Satellite U200-161 Fingerprint software not working with IE7

Seems like the fingerprint facility for registering passwords is no longer working once ie7 (final) is installed.
Anyone else have this problem or is it just me?
Thanks
Nick

Hi
I have never ever used the Fingerprint utility but possibly you have to set the user settings in the finger print software management again.
I think if you have updated the IE to version 7 so you have to refresh the settings in the Fingerprint utility.
Im not sure if it will help you but you can try it and please give me a result.
bye

Similar Messages

  • HP Scan 3 software not working with MacOS 10.9 Mavericks

    I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks.  Now my HP Scan 3 software does not work and there is no update for this software that I can find.  Can anyone help getting updated HP scanning software to use with Mavericks.  Thank you.

    Thanks for your reply.  I tried what you suggestsed and it did not work.  My printer was listed.  The website says it is for MacOS 10.8 and Mavericks is 10.9.  My printer prints fine.  The problem is with the HP Scan 3 software.  When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS.  Also, I went to the firm ware updater in my HP utilities folder and trie to run that.  I got a message saying that there is no update for my device.
    It is hard to believe that HP has not updated the scan software to work with Mavericks.

  • Satellite U200-122: Fingerprint Software doesn't work correctly with Firefox

    When I first installed Firefox on my U200-122, everything worked fine. LogIn on different sites by fingerprint was no problem.
    After an firefox update the problems began. Instead of filling in my username and pw, Fingerprint software popups and asks whether I'd like to register the site (which I did long before).
    In Fingerprint setup FF 2.0.0.6 ist correctly installed. If I remove FF from this setup, exit, restart setup and re-enter FF, it all works fine....until next reboot. I tried to install the latest version of fingerprint software - didn't help.
    Any ideas ?
    Thanks.,
    markus

    There is no solution like Fingerprint Utility update or something like that!!
    The solution is that you have to remove and to reinstall the Firefox again to get it working with the Fingerprint utility!!!
    The Firefox update damages the Fingerprint registration in the FF and therefore the new reinstallation is necessary!
    If you want to know how this will be fixed in the FireFox browser please contact the Mozilla support or the developer!!

  • T61 Installed XP SP3 - Fingerprint software not working.

    Hi. I just installed XP pro SP3 i got from MSDN. I nlite'd it, and everything was nice until i installed thinkvantage fingerprint software.. It bugs the startup! When i type my password for login to windows it takes 3 minutes to get to the desktop. (without fingerprint software it took 5 seconds) In task manager "Winlogon.exe" takes up 50% cpu and alot of memory. Shutdown is also incridible slow. I uninstalled the fingerprint software and everything was back to normal. I then tried installing xp without ripping stuff from it with nlite, but i still got the same problem. So what do i do about it? Thanks!
    EDIT:
    Btw. the fingerprintsoftware doesnt work... It cannot display the fingerprint controlcenter.
    Message Edited by fat-tony on 05-10-2008 04:49 AM
    Message Edited by fat-tony on 05-11-2008 03:35 AM

    I can only confirm parts of the thread-owner's post.
    I have setup a localized version of Windows XP Professional SP3 (slipstream) and the fingerprint software (v.5.6.2) works fine as regards the logon - no delays of any kind (I am using an administrator account).
    However I cannot access "Fingerprints" and "Settings" from the control center's main screen. The links remain black when hovered over. The "Tutorial" link turns blue when hovered over and clicking it will open the tutorial. I can manually open the fingerprint enrollment by clicking its own start-menu-item or by executing enrollbtn.exe from within the fingerprint software's program folder.
    But how can I access the settings if not from the control center? And is any explanation available for the inactivation of the two item's on the control center' main screen?
    UPDATE: Solved. The fingerprint software is making use of Internet Explorer (the xml files, probably) and choking on restrictive internet settings.
    Message Edited by customer_ger on 05-11-2008 08:42 PM

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • T43-W7 (new install) Fingerprint Software not interfacing with power-on password

    Went through a remarkably painless upgrade of my old T-43 to W7 yesterday.  After the W7 install, I added the Lenovo Toolkit, and let it load the recommended drivers/updates.  Then to regain use of the fingerprint function, I d/l'd the latest version of CSS, which seemed to install just fine (per upgrade recommendations, I uninstalled the fingerprints/power-on password prior to upgrade).  
    In going through the enrollment process, the only checkboxes that appear above each "finger" are for Windows, not for the power-on password.  The power-on password isenabled and set in BIOS for both the computer and the hard drive (password identical to the Windows User password).  Tried with the Security Chip both Enabled and Disabled, and also tried "Clearing" the security Chip, to no avail. 
    The result so far is that fingerprint login is working great for W7, but no longer works at all for power on, as it did under W2k.  I have an X301 that I upgraded from Vista to W7 on which all of this works perfectly, so I am pretty sure I know what should be possible, but maybe this is beyond the hardware function of W7 with the T43? Am I missing something? 

    Vince69,
    Thank you again for your suggestion.  I tried updating the driver using the package you pointed to, and did not have any luck.  Kept getting "Driver not found", (and include subdirs was checked).  Also tried manually dropping into each subir in the file, and still no luck.
    I came across an entry in http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/aa965e55-de21-4dd0-93e2-05e6d14... which seems to address the "Unkown Device" issue.  Go about halfway down the page, and the instructions provided by James Norman seemed to work for me--at least it made the error message go away.
    But the original problem of the Fingerprint s/w interfacing with power-on password is still there.  After fixing the device driver problem, I reinstalled Fingerprint Software (I had uninstalled it before fixing the Device Driver issue), and I have the same behavior and selection choices under "Settings" as I had before--none of the settings include anything to do with power-on password.
    Any more suggestions?

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • Apple scanner software not working with HP

    HP claims that the Apple Scanner Software on PowerBook is not working properly with the HP scanner

    Is this a question about the scanning software in the MacBook Pro computer shown
    in your post's lower boundary area, or do you have a PowerPC G4 PowerBook, too?
    There may be a newer or alternative driver for a recent version of OS X, that the
    older obsoleted PowerBook can't run; but a later supported MacBook Pro, can.
    Issues with Apple products, software or hardware that may elicit comment,
    can be addressed to Apple Feedback... in case you want to tell them direct.
    Mac OS X - Feedback
    If you have posted in the vintage/obsolete PowerBook notebook ASC discussion,
    by accident, Hosts could relocate this thread to one more appropriate, on request.
    You may have to look into alternative drivers or software for scanners, if whatever
    Mac you are using with the HP scanner is unsuitable. The older PPC based Macs
    can't run an OS X version past Leopard 10.5.8. With a later MacBook Pro running
    Mavericks OS X 10.9.4, you may have difficulty if HP does not support it...
    Drivers for current printers & some scanners may be included in Mavericks; but
    for users of older printer/scanner/copier all-in-ones, bits may be left behind. If
    the HP product is older, a different version HP scanner driver may work. There
    are a few open source drivers available, however I do not recollect the web site.
    Please make clear what version HP product, which Apple computer portable, and
    what OS X version, your discussion actually pertain to. Some users refer to a
    MacBook/Pro as a PowerBook; and for a time, a MacBook as an iBook. Oh well.
    {edited & re-posted -- after accidental reference to an unreleased software version}
    Good luck & happy computing!

  • MSGTAG Software not working with K8N Neo LAN Port

    Greetings All,
    I'm having a problem using a message receipt service called MSGTAG (http://www.msgtag.com) It works with Microsoft Outlook and while it still uses Port 25 for the SMTP server, it also creates Port number 7362 to "listen" for when the recipient opens the e-mail and sends a receipt back to the originator.  This service will not get past the LAN port on the K8N Neo Platinum board.  Outlook just hangs until an error message pops up saying a connection to the smtp server was interrupted.  I thought it might be the nVIDIA firewall software, so after opening up to correct ports, it still won't work.  I then uninstalled the firewall all togther, but still no luck.
    I'm running all the latest MSI and nVIDIA drivers.
    I should note  that as soon as I enable my PCI NIC and use that, everything is fine.
    Anyone have a suggestion?  MSGTAG tech support wasn't much help.
    Much appreciated.

    Looks like I finally figured it out.  In the nVIDIA ForceWare interface under Ethernet Settings---->Advanced Configuration--->Checksum Offload, uncheck the box that says "TCP Transmit Checksum Offload" and hit "Apply" and now it works!
    I have the overall Firewall set to "High" profile, and now the only two websites that don't come up at all are http://www.extremetech.com and http://www.netflix.com .  I've seen postings in here before about Netflix.  Does anyone has an easy answer as to what source code these two websites have in common that would make this firewall block them?
    The only firewall setting I can find so far that allows them to load is "Off".  I could drop it each time I guess, but there has to be another way.
    Thanks for any help you can give!

  • Re: Tecra A10 Fingerprint reader not working with IE 8

    I had various user names and passwords registered on numerous websites.
    From IE7, I could use the fingerprint reader to input the user name and passwords to these sites.
    Since Windows update installed IE8, the fingerprint system does not work within internet explorer - it works as normal for all other programs and logon.
    I figured out it must be a security thing in IE8, but cannot work out how to re-enable the fingerprint software into IE8.

    Hi
    This issue has been posted sever times here in the forum and it related to the compatibility issue between the old Fingerprint Truesuite access manager and IE8 and Firefox 3
    As far as I know the newer Truesuite access manager software v3.0 or higher should solve this issue.
    But we have to wait until such update will be published!
    Cheers

  • Z60t - ThinkVantage Fingerprint Software not working properly.

    I have reinstalled Windows XP multiple times over the past 4 years on this laptop, but this issure still hits me. I have never been able to find out why it does this. What is "this"? Glad you asked, because I might have gone on for pages.
    Basically, the "Fingerprints" and "Settings" menu choices are innaccessible. They always have, even on the pre-installed XP when I recieved this laptop for the 1st time. I only want easy accessibility to the Fingerprint functions.
    I have Client Security Solution installed and updated, because I couldn't do worth junk in the Fingerprint Software. After I set up the security, enrolled my fingerprints, and setup my power-on bios password, I went into the bios to reset the TPM. When I did that, I also wanted to change my power-on and supervisor password. With that done, I booted the system. The fingerprint software asked for my fingerprint before boot, and it successfully registered...but the password it tried to enter failed. Of course, I figured this would happen, but when I tried to find a way to change the power-on password saved in Client Security Solution, everything pointed to access that setting from the Fingerprint Software.
    I honestly need help, as it is aggravating to enter Supervisor and Harddisk passwords at every boot. As a recap, the menu choices don't even highlight as I hover over them. I click on them, and they don't respond with anything.
    Thanks in advance.

    There was an already existing thread about this.
    http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&thread.id=26&view=by_date_ascending&page=1

  • Dreamweaver respond.min.js=Not working with IE7 & IE8

    Six months ago I purchased Dreamweaver CS6 to have my site more interactive, I'm new to Web development.
    My computer system is Windows 7 with IE9, when testing my new site all went well, until I uploaded and learned about Internet Explorer Developer Tools, which has cross browser mode to test IE 7 & 8 versions.
    Unfortunately my site shows phone view first in IE7 and IE8.
    Link to my site http://www.angelsbyangels.com
    I have learned that “html5shiv.googlecode.com/svn/trunk/html5.js" and "respond.min.js”
    are not working properly with my site  in IE 7 & 8.
    I AM Grateful for your help.
    mlfa

    Hi mlfa,
    Can you chek out the following discussion on min.js and IE8, and try Sudarshan's solution?
    respond.min.js and IE8 (http://forums.adobe.com/thread/1173020).
    Thanks,
    Preran

  • Satellite Pro A300 - FN Key not working with xp downgrade

    I have just purchased a Toshiba Satellite Pro A300 and downgraded the o/s to XP.
    There is a problem with the FN key on the keyboard, it does not function. I dont know if this has something to do with the xp downgrade?
    Any ideas please?

    If you have downgraded to Windows XP with the Microsoft disk you must install the Toshiba utilities and Hotkey Utility.
    This is necessary for the FN keys in Windows XP so check the Toshiba website for these utilities:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

  • Satellite A210 - FN buttons are not working with another OS

    Hello,
    I've reinstalled my Toshiba Satellite A210-1BX with another Win OS
    My problem is, that the Fn - button doesn't work and the pop down on the top of the screen isn't there.
    Which driver or programm will I need to install that function? I have installes all driver from the Toshiba site :-/
    Thanks

    To be honest your posting is a little bit confusing.
    First of all the Satellite A210-1BX belongs to the PSAELE series.
    All drivers can be downloaded from the Toshiba European driver page.
    If you are using Vista then install all the drivers from the Toshiba page.
    The VAP (2 or 6 buttons) has nothing to do with FN buttons.
    The 2 or 6 button version is related to the Toshiba Control buttons above the F1-F12 button row.
    The FN buttons will work using the right BIOS (the newest one) and the Value Added Package v1.1.7.

  • Satellite L300-1A3 - Microphone is not working with Windows 7

    Hello, I have a problem with integrated microphone on my laptop.
    Mic comes with web cam chicony and under Windows 7 camera works just fine but microphone don't work at all.
    Does anybody have solution to that problem?
    Under vista microphone is working fine but I wanted to try Windows 7 on laptop and everything is working excellent except microphone.
    Regards in advance.

    Thanks for reply. Strange is that all hardware has been properly installed, i have installed drivers from: chipset including graphic and sound card, lan, wlan, camera, aver tv card in express card slot, and everything is working great, except integrated microphone. Camera and sound are installed with vista drivers and both are working well. Win 7 in general is much better for this laptop than vista, runs very fast and stable. I will rather buy external microphone, if this couldn't be sorted out, then installing vista again.

Maybe you are looking for