Satellite U200-181: How can I check if Trusted Platform Module is present

How can I check Trusted Platform module is present or not?

Hi
The configuration of TPM (trusted platform module) is carried out in the BIOS setup program and this function is provided only with some models.
I dont know if the U200-181 supports this or not but you can check it yourself.
The security controller settings should be available in BIOS system Setup on the second site.
If the unit supports the TPM you should see the switch to enable or disable this security option. Usually as per default the TPM is disabled.

Similar Messages

Satellite U200-181 - How to add extra RAM?

Hi
I've enjoyed my U200-181 very much, but would like to have some extra RAM in addition to 512 Mb installed by default. How can I do that?
How many SO-DIMM slots available? Are there any disassembly instructions?
Thanks in advance

changing the memory is very easy.
1. pull off the black strip above the keyboard (it just snaps in place)
2. remove the 2 screws
3. pivot keyboard forward being careful not to damage keyboard cable
4. remove 2 screws on big metal plate on the right.
5. remove plate to expose 2 x ddr2 200 pin sodimm slots.

How can I see the quantity of battery cycles on Satellite U200-181?

I have Satellite U200-181, and I use it hard, every. I want to be ready replace my battery, when it will have 400 cycles.
How can I see the quantity of battery cycles on my laptop?

You must not see this. You will see that capacity of the battery drops down and will be empty after short time. Nobody say that you will be able to use battery 400 cycles only. Maybe you will be lucky and the battery will have longer life time.
My Tecra M1 is about 4 years old and still working with original battery.
Your question is pretty unusual and I am really interested about further comments.

How to reset password on Satellite U200-181?

Greetings!
Sorry for my English.
I have notebook Toshiba Satellite U200-181 and all documents from it (check, warranty).
When the computer starts, it demands to enter the BIOS password... I called in the service center in Russia, but they told me then they have not any Response Codes
I have PC Serial No. and Challenge Code... What I need doing now? I dont want pay about 70$ for reset password... please help :)
Best Regards, Sergey

Hello Sergey
Please do not be mad on me but you do not understand how it works. To reset BIOS password Toshiba control center needs code given by your notebook model. After short time they send one new code back and after entering this code the BIOS password will be deleted.
Just authorized service provider in your country can contact Toshiba control center and just service will get the information back. With short words: private person like you have no chance to delete BIOS password. I hope you understand it why. If not let me know I will explain you.
Sorry but you must contact service.

Satellite U200-181 Built-in HDD ERROR

I've bought "Toshiba Satellite U200-181" 2 weeks ago. Recently (2-3 days ago) Ive got problem with built-in HDD.
So the problem is that sometimes I'm getting the message "Built-in HDD ERROR" during Notebook startup. This message "Built-in HDD ERROR" appears from time to time and system stops booting from HDD, but can boot from other bootable devices. First time when message "Built-in HDD ERROR" occurred, it was accompanied by lot of strange clapper pop noise from inside of the Notebook. All other
"Built-in HDD ERROR" messages were accompanied with not so loud and strange clapper pop noise, but still with some pop sounds (not as loud as at first time).
To identify possible problems I saved S.M.A.R.T. data log (see appendix#1).
Additional information: After I've purchased the Notebook Ive made successful BIOS upgrade from version 1.40 to version 1.50 strictly according Toshiba official web-site instructions. After BIOS upgrade system worked well, no ERRORS, no faults. But 3days ago I got "Built-in HDD ERROR" message.
Any ideas? Thank you.
Appendix: #1
================================================== ==========
This report created by Active SMART
http://www.ariolic.com/activesmart/
================================================== ==========
S.M.A.R.T. status
Date: 2007/01/18 20:05:32
Model Name: HTS541080G9SA00
Serial number: MPBDL0XKKE3RBG
Capacity: 80.0 GB
Firmware: MB4OC60R
Drive interface: IDE
Current temperature: 35 C (95 F)
Attribute Name Threshold Value Worst Raw value
1 (01) Raw Read Error Rate 62 100 100 0
2 (02) Throughput Performance 40 100 100 0
3 (03) Spin Up Time 33 253 253 55834574849
4 (04) Start/Stop Count 0 100 100 363
5 (05) Reallocated Sectors Count 5 100 100 0
7 (07) Seek Error Rate 67 100 100 0
8 (08) Seek Time Performance 40 100 100 0
9 (09) Power-On Hours 0 100 100 194
10 (0A) Spin Retry Count 60 100 100 0
12 (0C) Device Power Cycle Count 0 100 100 256
191 (BF) G-sense Error Rate 0 100 100 0
192 (C0) Power-off Retract Count 0 100 100 5177348
193 (C1) Load/Unload Cycle Count 0 100 100 4300
194 (C2) Temperature 0 157 157 231929348131
196 (C4) Reallocation Event Count 0 100 100 0
197 (C5) Current Pending Sector Count 0 100 100 0
198 (C6) Uncorrectable Sector Count 0 100 100 0
199 (C7) UltraDMA CRC Error Count 0 200 253 0

I recommend you to contact Toshiba service partner in your country as soon as possible. The unit is new one and something like this should not happen. Explain them the situation and you will see what they can do about it.
You can also contact your local dealer and try to exchange the unit to new one.

Satellite U200-181. Slow touchpad under Linux

I use two operating systems on my Toshiba Satellite U200-181.
They are: MS Windows XP Home, and Debian GNU Linux Etch (stable).
In MS Windows XP all the touchpad 's functions work fine, but there are some troubles under Linux:
- cursor is moving very slowly when I am moving my finger over touchpad surface. Changind pointer speed acceleration in mouse preference dialog does nothing (I use Gnome 2 desktop environment).
- tapping on the touchpad surface does not emulate left button pressing as it does in MS Windows.
Can anybody help me to configure touchpad so that it works in Linux as it does in MS Windows.
Thank you, Mikhail.

Well you should use this app
http://qsynaptics.sourceforge.net/
Also touchpad and mouse movement can be adjusted by adjusting /etc/X11/xorg.conf file (but be carefull allways create backup).
Try to type something like this
Section "InputDevice"
Identifier "Alps Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/event2"
Option "Protocol" "event"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "10"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.45"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.020"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "true"
EndSection

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

Control-k key binding broken. How can I check and change my key bindings?

I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
Thank you!

Basing on your input, you should get the following values:
1) session keys
SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
2) host cryptogram
1B781553209748EA
3) Retail MAC
01761103B810F00E
Summing up, the External Authenticate command should have the following value: 84 82 01 00 10 1B781553209748EA 01761103B810F00E.
Try to compare it with your results.
Regards

My MacBook Pro is running very slow. How can I check is out?

.My MacBook Pro is running very slow. How can I check is out?

Backup your data. Your disk/SSD may be failing.
What has changed lately?
- Has your disk/SSD filled up recently?
          How much free space?
          Less than 10 GB?
          Less than 20 GB?
- Did you upgrade OS X recently (for example from 10.8 to 10.9 or 10.9 to 10.9.1)?
- Have you installed any 3rd-party software recently?
Run Disk Utility (from the Applications > Utilities folder).
- Click on the system disk (Macintosh HD) and Verify Disk.
- Does it report errors or does it finish normally?
Try an SMC Reset.
http://support.apple.com/kb/HT3964
Boot in Safe Mode.
http://support.apple.com/kb/HT1564
When in Safe Mode does it operate normally?
After rebooting in normal mode is it faster?

I have two email accounts. It is only letting me check one. How can I check the other?

I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

Congratuations on your new iPad!
Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

How can multiple check boxes be added at one time to a form?

How can multiple check boxes be added at one time to a form?

Thanks for your response, but copying and pasting creates a link. If the user places a check mark in one of the boxes, all the rest of the boxes will have a check mark also. I will research this some more.
Carol Deatherage
Receptionist
Novar/Honeywell
1000 SE 14th Street
Bentonville, AR 72712
Office: (800) 341-7795
Fax: (479) 271-0657
[email protected]<mailto:[email protected]>
Your feedback is important to us! Please take a moment to rate this response.
Click Here to Access the Survey<https://www.surveymonkey.com/s/NovarSurvey>!
This email and any files transmitted with it are confidential and intended solely for the individual or entity to whom they are addressed. If you have received this email in error destroy it immediately.
Novar Confidential ***

How can I check my MobileMe mail & contacts from another iPhone?

How can I check in on my MobileMe email & contacts from another iPhone or iPad, not my own? When I go to Me.com, the only option it offers is to set up the iPhone with my account -- which is NOT what I want. Is there a workaround or another path to login that doesn't force the "setup"' page on me?

What a dumb decision. It would seem sensible that a mobile visitor to me.com should be able to proceed to the "regular" website and check mail, etc., through the web interface. Obviously -- well, okay, maybe not, but it puzzles me! You might be (as I tried, yesterday) vising the site through the browser on your wife's iPhone, which is already set up with an account there (and it would require cancelling her log-in and completely resetting her iPhone to proceed on the path Apple now requires!), or ya might be using a friend's iPad (my next attempt, a few minutes later!), or etc. etc. etc. Ooops! Brick wall! No options.
Seems like a counter-productive decision, one that's certain to be counter to common-sense needs and goals of Apple users; I can't be the first person to find this dead-end to be frustrating and contrary to expectations. Okay, I have my rant finished, now.
Apple, what was the problem that you were so determined to "fix" with this, ummm, feature? Howsabout a little tiny button hidden in greyscale that allows you to contine to the website, or a forcing URL that bypasses the mobile "set-up" interception? Help?
Thanks, gdgmacguy -- full credit for the answer! Darn it!
Oops, for some reason it credited ME with the correct answer. I'll try to contact Apple support to get it credited to you. This is apparently a screwup in my posting.

How can I check if infinity will be enabled on my ...

Friends of mine can get infinity and live just a few streets away, how can i check that my cab will be upgraded? Postcode is tf1 3lf
Any help appreciated

use this checker http://www.dslchecker.bt.com/adsl/ADSLChecker.TelephoneNumberOutput it will tell you when your cabinet has gone live
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How can you check a different iCloud account in safari in an iPad?

How can you check a different iCloud account in safari in an iPad?

As currently designed, you cannot. Once iCloud detects you are on mobile Safari, it switches you to the iPad screen.
If you had another browser that would allow you to pretend you were a desktop Safari client, ie8 or 9, or Firefox, that might work.
But, Puffin and Opera mini don't work.
Gary

Satellite U200-181: How can I check if Trusted Platform Module is present

Similar Messages

Maybe you are looking for