated.

Hi Customer,
We have below workaround for fixing your issue, would you please try and feedback result to me?Thanks.
delete the below registrykey :
"spilock"="1382411866.78"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lenovo\spi\RNR Boot Media]
"spilock"="1382411866.78"

Creating Recovery Media with Portable External Hard Drive

Is it possible to create recovery data with a portable external hard drive?

Hi,
i am also facing the same problem not able to create the recovery media in external hard disk. win 7 64 bit..
Please help there is an option to create recovery media in USB flash drive but its not recognising the usb even though its connected.
Mahesh

Create Recovery Media low disk space on C error

Hey everyone,
When I tried to create a recovery disc on my X301 Windows 7 to free up the partition, I got an error saying "No enough temporary disk space in C drive, Create Recovery Media will exit now." How much space do I need to free up on my C drive? I only have about 7.5 gb free on my 64gb SSD.
Thanks for your help!

You'll want at least 10 GB free before doing anything. As is, you can look at your recovery partition to see exactly how much you'll need, but Windows will always block off extra for some reason.

Cannot Create Recovery Media in Windows 7 Pro for x120e

You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
HI all. First, I have read "Creating Recovery Media in Windows 7" at http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74040.
I get this message when attempting:
You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
What happened is that I blindly copied the recovery files to a USB and just copied to a folder on my desktop XP machine. So now my X120e is saying, sorry, you can't do that again. You already did it blockhead!
So how the heck do I undo this so I can create appropriate recovery media? System restore rollback? Registry key editing? Here are the files on my XP, I have no idea if I create Windows 7 pro recovery files from these.
Thanks all for any suggestions or known fixes,
chadnc
Root folder files & folders:
winRE.wim
usb.tag
Folder\factoryrecovery
Folder\Boot
Inside of Folder\factoryrecovery
sdrivebackup2.wim
cdrivebackup.swm
cdrivebackup2.swm
cdrivebackup3.swm
cdrivebackup4.swm
bcdinfo
RECOVERY
service_done
Inside of Folder\Boot
24 subfolders, starting with cs-CZ
BCD
boot.sdi
memtest
tag

Hi chadnc
Have a look at the first bit of the post by The_Solutor in this thread :Making a usb stick with the Lenovo recovery partition bootable maybe that will help.
Like many things Microsoft, the "you can only burn recovery media once" limitation just inconveniences the honest users, but doesn't slow down the bad guys. Oh well....
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Yoga 13 doesn't have an option to create recovery media in onekey recovery

Hi All,
I am prepping a new Lenovo Yoga 13 for a user. I want to create recovery DVD(s) for the new system with the OneKey Recovery software. When I open the application there is no option to create media. There are only a backup option and a restore option. I called tech support and they advised if I attach a DVD drive the option to create media will appear. I did this but no luck..... I am attaching first a picture of what I see when I open One Key Recovery
And secondly to show that I do have a usb DVD connected here is a picture of the DVD attached with a blank DVD inside it.
I have downloaded the lastest update to the One Key Utility and am running version: 8.0.0.1519. Can anyone give any insight as to why the create recovery media isn't there for me?.....
Solved!
Go to Solution.

I found the answer to my own question. Essentially in version 8 there is no way to create recovery media with this utility. I came across the following link which I am going to try:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

Why only once for create recovery media???

When I created recovery discs for my laptop using HP Recovery Manager, I got the message:
You can only create recovery media once for your system. So ensure that you keep it in a safe place
why only once?? what is the problem with creating the same discs again?
what is the difference when creating the recovery discs with the Backup and Restore utils in Windows 7? is it also once only? what is the difference between discs created with Windows 7 versus HP Recovery Manager?

I believe it is due to MS license agreement that only 1 set is allowed. You can of course use a CD/DVD burning program to copy the set you made.
The Recovery set you burn restores the laptop back to factory shipped state. Recovery made with Win 7 utility is an image of the hdd that includes added programs, data ,photos,etc.You also need to burn the System repair disc to use with the backup. You can use it as often as you like.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

ThinkPad Twist s230u and ThinkPad x201 Tablet Creating Recovery Media

Hi Lenovo Customer Support,
ThinkPad s230u( model number: 3347CTO) - Window 8 Pro.
Before I start using my Laptop, I want to create a Recovery Media as is shown when installed with all partitions. Meaning if I format all contents of Laptop I want a recovery Media brings back computer as I go it in the first place include all partitions. By default there are five hidden partition and one ntfs.
What is the procedure how to Create a Recovery Media? I heard only Flash Recovery exist for Window 8.
Also I have Window 8 Pro but when I tried this link procedure http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Create-Win-8-recovery-media-in-ThinkPad-Thi... I saw only Window 8 option and even then it reboot and did not work.
Also I did Flash Recovery and Took Faster with USB 3.0 Flash around 10 min around 16GB Space
Is it possible to do CD Recovery too ?
ThinkPad x201 Tablet(Model Number: 30933PG) - Wundow 7 Pro
Can you do Flash Recovery Media and CD Recovery Media under Window 7 Pro Enviro.
If you upgrade Hard drive to 1T and RAM to 16 G RAM , Can you Still do the Recovery Media?
What is the Procedure to successfully create Recovery Media.
Thanks.
saad

Reasons am asking this questions:
Sometime you test your computer doing a lot of things learning new technologies etc and suddenly you decide ok I want to take it back to factory state. Until now, most Thinkpad laptop does not come with recovery media. So how can I assure that my Recovery Media includes everything I used to have when I first receive unit.
I want to learn how to do that by myself by learning from the experts.
Until now what I know as follow:
ThinkPad x201:
I tried recovery media 3 DVD only with original hard drive works. I did not try Flash and not sure there is option yet.
If I upgrade unit with 1T hard drive and 16G Ram, How can I do Recovery Media?
ThinkPad Twist s230u:
I tried Flash and followed procedure on link in previous post. I took me less than 15 min to recovery whole. The question is does this process recover all the parts that is included when I receive unit.
I was unable to do recovery since I am not sure when in the Flash and during process showed to choose operating system was only Window 8 option not Window 8 Pro which came with unit.
I was able to do reset within system took longer and worked.
Is the recovery part build-in in the hardware or software partition? Is it included in the recovery Flash with all partitions?
Thank You. Awaiting for anyone to reply.
saad

Create Recovery Media Windows 8 without USB drive

Hi,
I recently bought a T530 with Windows 8 pre-installed. I want to create recovery disc(s). However, in the "Create a recovery media" wizard, I don't have the option of selecting DVDs if tick the option "Copy the recovery partition to the media". I have a bunch of DVDs lying around and I would like to use them. Not to mention that I don't intend to buy USB drive just for this purpose.
Any help is appreciated.
Thank you,
Solved!
Go to Solution.

Hi egrivel,
As stated above, there is no option to create optical recovery media. You can use a flash drive. 8G 16G I believe, but verify that when running the utility. Make sure "copy the recovery partition" is checked.
Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
Z.
[edit] 16G flash drive size.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Cannot Create Recovery Media - USB

Hi, I have a Toshiba P875, Windows 8. Tried creating recovery media on a brand new Transcend 16GB USB 3.0 flash drive. I get the error code 'Format failed! (Error Code: 040E87-0A-000000000) What could be the issue? Couldn't find any answer on the forum. Disabled Anti-virus but still did not help. Any help will be appreciated. Thanks, Anand
Solved!
Go to Solution.

Here’s how I got my Toshiba to create recovery media on a USB drive that gave the following message:
'Format failed!
It appears that Recovery Media Creator recognizes some USB drives as having two partitions even though one only shows up under windows. I tried 2 different USB drives the first was a Team Group 16G USB 3.0 thumb drive and the second was a Kingston Datatraveler 16g 3.0 USB thumb drive. Recover Media Creator work flawlessly with the Kingston drive and gave me the error with the Team Group drive. I tried formatting the drive with windows which didn’t help. I downloaded HP USB Disk Storage Format Tool located on the cnet website and formatted the Team Group drive (run as administrator). After that it also worked flawlessly. So my advice to anyone who gets the “Format failed” message with Recovery Media Creator is either try using a different thumb drive or download HP’s format tool and let it format the USB drive.
http://download.cnet.com/HP-USB-Disk-Storage-Format-Tool/3000-2094_4-10974082.html

Cannot create recovery media on T61

Hi, two days ago I got my Lenovo Thinkpad T61 with Vista Business. I decided to downgrade to Win XP, so I found out, that I need to create a recovery media. I looked to Start > Programs > Thinkvantage, but there was no such option as create recovery media. So I was googling and I figured out that I didn't have installed Rescue and Recovery software. I downloaded (English) Rescue and Recovery 4.21 for Windows Vista from Lenovo webpage and installed it. Then I went again to Start > Programs > Thinkvantage and there was the option Create Recovery media. I clicked there, but there was only option to create Rescue media. Here is the screenshot :
http://img38.imageshack.us/img38/4570/97770442.jpg
Also I was trying to find if I have that hidden partition. In windows I found some 513MB partition, but there was 100% free space.
http://img27.imageshack.us/img27/4834/20885840.jpg
In linux I found only one partition, where is installed windows. Is there any way that I don't have this hidden partition, so I cannot create recovery media, or where is the problem? Thanks in advance.

If it is the official Lenovo downgrade discs, it is actually a XP pro recovery media, so you don't need the Vista OS to work. It will create its own recovery partition on your hdd. But once you done it, there is no way of going back to VIsta, unless you image the hdd using a third party software like Acronis TrueImage (need to be purchased) or Easeus Disk Copy (free).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Creating recovery media error

Hi,
Happy owner of a t530 system. Unfortunately did the old mistake: upon starting to use the laptop i had not create recovery media. Quite soon the system collapsed and the only way to use it again was to use another recovery disk set (12 something CDs) made from another t530 purchased at the same time. After recovery every thing worked fine system is up with q and s partitions. Recently i decided to install an msata sdd drive to migrate the os there. Byut before the process i remembered to make recovery media. Started the thinkvantage create recovery media. However it allows to make boot media only but not both boot and data media. Checked partiton q and there 12 or something individual swim file. Googled for help but non was successful. Any idea? Thanks

Good day.
I sorted out the "missing" posts, and removed the extra one.
Thanks for your patience.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Folio 13-2000 unable to create recovery media due to known SSD corruption bug

My folio has been freezing and periodically showing the 'no boot drive' message. I tracked it down to the critical Softpaq sp60976. I tried to create recovery media (USB flash drive), but it fails at about 19% completion and says it cannot continue. The SSD firmware update requires a secure wipe of the drive, but I won't have anything to put back on it.
My computer is out of warranty by a year. Is there really no recovery media, even for purchase, from HP? I'll take DVD, as I can attach an external DVD drive.
This question was solved.
View Solution.

Phone your nearest HP Support to order Recovery Media. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

W540, Windows 8: Unable to create recovery media

Hello,
today I received my new worklaptop, a W540 with Windows 8 installed.
The first think I wanted to do was to create recovery media (I'm going to re-install on a SSD). However, trying to run the Windows 8 "Create recovery media" tool, as sugested by Lenovo, results in the following:
The option "Copy the recovery partition ..." is grayed out, and I can not select it. Pressing Next results in the following:
What am I doing wrong ?
Thank you.
Solved!
Go to Solution.

You should be able to order recovery media from support. They usually charge for the media but in this case they may not. I can't speak for them - you'll have call and see how it goes...
Z.
Finland
THINK-branded products
Finnish
+358-800-1-4260+358-800-1-4260
(Warranty service and support)
8 AM - 5PM
Monday - Friday
IdeaPad and
B, C, E, G, K, N, V, Y Series Notebooks
Finnish
+358-800-9-4439+358-800-9-4439
9AM - 6PM
Monday - Friday
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satellite T110-12T - Creating recovery media

Similar Messages

Maybe you are looking for