Satellite T130 -Black screen- HDMI works perfectly

The problem started as a HDMI-cable was plugged into my running Satellite T130-17E and the screen was closed down. From that point the notebook screen stopped working. When booting the windows start-up logo is on for a couple of seconds and just before the entering the desktop the cursor is visible on the screen. But except from these short moments there is no action on the notebooks screen. When I reinstalled the driver to the graphic card there was some short moments (less than 0,5 sec) when the screen was active.
I can use the notebook without any problems via HDMI to my TV. And when I adjust the screens brightness (FN+F6/F7) the black screen can get more back-lighted.
When I turn off the HDMI-output or plugs it out - nothing happens on the notebooks screen.
Can some of you please try to help me out as I really need my notebook to work normal again. If you can help me sort out this problem I'll be very grateful-
Kind Regards,
Jacob Lindberg

When I use FN+F5 to use LCD only - there is a very short moment when i can see the dekstop on the notebook screen, but then it turns black again.
When I try to duplicate the output on HDMI and on the notebook screen - the notebook black is very backlighted when compared to the notebook screen when only the HDMI-output is used. When I switch between the different options on FN+F5 there is som very short moments when some the the notebook screen is active - but it is like a millisecond.
Is there any thing else I can do?
Message was edited by: Lindberg

Similar Messages

Black screen while working

last few days my mac got a black screen while working once ort twice a day. no idea why. it's only the screen and there is no way to wake him up. but the cpu didn't shut down and it sounds like he is working correctly. any idea? would make me happy!

Hey enderci,
Thanks for using Apple Support Communities.
If you are not getting video, this articl has as section for no video that should help.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573#1
Have a nice day,
Mario

Satellite P505 black screen only on startup

I know there are a lot of black screen posts but I cannot find anything with quite the same problem we are facing. We have a satellite P505-S8980 that only has trouble booting after it has been turned off for the night (or at least a good few hours). No problems with sleep, hibernate etc.
The system boots, we see the Toshiba screen, but where the login screen should be is a black screen with no cursor. An external screen plugged in shows the login screen. After 3 or 4 restarts the screen works as normal.
Have tested the memory and the hard drive extensively and they also work perfectly in another P505. Any advice would be very much appreciated, the machine is great apart from this new problem.
Thanks for your time.

Thanks Peter for your reply, I have been through both of those links before without any luck.
We have done a complete factory restore on this computer, tried the bios reset and all other listed suggestions. There doesn't seem to be any error associated with this, as windows actually starts, then the screen goes black at the user login page.

Satellite L300D - Black Screen on start-up

Hi Guys, I need some help please. On Thursday I was on my computer and noticed the time was wrong I thought I must of done something wrong and was going to fix it. I went to restart my computer but it wouldnt boot just had a black screen. I knew I hadnt damaged the screen. After a bit of googling I read about taking the battery out and plugging the charger in and low and behold it worked!
On Friday I charged my battery up for an hour and put it in the computer and that worked too so I thought the problem was solved.
Unfortunately today my computer will not start at all with or without the battery in still get the black screen. The fan is going but apart from that its very quiet. I tried putting the cd in to see if that would do anything but it didnt.
Any suggestions please?

When I first got theToshiba Satellite, it came with Vista. It was UNUSABLE! I mean that I would have to restart it by removing the battery and disconnecting all power every couple of hours.
Toshiba wouldn't help me and microsoft would not help me.
They both blamed each other. So after paying over $700.00 I was disappointed.
After a year of struggling, I found the drivers for windows XP and installed Windows XP. The laptop was suddenly fast and it worked.
I don't like how hot it gets and the noisy fan on most of the time. A friend has a LENOVO laptop that works very good, and is very quiet.
I doubt that I would ever buy another TOSHIBA again, mostly because they did not support me when the laptop was unusable right out of the box.
Also 3 years is too short a period of time for the 4700.00 Laptop to go in the landfill!
Pathetic.

Satellite M70 - Black screen after recovery installation

So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
I do not know what to do now to make my laptop work again. Please help.

Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
Which installations mode you have used: standard mode or expert mode?
Try to install it again.
As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

Satellite A200 - Black Screen Of Death

Hi All,
I have a Satellite A200 model PSAFCA- 01K00J. This model I bought from Harvey Norman in Australia but I can find no listing on the Toshiba web site as either current or discontinued. That sux as I am looking to get any bios updates available to try and rectify a recent black screen issue.
The first time this occured I was able to re-start after removing the battery/disconnect power several times before it came good. The next day after a re-start attempt to install anti-virus updates same problem... disconnected power, removed battery, removed ram (replacing ram one then the other to check for faulty ram cards) and hard drive then bled off residual power with start button. Went through this proccess multiple times before eventually successfull. I have had to go through this a couple of times since after automatic re-starts for windows updates, etc. I have sourced the procedure for manually resetting the bios by jumping it but that is something I want to avoid doing until I have exhausted all other options.
Toshiba Satellite A200
Model- PSAFCA- 01K00J
O/S- Vista
Hard Drive- 160GB with 50GB free space remaining.
System 32 with duo core proccesors.(intel)
Bios Version/Date- phoenix technology's ltd 5.20, 25/10/2007
SMBIOS Version- 2.4
Any idea's on sourcing the latest correct bios or any other input would be gratefully appreciated... :)

Hi Timox, when I turn on at the start button the lap top displays (lights up) the satellite logo and the small display at the bottom front (power on/battery connected and charging displays) and you can hear the extraction fan running as normal but there is just a black screen. I have tried to set up an external monitor... the only time that worked was when I was pressing f8 to go for a system repair/restore but the restore made no difference. Other than that the external monitor shows the same black screen as the lap top.
Given that the bios controls the start up I would have assumed that would be the logical place to look (haven't tried the f2/escape deal yet) so curious as to whats leading you away from the bios ?
I am trying to get to the bottom of this by process of elimination so if you have any other tricks I can try first I would love to hear them... thanks in advance :)
Found a link for an old review of this model... Yet Toshiba doesn't list it for updates (grumble)
http://www.pcworld.idg.com.au/review/toshiba/satellite_a200_psafca-01k009j/218566/
Message was edited by: dustyminer

Satellite L750D - Black screen with sound in media players

Hi,
I have a Toshiba Satellite L750D and running Windows 7. When I play a video file (any format) windows media player opens and starts to play but I only get sound, no picture its a black screen. I tried 2 other media players (VLC and Power DVD) and the same thing happens.
Can anyone help?
I've searched online but nothing has helped so far.
Thanks.

Thanks PauPau for your reply.
I have seen this fix in another online forum, however when i open Options in WMP, there is no Advanced button on the performance tab. I have been unable to locate any options for the Video Accelaration, and no options for 'overlays'.
This problem is not just with WMP, i've tried other players and get the same problem. When WMP is open on the video file, i can see the thumb nails with a picture of the video, but when i open them the picture is black but sound is ok. This is the same for the other media players as well.
Another suggestion i read was to turn off WMP in windows programs, then reboot and then turn WMP back on. This didn't work either. I have also checked the driver and there is no yellow flag on this to say there is a problem.
My last option at this point is to resotre back to factory settings, but i'll use this as a last resort.
Your suggestions are appreciated.

Satellite c670 black screen

I have a Satellite c670 that's a year and half old. I just used it and slammed the lid shut..not that hard but hard enough that when I opened it back up there was a dreaded black screen, no curser ..nothing. When I shut the lid I was transferring photos to my laptop, so that's the only thing that was in my computer at the time a 8gb memory card. Nothing was in the cd drive. I was plugged in to the wall. I got it to the point where I'm at the windows boot manager screen and it's keeps saying:
Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and the restart your computer.
If you continue to receive this error message, contact the hardware manufacturer.
status: Oxc00000e9
Info: an unexpected I/O error has occurred.
I have tried everything to make this work. I made sure the hard drive was in tightly (it was). I check the memory and that was in tight and I also checked the CD-ROM and that was in securely. I have tried turning it off with out the battery, I turned it on and off with the ESC button. I have tried everything that I can and now I'm looking for major help. I have everything on my computer for university and no I haven't back it up in a long while...booo to me! Someone please help!!!! Thanks

remove the sd card and anything else connected to the laptop. do a power reset. remove battery and unplug the charger, then hold down the start button for 10 sec. reinstall battery and connect charger. start up computer and spam (continuously hit) the f8 key. if lucky, you will be presented with the option to boot into safe mode. select and let it boot up. when done, do a normal shutdown. then, try to do a nornal boot up. post back results.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

HT5429 iOS 6 Maps not loading on Hybrid or Satellite. Black Screen.

Maps only loading on the default setting. Just a black screen, not loading at all. The current location is displayed but that's it. What's wrong?

I had slightly similar issue: I couldn't see any streets on any of the maps (standard, hybrid, or satellite). But my location services were on and I could see the pins for current location and destination, and even different routes I could take. But no streets! Just a blank grid! Finally, I did a hard reset (press home and power button at same time) and that did the trick! Everything is working fine now!

Tx2000 black screen but work 2nd monitor

Hi
i have a HP tx2000 and when i switch on,the screen come black.
i connected to a 22" monitor and i can use the laptop.
is funny because the touch screen still work ,i can se working in my 2nd monitor!!!
can somebody tell me what to do please?
i tried Fn+F4 and doesn't work
the computer didnt have OS ,i had to install windows from my 2nd monitor
kind regards
Isma

In win7 there is a shortcut to alter the display (WINKEY+P). Try use this. If not work, maybe a problem with the cable of the notebook display.

Black screen nothing working

my ipod touch was hot at the bottom rear when i picked it up. for no reason. the display worked ok but didnt let me slide to unlock or slide to switch off. i have since fully charged it, fully discharged it several times and the screen remains black no matter which buttons i press. i have tried the reset by pressing top and bottom button for 10 seconds still nothing happening. It is now not recognised by the computer when i switch it on. or the tone from the computer when the usb is connected. iv not dropped or damaged the ipod in any way. any help here would be appreciated. thanks in advance, kevin

I agree, the black screen with 3beep error is a very common problem and the only solution is a replacement board. I suggest you read some of the other topics in this forum on the subject, many have good and useful info in them and there is also a lot of misinformation out there too, as well as an abundance of improperly repaired boards, so it's best to educate yourself before looking into repair options.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Satellite L300 - Black screen and flashing cursor in top left corner

11 July 2010
My computer bought 7 March 2009.
I am not sure if there is a voltage issue, but there is certainly a heat issue and has been since I bought it, almost constantly overheating. For circa 2 months it has become increasingly slower to load to desktop. For circa 1 month the operating system became stuck in a reboot cycle - rebooting over and over instead of starting up normally.
On 11 July 2010, the Windows XP operating system would not boot. Switched on to black screen, flashing cursor in top left corner. The computer does not have a Windows Startup Disk and will not boot into: -
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (most recent settings that worked)
Start Windows Normally
System Restore - will not provide access.
Recovery Console - the Windows XP CD will boot and provided access to the tool called Recovery Console. Procedures carried out: -
Fix a corrupt Boot.ini - YES
Fix a corrupt partition boot sector - YES
Fix a corrupt master boot record - NO
I have pressed F2, F8, F10 and F12.

Hello
It seems that something has muddled up your Windows installation and so the computer cant boot anymore.
In this case you have only one option and thats reinstalling Windows. Therefore you can take a Microsoft Windows XP disk or (better) Toshiba recovery disk. It will restore factory settings and your computer is read to use again.
Check this!!!

IPhone 6 black screen but works

After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
Any Suggestions?
Many thanks
iPhone 6 running the latest iOS

IIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty.

Satellite L750 black screen on start up!

After using my new Laptop for three weeks (and only for 3 hours per day) suddenly one morning I pressed the start button and the only thing I got was a black screen with nothing else .No cursor , no sound , nothing at all , only black screen. Please I need help

I have the same problem with this Satellite L645-S4102. No Toshiba splash logo on startup. Just a black screen. There were BSOD problems before I got this laptop but I can't even get the laptop to bootup to even try and repair it. The laptop is out of warranty. On startup, it checks for usb bootable or DVD bootable disc (lights come on, but that's it). any help would be greatly appreciated. I tried taking out the batteries and leaving it for over an hour, held the power button to drain any static electricity, then put the lithium battery and laptop battery in and still get the same results.

Satellite P750 - black screen, freezing, crashes while gaming

Hi, I've had my P750 not for long and i am getting a few issues with games.
Most of the newest games like NFS RUN, BF3 or FEAR 3,show a black screen in game, freeze and then crash will i play the game (2-10 minutes).
Other games like BLACK OPS, ASSASINS CREED REVELATIONS and SAINTS ROW THE THIRD, freeze and i have to press ctrl + alt + del. to continue the game again.......im really dissapointed by Toshiba, because although i was told that this laptop was suitable for gaming, instead i only get crashes!
I havent overclocked it, the NVIDIA drivers are the latest (285.62) same as DirectX
Ive seen similar posts on this forum, but no serious solutions. Please help!!

On Toshiba European driver page you can find the nVida driver v 267.44
Did you test this driver?
I found also some modified drivers on laptopvideo2go.com page but the usage of such drivers is your own risk and not sure if they would work properly.

Satellite T130 -Black screen- HDMI works perfectly

Similar Messages

Maybe you are looking for